[v5,1/7] QE: Add IC, SI and SIRAM document to device tree bindings.
qiang.zhao at nxp.com
Tue May 17 11:18:52 AEST 2016
On Tue, May 17, 2016 at 07:22AM, Scott Wood wrote:
> -----Original Message-----
> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Tuesday, May 17, 2016 7:22 AM
> To: Qiang Zhao <qiang.zhao at nxp.com>
> Cc: robh+dt at kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; Xiaobo Xie <xiaobo.xie at nxp.com>; Yang-Leo Li
> <leoyang.li at nxp.com>; linuxppc-dev at lists.ozlabs.org
> Subject: Re: [v5,1/7] QE: Add IC, SI and SIRAM document to device tree
> On Wed, Mar 09, 2016 at 09:21:28AM +0800, Zhao Qiang wrote:
> > Add IC, SI and SIRAM document of QE to
> > Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> > Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> > Acked-by: Rob Herring <robh at kernel.org>
> > ---
> > changes for v2
> > - Add interrupt-controller in Required properties
> > - delete address-cells and size-cells for qe-si and qe-siram Changes
> > for v3
> > - Add SoC specific caompatible strings to qe-si and qe-siram Changes
> > for v4
> > - NA
> > Changes for v5
> > - NA
> > .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 50
> > ++++++++++++++++++++++
> > 1 file changed, 50 insertions(+)
> > +* Serial Interface Block (SI)
> > +
> > +The SI manages the routing of eight TDM lines to the QE block serial
> > +drivers , the MCC and the UCCs, for receive and transmit.
> > +
> > +Required properties:
> > +- compatible : should be "fsl,t1040-qe-si".
> > +- reg : Address range of SI register set.
> Is t1040 the only chip that has or will ever have this?
There also be t1024 and ls1043 supporting si.
I thought to add them when adding their device node.
If you think it is better to add them now, I will modify.
More information about the Linuxppc-dev