[PATCH v9 02/26] powerpc/powernv: Cleanup on pci_controller_ops instances
Gavin Shan
gwshan at linux.vnet.ibm.com
Tue May 3 15:41:21 AEST 2016
This cleans up on below data struct instances to use tab instead of
space indent of statement to avoid complains from scripts/checkpatch.pl.
No logical changes introduced.
@pnv_pci_ioda_controller_ops
@pnv_npu_ioda_controller_ops
Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja at axtens.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 36 +++++++++++++++----------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index c5baaf3..524c9c7 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3210,31 +3210,31 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
}
static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
- .dma_dev_setup = pnv_pci_dma_dev_setup,
- .dma_bus_setup = pnv_pci_dma_bus_setup,
+ .dma_dev_setup = pnv_pci_dma_dev_setup,
+ .dma_bus_setup = pnv_pci_dma_bus_setup,
#ifdef CONFIG_PCI_MSI
- .setup_msi_irqs = pnv_setup_msi_irqs,
- .teardown_msi_irqs = pnv_teardown_msi_irqs,
+ .setup_msi_irqs = pnv_setup_msi_irqs,
+ .teardown_msi_irqs = pnv_teardown_msi_irqs,
#endif
- .enable_device_hook = pnv_pci_enable_device_hook,
- .window_alignment = pnv_pci_window_alignment,
- .reset_secondary_bus = pnv_pci_reset_secondary_bus,
- .dma_set_mask = pnv_pci_ioda_dma_set_mask,
- .dma_get_required_mask = pnv_pci_ioda_dma_get_required_mask,
- .shutdown = pnv_pci_ioda_shutdown,
+ .enable_device_hook = pnv_pci_enable_device_hook,
+ .window_alignment = pnv_pci_window_alignment,
+ .reset_secondary_bus = pnv_pci_reset_secondary_bus,
+ .dma_set_mask = pnv_pci_ioda_dma_set_mask,
+ .dma_get_required_mask = pnv_pci_ioda_dma_get_required_mask,
+ .shutdown = pnv_pci_ioda_shutdown,
};
static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
- .dma_dev_setup = pnv_pci_dma_dev_setup,
+ .dma_dev_setup = pnv_pci_dma_dev_setup,
#ifdef CONFIG_PCI_MSI
- .setup_msi_irqs = pnv_setup_msi_irqs,
- .teardown_msi_irqs = pnv_teardown_msi_irqs,
+ .setup_msi_irqs = pnv_setup_msi_irqs,
+ .teardown_msi_irqs = pnv_teardown_msi_irqs,
#endif
- .enable_device_hook = pnv_pci_enable_device_hook,
- .window_alignment = pnv_pci_window_alignment,
- .reset_secondary_bus = pnv_pci_reset_secondary_bus,
- .dma_set_mask = pnv_npu_dma_set_mask,
- .shutdown = pnv_pci_ioda_shutdown,
+ .enable_device_hook = pnv_pci_enable_device_hook,
+ .window_alignment = pnv_pci_window_alignment,
+ .reset_secondary_bus = pnv_pci_reset_secondary_bus,
+ .dma_set_mask = pnv_npu_dma_set_mask,
+ .shutdown = pnv_pci_ioda_shutdown,
};
static void __init pnv_pci_init_ioda_phb(struct device_node *np,
--
2.1.0
More information about the Linuxppc-dev
mailing list