[PATCH 05/14] powerpc/eeh: Kill off eeh_ops->get_pe_addr()
Oliver O'Halloran
oohall at gmail.com
Mon Jul 13 21:11:33 AEST 2020
On Mon, Jul 13, 2020 at 7:54 PM Alexey Kardashevskiy <aik at ozlabs.ru> wrote:
>
>
>
> On 06/07/2020 11:36, Oliver O'Halloran wrote:
> > This is used in precisely one place which is in pseries specific platform
> > code. There's no need to have the callback in eeh_ops since the platform
> > chooses the EEH PE addresses anyway. The PowerNV implementation has always
> > been a stub too so remove it.
> >
> > Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
> > ---
> > arch/powerpc/include/asm/eeh.h | 1 -
> > arch/powerpc/platforms/powernv/eeh-powernv.c | 13 ------------
> > arch/powerpc/platforms/pseries/eeh_pseries.c | 22 ++++++++++----------
> > 3 files changed, 11 insertions(+), 25 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
> > index 3d648e042835..1bddc0dfe099 100644
> > --- a/arch/powerpc/include/asm/eeh.h
> > +++ b/arch/powerpc/include/asm/eeh.h
> > @@ -220,7 +220,6 @@ struct eeh_ops {
> > int (*init)(void);
> > struct eeh_dev *(*probe)(struct pci_dev *pdev);
> > int (*set_option)(struct eeh_pe *pe, int option);
> > - int (*get_pe_addr)(struct eeh_pe *pe);
> > int (*get_state)(struct eeh_pe *pe, int *delay);
> > int (*reset)(struct eeh_pe *pe, int option);
> > int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len);
> > diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
> > index 79409e005fcd..bcd0515d8f79 100644
> > --- a/arch/powerpc/platforms/powernv/eeh-powernv.c
> > +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
> > @@ -535,18 +535,6 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
> > return 0;
> > }
> >
> > -/**
> > - * pnv_eeh_get_pe_addr - Retrieve PE address
> > - * @pe: EEH PE
> > - *
> > - * Retrieve the PE address according to the given tranditional
> > - * PCI BDF (Bus/Device/Function) address.
> > - */
> > -static int pnv_eeh_get_pe_addr(struct eeh_pe *pe)
> > -{
> > - return pe->addr;
> > -}
> > -
> > static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
> > {
> > struct pnv_phb *phb = pe->phb->private_data;
> > @@ -1670,7 +1658,6 @@ static struct eeh_ops pnv_eeh_ops = {
> > .init = pnv_eeh_init,
> > .probe = pnv_eeh_probe,
> > .set_option = pnv_eeh_set_option,
> > - .get_pe_addr = pnv_eeh_get_pe_addr,
> > .get_state = pnv_eeh_get_state,
> > .reset = pnv_eeh_reset,
> > .get_log = pnv_eeh_get_log,
> > diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
> > index 18a2522b9b5e..088771fa38be 100644
> > --- a/arch/powerpc/platforms/pseries/eeh_pseries.c
> > +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
> > @@ -32,6 +32,8 @@
> > #include <asm/ppc-pci.h>
> > #include <asm/rtas.h>
> >
> > +static int pseries_eeh_get_pe_addr(struct pci_dn *pdn);
> > +
> > /* RTAS tokens */
> > static int ibm_set_eeh_option;
> > static int ibm_set_slot_reset;
> > @@ -301,7 +303,7 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
> > eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
> > } else {
> > /* Retrieve PE address */
> > - edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
> > + edev->pe_config_addr = pseries_eeh_get_pe_addr(pdn);
> > pe.addr = edev->pe_config_addr;
> >
> > /* Some older systems (Power4) allow the ibm,set-eeh-option
> > @@ -431,8 +433,10 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
> > * It's notable that zero'ed return value means invalid PE config
> > * address.
> > */
> > -static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
> > +static int pseries_eeh_get_pe_addr(struct pci_dn *pdn)
> > {
> > + int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
>
> Why not use pe->config_addr
I wanted to get rid of the PE argument. The only caller
(pseries_eeh_init_edev()) doesn't even pass a real PE, just the "fake"
PE which only has one initialised field which is... sketch IMO. The
other reason is for Wen's post-kdump pseries PHB reset patch. In that
situation we want the reset to be done before we've done any PCI setup
so there won't be any eeh_pe structures available. We will however
have pci_dn's since they're set up before we start scanning PHBs. I
also think some of the "fake pe" stuff in pseries_eeh_init_edev() is
broken so the fewer users of that we have the better.
> (and why we have two addresses in eeh_pe anyway)?
I don't know :(
It's one of those things I've been meaning to look at but haven't
found the will to jump down that particular rabbit hole.
I did take a cursory look and there's some comments about pe->addr
being zero in some cases so EEH falls back to matching on
pe->config_addr when searching for a PE. IIRC when I looked I couldn't
work out why pe->config_addr would ever be zero. On PowerNV zero is a
valid PE address and we set the EEH_VALID_PE_ZERO flag to disable that
fallback logic so the reason is probably some weird pseries thing.
> Ah, I guess I just trust you with this one :)
>
>
> Reviewed-by: Alexey Kardashevskiy <aik at ozlabs.ru>
>
>
>
>
> > + int buid = pdn->phb->buid;
> > int ret = 0;
> > int rets[3];
> >
> > @@ -443,18 +447,16 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
> > * meaningless.
> > */
> > ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
> > - pe->config_addr, BUID_HI(pe->phb->buid),
> > - BUID_LO(pe->phb->buid), 1);
> > + config_addr, BUID_HI(buid), BUID_LO(buid), 1);
> > if (ret || (rets[0] == 0))
> > return 0;
> >
> > /* Retrieve the associated PE config address */
> > ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
> > - pe->config_addr, BUID_HI(pe->phb->buid),
> > - BUID_LO(pe->phb->buid), 0);
> > + config_addr, BUID_HI(buid), BUID_LO(buid), 0);
> > if (ret) {
> > pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
> > - __func__, pe->phb->global_number, pe->config_addr);
> > + __func__, pdn->phb->global_number, config_addr);
> > return 0;
> > }
> >
> > @@ -463,11 +465,10 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
> >
> > if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
> > ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
> > - pe->config_addr, BUID_HI(pe->phb->buid),
> > - BUID_LO(pe->phb->buid), 0);
> > + config_addr, BUID_HI(buid), BUID_LO(buid), 0);
> > if (ret) {
> > pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
> > - __func__, pe->phb->global_number, pe->config_addr);
> > + __func__, pdn->phb->global_number, config_addr);
> > return 0;
> > }
> >
> > @@ -839,7 +840,6 @@ static struct eeh_ops pseries_eeh_ops = {
> > .init = pseries_eeh_init,
> > .probe = pseries_eeh_probe,
> > .set_option = pseries_eeh_set_option,
> > - .get_pe_addr = pseries_eeh_get_pe_addr,
> > .get_state = pseries_eeh_get_state,
> > .reset = pseries_eeh_reset,
> > .get_log = pseries_eeh_get_log,
> >
>
> --
> Alexey
More information about the Linuxppc-dev
mailing list