[PATCH 3/3] powerpc/corenet: add support for the kmcent2 board

[Joakim Tjernlund]

On Thu, 2016-12-15 at 14:22 +0100, Valentin Longchamp wrote:
> This board is built around Freescale's T1040 SoC.
> 
> The peripherals used by this design are:
> - DDR3 RAM with SPD support
> - parallel NOR Flash as boot medium
> - 1 PCIe bus (PCIe1 x1)
> - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
> - 4 IFC bus devices:
>   - NOR flash
>   - NAND flash
>   - QRIO reset/power mgmt CPLD
>   - BFTIC chassis management CPLD
> - 2 I2C buses
> - 1 SPI bus
> - HDLC bus with the QE's UCC1
> - last but not least, the mandatory serial port
> 
> The board can be used with the corenet32_smp_defconfig.
> 
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> ---
>  arch/powerpc/boot/dts/fsl/kmcent2.dts         | 303 ++++++++++++++++++++++++++
>  arch/powerpc/platforms/85xx/corenet_generic.c |   1 +
>  2 files changed, 304 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/kmcent2.dts
> 
> diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts
> new file mode 100644
> index 0000000..47afa43
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts
> @@ -0,0 +1,303 @@
> +/*
> + * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
> + *
> + * (C) Copyright 2016
> + * Valentin Longchamp, Keymile AG, valentin.longchamp at keymile.com
> + *
> + * Copyright 2014 - 2015 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +

[SNIP]

> +
> +		ucc_hdlc: ucc at 2000 {
> +			device_type = "hdlc";
> +			compatible = "fsl,ucc-hdlc";
> +			rx-clock-name = "clk9";
> +			tx-clock-name = "clk9";

Should it be clk9 on both tx and rx clock?

 Jocke