[PATCH v2 devicetree 1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch

[Maxim Kochetkov]

Reviewed-by: Maxim Kochetkov <fido_max at inbox.ru>


29.09.2020 14:32, Vladimir Oltean пишет:
> Add the description of the embedded L2 switch inside the SoC dtsi file
> for NXP T1040.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
> Changes in v2:
> Make switch node disabled by default.
> 
>   arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 76 +++++++++++++++++++++
>   1 file changed, 76 insertions(+)
> 
> diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> index 315d0557eefc..5cb90c66cd3f 100644
> --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> @@ -628,6 +628,82 @@ mdio at fd000 {
>   			status = "disabled";
>   		};
>   	};
> +
> +	seville_switch: ethernet-switch at 800000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "mscc,vsc9953-switch";
> +		reg = <0x800000 0x290000>;
> +		little-endian;
> +		status = "disabled";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			seville_port0: port at 0 {
> +				reg = <0>;
> +				status = "disabled";
> +			};
> +
> +			seville_port1: port at 1 {
> +				reg = <1>;
> +				status = "disabled";
> +			};
> +
> +			seville_port2: port at 2 {
> +				reg = <2>;
> +				status = "disabled";
> +			};
> +
> +			seville_port3: port at 3 {
> +				reg = <3>;
> +				status = "disabled";
> +			};
> +
> +			seville_port4: port at 4 {
> +				reg = <4>;
> +				status = "disabled";
> +			};
> +
> +			seville_port5: port at 5 {
> +				reg = <5>;
> +				status = "disabled";
> +			};
> +
> +			seville_port6: port at 6 {
> +				reg = <6>;
> +				status = "disabled";
> +			};
> +
> +			seville_port7: port at 7 {
> +				reg = <7>;
> +				status = "disabled";
> +			};
> +
> +			seville_port8: port at 8 {
> +				reg = <8>;
> +				phy-mode = "internal";
> +				status = "disabled";
> +
> +				fixed-link {
> +					speed = <2500>;
> +					full-duplex;
> +				};
> +			};
> +
> +			seville_port9: port at 9 {
> +				reg = <9>;
> +				phy-mode = "internal";
> +				status = "disabled";
> +
> +				fixed-link {
> +					speed = <2500>;
> +					full-duplex;
> +				};
> +			};
> +		};
> +	};
>   };
>   
>   &qe {
>