[PATCH v1 00/23] ata: sata_dwc_460ex: make it working again

Sun Apr 24 05:41:26 AEST 2016

On Saturday, April 23, 2016 11:44:09 AM Julian Margetson wrote:
> On 4/23/2016 8:02 AM, Julian Margetson wrote:
> > On 4/22/2016 7:06 AM, Christian Lamparter wrote:
> >> On Friday, April 22, 2016 06:50:44 AM Julian Margetson wrote:
> >>> On 4/21/2016 4:25 PM, Christian Lamparter wrote:
> >>>> On Thursday, April 21, 2016 09:15:21 PM Andy Shevchenko wrote:
> >>>>> The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: 
> >>>>> move to generic
> >>>>> DMA driver") to switch to generic DMA engine API wasn't tested on 
> >>>>> bare metal.
> >>>>> Besides that we expecting new board support coming with the same 
> >>>>> SATA IP but
> >>>>> with different DMA.
> >>>>>
> >>>>> The driver has been tested myself on Sam460ex and WD MyBookLive 
> >>>>> (apollo3g)
> >>>>> boards. In any case I ask Christian, Måns, and Julian to 
> >>>>> independently test and
> >>>>> provide Tested-by tag or error report.
> >>>> I did a test run on my WD MyBook Live. I applied all the patches in
> >>>> this series on top of the topic/dw branch of Vinod Koul:
> >>>> <https://git.kernel.org/cgit/linux/kernel/git/vkoul/slave-dma.git/>
> >>>>
> >>>> Tested-by: Christian Lamparter<chunkeey at googlemail.com>
> >>>> ---
> >>>> results for my old ST3808110AS HDD. filesystem is ext4.
> >>>>
> >>>> # hdparm -t /dev/sda
> >>>>
> >>>> /dev/sda:
> >>>>    Timing buffered disk reads: 204 MB in  3.02 seconds = 67.51 MB/sec
> >>>>
> >>>> # bonnie++ -u mbl
> >>>> Using uid:1000, gid:1000.
> >>>> Writing a byte at a time...done
> >>>> Writing intelligently...done
> >>>> Rewriting...done
> >>>> Reading a byte at a time...done
> >>>> Reading intelligently...done
> >>>> start 'em...done...done...done...done...done...
> >>>> Create files in sequential order...done.
> >>>> Stat files in sequential order...done.
> >>>> Delete files in sequential order...done.
> >>>> Create files in random order...done.
> >>>> Stat files in random order...done.
> >>>> Delete files in random order...done.
> >>>> Version  1.97       ------Sequential Output------ --Sequential 
> >>>> Input- --Random-
> >>>> Concurrency   1     -Per Chr- --Block-- -Rewrite- -Per Chr- 
> >>>> --Block-- --Seeks--
> >>>> Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec 
> >>>> %CP  /sec %CP
> >>>> mbl            496M    98  99 26011  21 17589  20   538  99 80138  
> >>>> 39 208.9   8
> >>>> Latency             95267us    1409ms     295ms   26947us 9644us    
> >>>> 1787ms
> >>>> Version  1.97       ------Sequential Create------ --------Random 
> >>>> Create--------
> >>>> mbl                 -Create-- --Read--- -Delete-- -Create-- 
> >>>> --Read--- -Delete--
> >>>>                 files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec 
> >>>> %CP  /sec %CP
> >>>>                    16  6959  78 +++++ +++  5197  40  7250 79 +++++ 
> >>>> +++  4718  37
> >>>> Latency               149ms    6742us     212ms 177ms     767us     
> >>>> 217ms
> >>>> 1.97,1.97,mbl,1,1461269771,496M,,98,99,26011,21,17589,20,538,99,80138,39,208.9,8,16,,,,,6959,78,+++++,+++,5197,40,7250,79,+++++,+++,4718,37,95267us,1409ms,295ms,26947us,9644us,1787ms,149ms,6742us,212ms,177ms,767us,217ms 
> >>>>
> >>>>
> >>> Again on copy partitions .
> >> Ok, here's the copy from my mail off-list.
> >>
> >> Well, a unrelated driver "m41t80" caused a crash:
> >> [   12.912739] Oops: Kernel access of bad area, sig: 11 [#3]
> >> [   12.912743] PREEMPT Canyonlands
> >> [   12.912753] CPU: 0 PID: 1413 Comm: irq/45-m41t80 Tainted: G      
> >> D         4.6.0-rc4-next-20160421-sam460ex-jm #1
