Kernel panic: No init found.

[mlocke at jps.net]

you really should contact MV support for this kind of stuff (if you have
a support contract).

Ot is something with your basic setup.  Did you add the /opt.../target
directory to /etc/exports ? if so, did you restart the nfs server?  is
the nfs server running?

Nils Hagge wrote:
>
> Hi,
>
> I try to run Hard Hat Linux from Montavista as described in the CDK 1.2
> manual on an RPX lite board.
> Unfortunately, the installation procedure is only for hosts with Red Hat
> Linux, I hoped this would work for SuSE, too.
>
> The problem has to do with the NFS filesystem. I can successfully download a
> precompiled
> Hard Hat Linux boot-image via TFTP and monitor this with the serial port.
>
> The following is the output over the serial port...
>
>  target IP address : 824B8932
>  target file name  : rpxlite.srec
>  address bias      : 0
> Starting tftp download:
> inetARP(): OK
> .1.2.4.8.16.32.64.128.256.512.1024.2048.4096.8192
> load_tftp(): OK
> 1087283 data bytes, 13764 S-records, 2124 tftp blocks, 0 repeated blocks
> start address = 00200000
> load_tftp_toMem(): OK
> Transferring control to downloaded program
> loaded at:     00200000 0020B1FC
> relocated to:  00180000 0018B1FC
> boart
ata at: 001801C8 001801E4
> relocated to:  00200100 0020011C
> zimage at:     00206000 0026A4C4
> avail ram:     0026B000 01000000
>
> Linux/PPC load: root=/dev/nfs rw nfsroot=/opt/hardhat/devkit/ppc/8xx/target
> Uncompressing Linux...done.
> Now booting the kernel
> Linux version 2.2.14 (root at rodan.mvista.com) (gcc version 2.95.2 19991030
> (2.95.
> 3 prerelease/franzo)) #1 Tue Aug 8 02:01:27 PDT 2000
> Boot arguments: root=/dev/nfs rw nfsroot=/opt/hardhat/devkit/ppc/8xx/target
> time_init: decrementer frequency = 240000000/60
> Calibrating delay loop... 63.69 BogoMIPS
> Memory: 15152k available (740k kernel code, 456k data, 36k init)
> [c0000000,c1000
> IP Protocols: ICMP, UDP, TCP
> TCP: Hash tables configured (ehash 16384 bhash 16384)
> Initializing RT netlink socket
> Starting kswapd v 1.5
> CPM UART driver version 0.03
> ttyS00 at 0x0280 is a SMC
> ttyS01 at 0x0380 is a SMC
> pty: 256 Unix98 ptys configured
> RAM disk driver initialized:  16 RAM disks of 4096K size
> loop: registered device at major 7
> eth0: CPM ENET Version 0.2, 00:10:ec:00:1b:fb
> PPP: version 2.3.7 (demand dialling)
> TCP compression code copyright 1989 Regents of the University of California
> PPP line discipline registered.
> Sending BOOTP requests.... OK
> IP-Config: Got BOOTP answer from 130.75.137.50, my address is 130.75.137.59
> Looking up port of RPC 100003/2 on 130.75.137.50
> Looking up port of RPC 100005/1 on 130.75.137.50
> VFS: Mounted root (NFS filesystem).
> Freeing unused kernel memory: 36k init
> Kernel panic: No init found.  Try passing init= option to kernel.
> Rebooting in 180 seconds..
>
> ----snip----
>
> The filesystem seems to be mounted, but it does not find any files in there
> although the full "linux tree" is available. I also tried adding
>   init=/bin/init   init=bin/init    init=/opt/.../target/bin/init
> to the boot arguments, but nothing helped.
>
> Do you know that problem or have an idea? Any help is welcome. Thank in
> advance.
>
> Nils Hagge
>>bN
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/