[PATCH v1 00/23] ata: sata_dwc_460ex: make it working again
Julian Margetson
runaway at candw.ms
Sun Apr 24 01:44:09 AEST 2016
On 4/23/2016 8:02 AM, Julian Margetson wrote:
> On 4/22/2016 7:06 AM, Christian Lamparter wrote:
>> On Friday, April 22, 2016 06:50:44 AM Julian Margetson wrote:
>>> On 4/21/2016 4:25 PM, Christian Lamparter wrote:
>>>> On Thursday, April 21, 2016 09:15:21 PM Andy Shevchenko wrote:
>>>>> The last approach in the commit 8b3444852a2b ("sata_dwc_460ex:
>>>>> move to generic
>>>>> DMA driver") to switch to generic DMA engine API wasn't tested on
>>>>> bare metal.
>>>>> Besides that we expecting new board support coming with the same
>>>>> SATA IP but
>>>>> with different DMA.
>>>>>
>>>>> The driver has been tested myself on Sam460ex and WD MyBookLive
>>>>> (apollo3g)
>>>>> boards. In any case I ask Christian, Måns, and Julian to
>>>>> independently test and
>>>>> provide Tested-by tag or error report.
>>>> I did a test run on my WD MyBook Live. I applied all the patches in
>>>> this series on top of the topic/dw branch of Vinod Koul:
>>>> <https://git.kernel.org/cgit/linux/kernel/git/vkoul/slave-dma.git/>
>>>>
>>>> Tested-by: Christian Lamparter<chunkeey at googlemail.com>
>>>> ---
>>>> results for my old ST3808110AS HDD. filesystem is ext4.
>>>>
>>>> # hdparm -t /dev/sda
>>>>
>>>> /dev/sda:
>>>> Timing buffered disk reads: 204 MB in 3.02 seconds = 67.51 MB/sec
>>>>
>>>> # bonnie++ -u mbl
>>>> Using uid:1000, gid:1000.
>>>> Writing a byte at a time...done
>>>> Writing intelligently...done
>>>> Rewriting...done
>>>> Reading a byte at a time...done
>>>> Reading intelligently...done
>>>> start 'em...done...done...done...done...done...
>>>> Create files in sequential order...done.
>>>> Stat files in sequential order...done.
>>>> Delete files in sequential order...done.
>>>> Create files in random order...done.
>>>> Stat files in random order...done.
>>>> Delete files in random order...done.
>>>> Version 1.97 ------Sequential Output------ --Sequential
>>>> Input- --Random-
>>>> Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr-
>>>> --Block-- --Seeks--
>>>> Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec
>>>> %CP /sec %CP
>>>> mbl 496M 98 99 26011 21 17589 20 538 99 80138
>>>> 39 208.9 8
>>>> Latency 95267us 1409ms 295ms 26947us 9644us
>>>> 1787ms
>>>> Version 1.97 ------Sequential Create------ --------Random
>>>> Create--------
>>>> mbl -Create-- --Read--- -Delete-- -Create--
>>>> --Read--- -Delete--
>>>> files /sec %CP /sec %CP /sec %CP /sec %CP /sec
>>>> %CP /sec %CP
>>>> 16 6959 78 +++++ +++ 5197 40 7250 79 +++++
>>>> +++ 4718 37
>>>> Latency 149ms 6742us 212ms 177ms 767us
>>>> 217ms
>>>> 1.97,1.97,mbl,1,1461269771,496M,,98,99,26011,21,17589,20,538,99,80138,39,208.9,8,16,,,,,6959,78,+++++,+++,5197,40,7250,79,+++++,+++,4718,37,95267us,1409ms,295ms,26947us,9644us,1787ms,149ms,6742us,212ms,177ms,767us,217ms
>>>>
>>>>
>>> Again on copy partitions .
>> Ok, here's the copy from my mail off-list.
