IIC write

[ajay.kunnath at exgate.tek.com]

Hello,

I need to write some data into an EEPROM using the iic bus. From the MPC860
user manual I was not able to figure out the method to send the trasmit
buffer.

As per the manual, I need to mention the device address as the first byte to
be transmitted i.e. first byte in tbdf->cbd_bufadr . If so, where do I
mention
the actual buffer which contains the data that needs to be written to the
EEPROM ?

I would greatly appreciate any help.

Thanks,
Ajay

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/