> >> [   12.912757] task: ea9834e0 ti: eea6c000 task.ti: eea6c000
> >> [   12.912760] NIP: c0224480 LR: c0023494 CTR: c0042508
> >> [   12.912764] REGS: eea6daf0 TRAP: 0300   Tainted: G D          
> >> (4.6.0-rc4-next-20160421-sam460ex-jm)
> >> [   12.912774] MSR: 00029000 <CE,EE,ME>  CR: 24008282 XER: 00000000
> >> [   12.912825] DEAR: 00000008 ESR: 00000000
> >> [...]
> >> [   12.912927] --- interrupt: 300 at mutex_lock+0x0/0x1c
> >> [   12.912927]     LR = m41t80_handle_irq+0x28/0xac
> >> [   12.912932] [eea6de40] [00000000]   (null) (unreliable)
> >> [   12.912938] [eea6de60] [c004ffac] irq_thread_fn+0x2c/0x48
> >> [   12.912944] [eea6de80] [c00501cc] irq_thread+0xc4/0x160
> >> [   12.912951] [eea6ded0] [c003a3f8] kthread+0xc8/0xcc
> >> [   12.912957] [eea6df40] [c000aee8] ret_from_kernel_thread+0x5c/0x64
> >> [   12.912960] Instruction dump:
> >> [   12.912974] 80010014 7fc3f378 bbc10008 7c0803a6 38210010 4be24ca8 
> >> 9421ffd0 7c0802a6
> >> [   12.912987] bf210014 90010034 3b4302d8 812302ec <83890008> 
> >> 812302d8 7f9a4840 419e011c
> >> [   12.912995] Fixing recursive fault but reboot is needed!
> >>                   ^^^ "reboot is needed!"
> >>
> >> Another thing that came to my mind: Have you checked if your hard drive
> >> and the cables are ok? Are there any pending sectors or suspicious smart
> >> values? Has the drive passed the extended offline test?
> >>   Otherwise, I can't reproduce the error with my MyBook system. I've 
> >> tested
> >> your kernel and it worked on the device without crashing. (I 
> >> copied/dd'ed
> >> 80GB from and back to the hard-drive. It was long and boring, but I 
> >> didn't
> >> encounter any issues and the crc32 matched).
> >>
> >> Sorry, but I can't help you if I can't reproduce it... And short of 
> >> sending
> >> your box to test, I see no efficient way to debug it. However, what I 
> >> can
> >> do, if you are interested: I have a few "build your own" My Book Live 
> >> kits.
> >> It just needs a 3.5" hard-drive and 12v power adapter. If you are 
> >> interested
> >> PM me off-list, this way you can verify that the kernels you build do 
> >> work,
> >> just in case this error is due to a hardware issue (zapped controller,
> >> bad ram/drive/cable?) with your sam460ex box.
> >>
> >> Regards,
> >> Christian
> >>
> >>
> > My Hardware seems ok.
> > I have swapped cables and drives between the SII3512 pci controller 
> > and the DWC controller.
> > No issues when connected to the SII3512 pci controller .
> > The DWC controller works ok under AmigaOS 4.1FE so that does not 
> > appear to be a problem.
> >
> > Regards
> > Julian
> >
> >
> >
> >
> >
> >
> Test with kernel compiled with no other sata controllers included.
> Freshly formatted harddrive  with one ntfs partition. MS-DOs partition 
> table.
> Booted from USB thumb drive.
> Keyboard and mouse freeze as soon as gparted is run.
> 

Well, then. Have you checked for any errata for the sam460ex?
There's a known errata for the 460EX, with the CPU lockup upon
high AHB traffic:
<http://lists.denx.de/pipermail/u-boot/2008-June/036078.html> 

"This patch implements a fix provided by AMCC so that the lockup upon
simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
anymore:..."

This should be fixed by u-boot. However, there's no telling if
there's more to this workaround in the dma engine. You could try
to do the testing without anything connected to the USB ports 
and disable/remove all usb hcds modules. As for fixing this:
I did a quick search but couldn't find any public information. 
There's always support at apm.com (contact them!), or maybe someone
from the Amiga community knows more?