>>
>> Well, a unrelated driver "m41t80" caused a crash:
>> [ 12.912739] Oops: Kernel access of bad area, sig: 11 [#3]
>> [ 12.912743] PREEMPT Canyonlands
>> [ 12.912753] CPU: 0 PID: 1413 Comm: irq/45-m41t80 Tainted: G
>> D 4.6.0-rc4-next-20160421-sam460ex-jm #1
>> [ 12.912757] task: ea9834e0 ti: eea6c000 task.ti: eea6c000
>> [ 12.912760] NIP: c0224480 LR: c0023494 CTR: c0042508
>> [ 12.912764] REGS: eea6daf0 TRAP: 0300 Tainted: G D
>> (4.6.0-rc4-next-20160421-sam460ex-jm)
>> [ 12.912774] MSR: 00029000 <CE,EE,ME> CR: 24008282 XER: 00000000
>> [ 12.912825] DEAR: 00000008 ESR: 00000000
>> [...]
>> [ 12.912927] --- interrupt: 300 at mutex_lock+0x0/0x1c
>> [ 12.912927] LR = m41t80_handle_irq+0x28/0xac
>> [ 12.912932] [eea6de40] [00000000] (null) (unreliable)
>> [ 12.912938] [eea6de60] [c004ffac] irq_thread_fn+0x2c/0x48
>> [ 12.912944] [eea6de80] [c00501cc] irq_thread+0xc4/0x160
>> [ 12.912951] [eea6ded0] [c003a3f8] kthread+0xc8/0xcc
>> [ 12.912957] [eea6df40] [c000aee8] ret_from_kernel_thread+0x5c/0x64
>> [ 12.912960] Instruction dump:
>> [ 12.912974] 80010014 7fc3f378 bbc10008 7c0803a6 38210010 4be24ca8
>> 9421ffd0 7c0802a6
>> [ 12.912987] bf210014 90010034 3b4302d8 812302ec <83890008>
>> 812302d8 7f9a4840 419e011c
>> [ 12.912995] Fixing recursive fault but reboot is needed!
>> ^^^ "reboot is needed!"
>>
>> Another thing that came to my mind: Have you checked if your hard drive
>> and the cables are ok? Are there any pending sectors or suspicious smart
>> values? Has the drive passed the extended offline test?
>> Otherwise, I can't reproduce the error with my MyBook system. I've
>> tested
>> your kernel and it worked on the device without crashing. (I
>> copied/dd'ed
>> 80GB from and back to the hard-drive. It was long and boring, but I
>> didn't
>> encounter any issues and the crc32 matched).
>>
>> Sorry, but I can't help you if I can't reproduce it... And short of
>> sending
>> your box to test, I see no efficient way to debug it. However, what I
>> can
>> do, if you are interested: I have a few "build your own" My Book Live
>> kits.
>> It just needs a 3.5" hard-drive and 12v power adapter. If you are
>> interested
>> PM me off-list, this way you can verify that the kernels you build do
>> work,
>> just in case this error is due to a hardware issue (zapped controller,
>> bad ram/drive/cable?) with your sam460ex box.
>>
>> Regards,
>> Christian
>>
>>
> My Hardware seems ok.
> I have swapped cables and drives between the SII3512 pci controller
> and the DWC controller.
> No issues when connected to the SII3512 pci controller .
> The DWC controller works ok under AmigaOS 4.1FE so that does not
> appear to be a problem.
>
> Regards
> Julian
>
>
>
>
>
>
Test with kernel compiled with no other sata controllers included.
Freshly formatted harddrive with one ntfs partition. MS-DOs partition
table.
Booted from USB thumb drive.
Keyboard and mouse freeze as soon as gparted is run.
