[PATCH 2/3] powerpc/sysfs: Show idle_purr and idle_spurr for every CPU

[Kamalesh Babulal]

On 11/27/19 5:31 PM, Gautham R. Shenoy wrote:
> From: "Gautham R. Shenoy" <ego at linux.vnet.ibm.com>
> 
> On Pseries LPARs, to calculate utilization, we need to know the
> [S]PURR ticks when the CPUs were busy or idle.
> 
> The total PURR and SPURR ticks are already exposed via the per-cpu
> sysfs files /sys/devices/system/cpu/cpuX/purr and
> /sys/devices/system/cpu/cpuX/spurr.
> 
> This patch adds support for exposing the idle PURR and SPURR ticks via
> /sys/devices/system/cpu/cpuX/idle_purr and
> /sys/devices/system/cpu/cpuX/idle_spurr.

The patch looks good to me, with a minor file mode nit pick mentioned below.

> 
> Signed-off-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
> ---
>  arch/powerpc/kernel/sysfs.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
> index 80a676d..42ade55 100644
> --- a/arch/powerpc/kernel/sysfs.c
> +++ b/arch/powerpc/kernel/sysfs.c
> @@ -1044,6 +1044,36 @@ static ssize_t show_physical_id(struct device *dev,
>  }
>  static DEVICE_ATTR(physical_id, 0444, show_physical_id, NULL);
> 
> +static ssize_t idle_purr_show(struct device *dev,
> +			      struct device_attribute *attr, char *buf)
> +{
> +	struct cpu *cpu = container_of(dev, struct cpu, dev);
> +	unsigned int cpuid = cpu->dev.id;
> +	struct lppaca *cpu_lppaca_ptr = paca_ptrs[cpuid]->lppaca_ptr;
> +	u64 idle_purr_cycles = be64_to_cpu(cpu_lppaca_ptr->wait_state_cycles);
> +
> +	return sprintf(buf, "%llx\n", idle_purr_cycles);
> +}
> +static DEVICE_ATTR_RO(idle_purr);

per cpu purr/spurr sysfs file is created with file mode 0400. Using
DEVICE_ATTR_RO for their idle_* variants will create sysfs files with 0444 as
their file mode, you should probably use DEVICE_ATTR() with file mode 0400 to
have consist permission for both variants.

-- 
Kamalesh