[PATCH 3/5] drm/radeon: Raise msi_addr_mask to 40 bits for pre-Bonaire

[Christian König]

On 12/24/25 04:10, Vivian Wang wrote:
> The code was originally written using no_64bit_msi, which restricts the
> device to 32-bit MSI addresses.
> 
> Since msi_addr_mask is introduced, use DMA_BIT_MASK(40) instead of
> DMA_BIT_MASK(32) here for msi_addr_mask, describing the restriction more
> precisely and allowing these devices to work on platforms with MSI
> doorbell address above 32-bit space, as long as it is within the
> hardware restriction of 40-bit space.
> 
> Signed-off-by: Vivian Wang <wangruikang at iscas.ac.cn>
> ---
>  drivers/gpu/drm/radeon/radeon_irq_kms.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
> index d550554a6f3f..ea519d43348b 100644
> --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
> +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
> @@ -251,8 +251,8 @@ static bool radeon_msi_ok(struct radeon_device *rdev)
>  	 * IBM POWER servers, so we limit them
>  	 */
>  	if (rdev->family < CHIP_BONAIRE) {
> -		dev_info(rdev->dev, "radeon: MSI limited to 32-bit\n");
> -		rdev->pdev->msi_addr_mask = DMA_BIT_MASK(32);
> +		dev_info(rdev->dev, "radeon: MSI limited to 40-bit\n");
> +		rdev->pdev->msi_addr_mask = DMA_BIT_MASK(40);

Well, that is not even remotely correct.

Please move that close to the dma_set_mask_and_coherent() call in radeon_device_init() (file radeon_device.c).

The check there is most likely already what you need. Should be pretty straight forward.

Regards,
Christian.

>  	}
>  
>  	/* force MSI on */
>