-------------- next part --------------
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Linux version 4.6.0-rc4-next-20160421-sam460ex-jm (root at julian-VirtualBox) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #2 PREEMPT Sat Apr 23 09:26:44 AST 2016
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial at ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=11059200, speed=0
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial at ef600400
[ 0.000000] mem=4ef600400, taddr=4ef600400, irq=0, clk=11059200, speed=0
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0b7d1d4, node_mem_map eefed000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sdb2 rootdelay=10 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2001648K/2097152K available (7424K kernel code, 316K rwdata, 3816K rodata, 240K init, 370K bss, 95504K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 1155.000010 MHz
[ 0.000000] time_init: processor frequency = 1155.000010 MHz
[ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000035] clockevent: decrementer mult[93d70a53] shift[31] cpu[0]
[ 0.000149] Console: colour dummy device 80x25
[ 0.000701] console [tty0] enabled
[ 0.000735] pid_max: default: 32768 minimum: 301
[ 0.000846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003501] devtmpfs: initialized
[ 0.006153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006544] xor: measuring software checksum speed
[ 0.016612] 8regs : 896.000 MB/sec
[ 0.026438] 8regs_prefetch: 800.000 MB/sec
[ 0.036484] 32regs : 1232.000 MB/sec
[ 0.046564] 32regs_prefetch: 1084.000 MB/sec
[ 0.046599] xor: using function: 32regs (1232.000 MB/sec)
[ 0.046626] prandom: seed boundary self test passed
[ 0.048680] prandom: 100 self tests passed
[ 0.049389] NET: Registered protocol family 16
[ 0.054839] cpuidle: using governor ladder
[ 0.056802] cpuidle: using governor menu
[ 0.057205] 256k L2-cache enabled
[ 0.057287] PCIE0: Port disabled via device-tree
[ 0.057347] PCIE1: Checking link...
[ 0.057364] PCIE1: Device detected, waiting for link...
[ 0.057383] PCIE1: link is up !
[ 0.159657] PCI host bridge /plb/pciex at d20000000 (primary) ranges:
[ 0.159707] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.159744] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.159775] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.159812] 4xx PCI DMA offset set to 0x00000000
[ 0.159829] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159848] DMA window size 0x0000000080000000
[ 0.159884] PCIE1: successfully set as root-complex
[ 0.159977] PCI host bridge /plb/pci at c0ec00000 (primary) ranges:
[ 0.160006] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.160041] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.160072] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.160102] 4xx PCI DMA offset set to 0x00000000
[ 0.160119] 4xx PCI DMA window base to 0x0000000000000000
[ 0.160138] DMA window size 0x0000000080000000
[ 0.169685] PCI: Probing PCI hardware
[ 0.170005] PCI host bridge to bus 0000:80
[ 0.170043] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.170079] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.170117] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.170155] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.170181] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to ff
[ 0.170221] pci 0000:80:00.0: [aaa1:bed1] type 01 class 0x060400
[ 0.170249] pci 0000:80:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
[ 0.170281] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.170749] pci 0000:81:00.0: [1002:683f] type 00 class 0x030000
[ 0.170784] pci 0000:81:00.0: reg 0x10: [mem 0xea0000000-0xeafffffff 64bit pref]
[ 0.170804] pci 0000:81:00.0: reg 0x18: [mem 0xeb0000000-0xeb003ffff 64bit]
[ 0.170820] pci 0000:81:00.0: reg 0x20: [io 0xfffe2000-0xfffe20ff]
[ 0.170843] pci 0000:81:00.0: reg 0x30: [mem 0xf00100000-0xf0011ffff pref]
[ 0.170925] pci 0000:81:00.0: supports D1 D2
[ 0.170935] pci 0000:81:00.0: PME# supported from D1 D2 D3hot
[ 0.171122] pci 0000:81:00.1: [1002:aab0] type 00 class 0x040300
[ 0.171153] pci 0000:81:00.1: reg 0x10: [mem 0xf00100000-0xf00103fff 64bit]
