[PATCH v5 08/18] cxl: IRQ allocation for guests

[Frederic Barrat]

The PSL interrupt cannot be multiplexed in a guest, as it is not
supported by the hypervisor. So an interrupt will be allocated
for it for each context. It will still be the first interrupt found in
the first interrupt range, but is treated almost like any other AFU
interrupt when creating/deleting the context. Only the handler is
different. Rework the code so that the range 0 is treated like the
other ranges.

Co-authored-by: Christophe Lombard <clombard at linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard at linux.vnet.ibm.com>
---
 drivers/misc/cxl/irq.c | 78 +++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 64 insertions(+), 14 deletions(-)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index 5033869..3c04c14 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -19,6 +19,13 @@
 #include "cxl.h"
 #include "trace.h"
 
+static int afu_irq_range_start(void)
+{
+	if (cpu_has_feature(CPU_FTR_HVMODE))
+		return 1;
+	return 0;
+}
+
 static irqreturn_t schedule_cxl_fault(struct cxl_context *ctx, u64 dsisr, u64 dar)
 {
 	ctx->dsisr = dsisr;
@@ -117,11 +124,23 @@ static irqreturn_t cxl_irq_afu(int irq, void *data)
 {
 	struct cxl_context *ctx = data;
 	irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq));
-	int irq_off, afu_irq = 1;
+	int irq_off, afu_irq = 0;
 	__u16 range;
 	int r;
 
-	for (r = 1; r < CXL_IRQ_RANGES; r++) {
+	/*
+	 * Look for the interrupt number.
+	 * On bare-metal, we know range 0 only contains the PSL
+	 * interrupt so we could start counting at range 1 and initialize
+	 * afu_irq at 1.
+	 * In a guest, range 0 also contains AFU interrupts, so it must
+	 * be counted for. Therefore we initialize afu_irq at 0 to take into
+	 * account the PSL interrupt.
+	 *
+	 * For code-readability, it just seems easier to go over all
+	 * the ranges on bare-metal and guest. The end result is the same.
+	 */
+	for (r = 0; r < CXL_IRQ_RANGES; r++) {
 		irq_off = hwirq - ctx->irqs.offset[r];
 		range = ctx->irqs.range[r];
 		if (irq_off >= 0 && irq_off < range) {
@@ -131,7 +150,7 @@ static irqreturn_t cxl_irq_afu(int irq, void *data)
 		afu_irq += range;
 	}
 	if (unlikely(r >= CXL_IRQ_RANGES)) {
-		WARN(1, "Recieved AFU IRQ out of range for pe %i (virq %i hwirq %lx)\n",
+		WARN(1, "Received AFU IRQ out of range for pe %i (virq %i hwirq %lx)\n",
 		     ctx->pe, irq, hwirq);
 		return IRQ_HANDLED;
 	}
@@ -141,7 +160,7 @@ static irqreturn_t cxl_irq_afu(int irq, void *data)
 	       afu_irq, ctx->pe, irq, hwirq);
 
 	if (unlikely(!ctx->irq_bitmap)) {
-		WARN(1, "Recieved AFU IRQ for context with no IRQ bitmap\n");
+		WARN(1, "Received AFU IRQ for context with no IRQ bitmap\n");
 		return IRQ_HANDLED;
 	}
 	spin_lock(&ctx->lock);
@@ -227,17 +246,33 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 {
 	int rc, r, i, j = 1;
 	struct cxl_irq_name *irq_name;
+	int alloc_count;
+
+	/*
+	 * In native mode, range 0 is reserved for the multiplexed
+	 * PSL interrupt. It has been allocated when the AFU was initialized.
+	 *
+	 * In a guest, the PSL interrupt is not mutliplexed, but per-context,
+	 * and is the first interrupt from range 0. It still needs to be
+	 * allocated, so bump the count by one.
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE))
+		alloc_count = count;
+	else
+		alloc_count = count + 1;
 
 	/* Initialize the list head to hold irq names */
 	INIT_LIST_HEAD(&ctx->irq_names);
 
 	if ((rc = cxl_ops->alloc_irq_ranges(&ctx->irqs, ctx->afu->adapter,
-							count)))
+							alloc_count)))
 		return rc;
 
-	/* Multiplexed PSL Interrupt */
-	ctx->irqs.offset[0] = ctx->afu->psl_hwirq;
-	ctx->irqs.range[0] = 1;
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		/* Multiplexed PSL Interrupt */
+		ctx->irqs.offset[0] = ctx->afu->psl_hwirq;
+		ctx->irqs.range[0] = 1;
+	}
 
 	ctx->irq_count = count;
 	ctx->irq_bitmap = kcalloc(BITS_TO_LONGS(count),
@@ -249,7 +284,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 	 * Allocate names first.  If any fail, bail out before allocating
 	 * actual hardware IRQs.
 	 */
-	for (r = 1; r < CXL_IRQ_RANGES; r++) {
+	for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) {
 		for (i = 0; i < ctx->irqs.range[r]; i++) {
 			irq_name = kmalloc(sizeof(struct cxl_irq_name),
 					   GFP_KERNEL);
@@ -279,15 +314,30 @@ static void afu_register_hwirqs(struct cxl_context *ctx)
 {
 	irq_hw_number_t hwirq;
 	struct cxl_irq_name *irq_name;
-	int r,i;
+	int r, i;
+	irqreturn_t (*handler)(int irq, void *data);
 
 	/* We've allocated all memory now, so let's do the irq allocations */
 	irq_name = list_first_entry(&ctx->irq_names, struct cxl_irq_name, list);
-	for (r = 1; r < CXL_IRQ_RANGES; r++) {
+	for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) {
 		hwirq = ctx->irqs.offset[r];
 		for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) {
-			cxl_map_irq(ctx->afu->adapter, hwirq,
-				    cxl_irq_afu, ctx, irq_name->name);
+			if (r == 0 && i == 0)
+				/*
+				 * The very first interrupt of range 0 is
+				 * always the PSL interrupt, but we only
+				 * need to connect a handler for guests,
+				 * because there's one PSL interrupt per
+				 * context.
+				 * On bare-metal, the PSL interrupt is
+				 * multiplexed and was setup when the AFU
+				 * was configured.
+				 */
+				handler = cxl_ops->psl_interrupt;
+			else
+				handler = cxl_irq_afu;
+			cxl_map_irq(ctx->afu->adapter, hwirq, handler, ctx,
+				irq_name->name);
 			irq_name = list_next_entry(irq_name, list);
 		}
 	}
@@ -311,7 +361,7 @@ void afu_release_irqs(struct cxl_context *ctx, void *cookie)
 	unsigned int virq;
 	int r, i;
 
-	for (r = 1; r < CXL_IRQ_RANGES; r++) {
+	for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) {
 		hwirq = ctx->irqs.offset[r];
 		for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) {
 			virq = irq_find_mapping(NULL, hwirq);
-- 
1.9.1