programming ppcboot onto an sbc8260 with a vision ice

[Peter Desnoyers]

You need to take the ELF file, ppcboot, and convert it into a .bin file
using the vision ICE convert utility.

The file format referred to as "BIN" in the visionICE documentation
isn't a real binary image - it has a special header.

Andrew Dixon wrote:
>
> Hi All,
>
> I'm trying to put ppcboot onto my sbc8260 board using a vision ice and I
> was wondering if there is a preferred way to do this?  I've compiled
> ppcboot on a native gcc-2.95 with the commands:
>
> $make sbc8260_config
> $make
>
> and I get a binary file ppcboot.bin.  When I try to program the
> ppcboot.bin onto the flash it complains that the format is not
> recognized as mpc8260 code.
>
> Any ideas on what I'm doing wrong?
>
> Thanks,
> Andy
>

--
.....................................................................
 Peter Desnoyers            (781) 457-1165   pdesnoyers at chinook.com
 Chinook Communications     (617) 661-1979   pjd at fred.cambridge.ma.us
 100 Hayden Ave, Lexington MA 02421

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/