[ 0.171255] pci 0000:81:00.1: supports D1 D2
[ 0.171448] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.171488] pci 0000:80:00.0: bridge window [io 0xfffe2000-0xfffe2fff]
[ 0.171500] pci 0000:80:00.0: bridge window [mem 0xea0000000-0xeb00fffff]
[ 0.171593] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to bf
[ 0.171759] PCI host bridge to bus 0001:00
[ 0.171792] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.171818] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.171855] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.171893] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.171917] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.171946] pci 0001:00:04.0: [1095:3512] type 00 class 0x010400
[ 0.171967] pci 0001:00:04.0: reg 0x10: [io 0x1000-0x1007]
[ 0.171980] pci 0001:00:04.0: reg 0x14: [io 0x1008-0x100b]
[ 0.171992] pci 0001:00:04.0: reg 0x18: [io 0x1010-0x1017]
[ 0.172005] pci 0001:00:04.0: reg 0x1c: [io 0x1018-0x101b]
[ 0.172017] pci 0001:00:04.0: reg 0x20: [io 0x1020-0x102f]
[ 0.172030] pci 0001:00:04.0: reg 0x24: [mem 0xd80000000-0xd800001ff]
[ 0.172043] pci 0001:00:04.0: reg 0x30: [mem 0xc0ee00000-0xc0ee7ffff pref]
[ 0.172073] pci 0001:00:04.0: supports D1 D2
[ 0.172254] pci 0001:00:06.0: [126f:0501] type 00 class 0x038000
[ 0.172275] pci 0001:00:06.0: reg 0x10: [mem 0xd84000000-0xd87ffffff]
[ 0.172287] pci 0001:00:06.0: reg 0x14: [mem 0xd88000000-0xd881fffff]
[ 0.172329] pci 0001:00:06.0: supports D1 D2
[ 0.172566] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.172664] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172709] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.172736] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.172767] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172809] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.172848] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.172882] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.172920] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.172948] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.172971] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.172997] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.173023] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.173057] pci_bus 0000:80: resource 4 [io 0xfffe0000-0xfffeffff]
[ 0.173067] pci_bus 0000:80: resource 5 [mem 0xe80000000-0xeffffffff]
[ 0.173076] pci_bus 0000:80: resource 6 [mem 0xf00100000-0xf001fffff]
[ 0.173086] pci_bus 0000:81: resource 0 [io 0xfffe1000-0xfffe1fff]
[ 0.173095] pci_bus 0000:81: resource 1 [mem 0xe90000000-0xe900fffff]
[ 0.173105] pci_bus 0000:81: resource 2 [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.173120] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.173148] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.173175] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.173207] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.173234] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.173259] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.173284] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.173310] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.173335] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.173361] pci_bus 0001:00: resource 4 [io 0x0000-0xffff]
[ 0.173803] pci_bus 0001:00: resource 5 [mem 0xd80000000-0xdffffffff]
[ 0.173812] pci_bus 0001:00: resource 6 [mem 0xc0ee00000-0xc0eefffff]
[ 0.237400] raid6: int32x1 gen() 300 MB/s
[ 0.254364] raid6: int32x1 xor() 162 MB/s
[ 0.271495] raid6: int32x2 gen() 390 MB/s
[ 0.288548] raid6: int32x2 xor() 236 MB/s
[ 0.305718] raid6: int32x4 gen() 437 MB/s
[ 0.322740] raid6: int32x4 xor() 255 MB/s
[ 0.339907] raid6: int32x8 gen() 277 MB/s
[ 0.356885] raid6: int32x8 xor() 205 MB/s
[ 0.356910] raid6: using algorithm int32x4 gen() 437 MB/s
[ 0.356928] raid6: .... xor() 255 MB/s, rmw enabled
[ 0.356947] raid6: using intx1 recovery algorithm
[ 0.357451] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.357496] vgaarb: loaded
[ 0.357511] vgaarb: bridge control possible 0000:81:00.0
[ 0.357969] SCSI subsystem initialized
[ 0.358521] libata version 3.00 loaded.
