[PATCH v2 1/3] powerpc: sstep: Fix load and update emulation

[Segher Boessenkool]

On Wed, Mar 03, 2021 at 10:01:27PM +0530, Naveen N. Rao wrote:
> On 2021/03/01 08:37PM, Segher Boessenkool wrote:
> > > And, r6 always ends up with 0xaea. It changes with the value I put into 
> > > r6 though.
> > 
> > That is exactly the behaviour specified for p8.  0aaa+0040=0aea.
> > 
> > > Granted, this is all up in the air, but it does look like there is more 
> > > going on and the value isn't the EA or the value at the address.
> > 
> > That *is* the EA.  The EA is the address the insn does the access at.
> 
> I'm probably missing something here. 0xaaa is the value I stored at an 
> offset of 64 bytes from the stack pointer (r1 is copied into r6). In the 
> ldu instruction above, the EA is 64(r6), which should translate to 
> r1+64.  The data returned by the load would be 0xaaa, which should be 
> discarded per the description you provided above. So, I would expect to 
> see a 0xc0.. address in r6.

Yes, I misread your code it seems.

> In fact, this looks to be the behavior documented for P9:
> 
> > > Power9 does:
> > >
> > >   Load with Update Instructions (RA = 0)
> > >     EA is placed into R0.
> > >   Load with Update Instructions (RA = RT)
> > >     The storage operand addressed by EA is accessed. The 
> > >     displacement
> > >     field is added to the data returned by the load and placed into 
> > >     RT.

Yup.  So on what cpu did you test?

Either way, the kernel should not emulate any particular cpu here, I'd
say, esp. since recent cpus do different things for this invalid form.


Segher