Dan Malek dan at
Thu Jun 8 03:09:55 EST 2000

Grant Carter wrote:

> Sorry I forgot to mention that this was for an 823.

Ooops.  I guess I should read ahead......

To make SMC2 work on the 823/850 you need to set bits 8 and 9 in
port A papar, clear those bits in padir, and you probably want to
set bit 9 in paodr (it may not be necessary, but it is logically correct).
Everything else in the driver should be OK.

	-- Dan

** Sent via the linuxppc-embedded mail list. See

More information about the Linuxppc-embedded mailing list