[ 0.359092] usbcore: registered new interface driver usbfs
[ 0.359222] usbcore: registered new interface driver hub
[ 0.359350] usbcore: registered new device driver usb
[ 0.359671] pps_core: LinuxPPS API ver. 1 registered
[ 0.359701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.359797] PTP clock support registered
[ 0.360777] EDAC MC: Ver: 3.0.0
[ 0.361939] Advanced Linux Sound Architecture Driver Initialized.
[ 0.363172] clocksource: Switched to clocksource timebase
[ 0.363408] FS-Cache: Loaded
[ 0.363625] CacheFiles: Loaded
[ 0.379929] NET: Registered protocol family 2
[ 0.380588] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.380719] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.381043] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.381786] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.381896] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.382328] NET: Registered protocol family 1
[ 0.382592] RPC: Registered named UNIX socket transport module.
[ 0.382624] RPC: Registered udp transport module.
[ 0.382641] RPC: Registered tcp transport module.
[ 0.382659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.382727] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.383594] Could not remap bcsr
[ 0.389981] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.392859] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.393465] workingset: timestamp_bits=28 max_order=19 bucket_order=0
[ 0.413718] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.414344] fuse init (API version 7.24)
[ 0.419421] async_tx: api initialized (async)
[ 0.419516] bounce: pool size: 64 pages
[ 0.419608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.419641] io scheduler noop registered
[ 0.419807] io scheduler cfq registered (default)
[ 0.422164] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.422269] crc32: self tests passed, processed 225944 bytes in 989276 nsec
[ 0.423439] crc32c: CRC_LE_BITS = 64
[ 0.423465] crc32c: self tests passed, processed 225944 bytes in 494887 nsec
[ 0.492728] crc32_combine: 8373 self tests passed
[ 0.562174] crc32c_combine: 8373 self tests passed
[ 0.562226] glob: 64 self-tests passed, 0 failed
[ 0.661395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.662544] console [ttyS0] disabled
[ 0.683750] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.620899] console [ttyS0] enabled
[ 1.645418] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.655614] console [ttyS0] disabled
[ 1.659530] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 2.621341] console [ttyS0] enabled
[ 2.625747] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 2.635484] Generic non-volatile memory driver v1.1
[ 2.640973] [drm] Initialized drm 1.1.0 20060810
[ 2.645924] [drm] radeon kernel modesetting enabled.
[ 2.652014] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 2.660241] [drm] register mmio base: 0xe90000000
[ 2.665009] [drm] register mmio size: 262144
[ 3.001253] ATOM BIOS: C44501
[ 3.004549] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.013476] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 3.021168] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.026065] [drm] RAM width 128bits DDR
[ 3.030094] [TTM] Zone kernel: Available graphics memory: 378440 kiB
[ 3.036585] [TTM] Zone highmem: Available graphics memory: 1033800 kiB
[ 3.043142] [TTM] Initializing pool allocator
[ 3.047545] [TTM] Initializing DMA pool allocator
[ 3.052369] [drm] radeon: 1024M of VRAM memory ready
[ 3.057378] [drm] radeon: 2048M of GTT memory ready.
[ 3.062408] [drm] Loading verde Microcode
[ 3.066469] [drm] Internal thermal controller with fan control
[ 3.072623] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.121797] [drm] radeon: dpm initialized
[ 3.128222] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 3.134469] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.151139] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.210767] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[ 3.218077] radeon 0000:81:00.0: WB enabled
[ 3.222320] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xee962c00
[ 3.232441] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xee962c04
[ 3.242562] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xee962c08
[ 3.252683] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xee962c0c
[ 3.262805] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xee962c10
[ 3.304324] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.341458] radeon 0000:81:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xee962c18
[ 3.351618] radeon 0000:81:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xee962c1c
[ 3.361759] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.368404] [drm] Driver supports precise vblank timestamp query.
