[PATCH devicetree 4/4] powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

[Vladimir Oltean]

Define the network interface names for the switch ports and hook them up
to the 2 QSGMII PHYs that are onboard.

A conscious decision was taken to go along with the numbers that are
written on the front panel of the board and not with the hardware
numbers of the switch chip ports. The 2 are shifted by 4.

Signed-off-by: Vladimir Oltean <olteanv at gmail.com>
---
 arch/powerpc/boot/dts/fsl/t1040rdb.dts | 111 +++++++++++++++++++++++++
 1 file changed, 111 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index 40d7126dbe90..28ee06a1706d 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -75,4 +75,115 @@ &mdio0 {
 	phy_sgmii_2: ethernet-phy at 3 {
 		reg = <0x3>;
 	};
+
+	/* VSC8514 QSGMII PHY */
+	phy_qsgmii_0: ethernet-phy at 4 {
+		reg = <0x4>;
+	};
+
+	phy_qsgmii_1: ethernet-phy at 5 {
+		reg = <0x5>;
+	};
+
+	phy_qsgmii_2: ethernet-phy at 6 {
+		reg = <0x6>;
+	};
+
+	phy_qsgmii_3: ethernet-phy at 7 {
+		reg = <0x7>;
+	};
+
+	/* VSC8514 QSGMII PHY */
+	phy_qsgmii_4: ethernet-phy at 8 {
+		reg = <0x8>;
+	};
+
+	phy_qsgmii_5: ethernet-phy at 9 {
+		reg = <0x9>;
+	};
+
+	phy_qsgmii_6: ethernet-phy at a {
+		reg = <0xa>;
+	};
+
+	phy_qsgmii_7: ethernet-phy at b {
+		reg = <0xb>;
+	};
+};
+
+&seville_port0 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_0>;
+	phy-mode = "qsgmii";
+	/* ETH4 written on chassis */
+	label = "swp4";
+	status = "okay";
+};
+
+&seville_port1 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_1>;
+	phy-mode = "qsgmii";
+	/* ETH5 written on chassis */
+	label = "swp5";
+	status = "okay";
+};
+
+&seville_port2 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_2>;
+	phy-mode = "qsgmii";
+	/* ETH6 written on chassis */
+	label = "swp6";
+	status = "okay";
+};
+
+&seville_port3 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_3>;
+	phy-mode = "qsgmii";
+	/* ETH7 written on chassis */
+	label = "swp7";
+	status = "okay";
+};
+
+&seville_port4 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_4>;
+	phy-mode = "qsgmii";
+	/* ETH8 written on chassis */
+	label = "swp8";
+	status = "okay";
+};
+
+&seville_port5 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_5>;
+	phy-mode = "qsgmii";
+	/* ETH9 written on chassis */
+	label = "swp9";
+	status = "okay";
+};
+
+&seville_port6 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_6>;
+	phy-mode = "qsgmii";
+	/* ETH10 written on chassis */
+	label = "swp10";
+	status = "okay";
+};
+
+&seville_port7 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_7>;
+	phy-mode = "qsgmii";
+	/* ETH11 written on chassis */
+	label = "swp11";
+	status = "okay";
+};
+
+&seville_port8 {
+	ethernet = <&enet0>;
+	status = "okay";
 };
-- 
2.25.1