[ 3.374523] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.380446] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.388716] radeon 0000:81:00.0: radeon: using MSI.
[ 3.393673] [drm] radeon: irq initialized.
[ 4.152902] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 4.161744] radeon 0000:81:00.0: disabling GPU acceleration
[ 4.370696] [drm] Radeon Display Connectors
[ 4.375369] [drm] Connector 0:
[ 4.378506] [drm] HDMI-A-1
[ 4.381460] [drm] HPD4
[ 4.384046] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.391495] [drm] Encoders:
[ 4.394493] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.398783] [drm] Connector 1:
[ 4.401854] [drm] DVI-I-1
[ 4.404666] [drm] HPD2
[ 4.407221] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.414647] [drm] Encoders:
[ 4.417635] [drm] DFP2: INTERNAL_UNIPHY
[ 4.421836] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.540136] [drm] fb mappable at 0x806E9000
[ 4.544354] [drm] vram apper at 0x80000000
[ 4.548468] [drm] size 8294400
[ 4.551541] [drm] fb depth is 24
[ 4.554786] [drm] pitch is 7680
[ 4.850224] Console: switching to colour frame buffer device 240x67
[ 4.929533] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 4.939239] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 4.947588] [drm] amdgpu kernel modesetting enabled.
[ 4.967357] brd: module loaded
[ 4.977422] loop: module loaded
[ 4.981255] sm501 0001:00:06.0: enabling device (0004 -> 0006)
[ 4.987695] sm501 0001:00:06.0: incorrect device id c0000105
[ 4.994354] sata-dwc 4bffd1000.sata: id 0, controller version 1.82
[ 5.001301] sata-dwc 4bffd1000.sata: DW_PARAMS: 0x10800804
[ 5.001354] sata-dwc 4bffd1000.sata: DWC_PARAMS[0]: 0x49230b1b
[ 5.001510] sata-dwc 4bffd1000.sata: DesignWare DMA Controller, 1 channels
[ 5.008925] dma dma0chan0: dwc_alloc_chan_resources
[ 5.008936] dmaengine: __dma_request_channel: success (dma0chan0)
[ 5.009740] scsi host0: sata-dwc
[ 5.013516] ata1: SATA max UDMA/133 irq 36
[ 5.018829] libphy: Fixed MDIO Bus: probed
[ 5.023585] PPC 4xx OCP EMAC driver, version 3.54
[ 5.029015] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 5.035369] ZMII /plb/opb/emac-zmii at ef600d00 initialized
[ 5.041307] RGMII /plb/opb/emac-rgmii at ef601500 initialized with MDIO support
[ 5.049042] TAH /plb/opb/emac-tah at ef601350 initialized
[ 5.054638] TAH /plb/opb/emac-tah at ef601450 initialized
[ 5.060481] /plb/opb/emac-rgmii at ef601500: input 0 in RGMII mode
[ 5.068225] eth0: EMAC-0 /plb/opb/ethernet at ef600e00, MAC 00:50:c2:80:d5:c5
[ 5.075645] eth0: found Generic MII PHY (0x00)
[ 5.080589] /plb/opb/emac-rgmii at ef601500: input 1 in RGMII mode
[ 5.088248] eth1: EMAC-1 /plb/opb/ethernet at ef600f00, MAC 00:00:00:00:00:00
[ 5.095666] eth1: found Generic MII PHY (0x01)
[ 5.100514] PPP generic driver version 2.4.2
[ 5.105449] PPP BSD Compression module registered
[ 5.110580] PPP Deflate Compression module registered
[ 5.115965] NET: Registered protocol family 24
[ 5.121025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.128292] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 5.133410] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 5.142777] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 5.155181] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 5.161907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.169109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.176757] usb usb1: Product: OF EHCI
[ 5.180742] usb usb1: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ehci_hcd
[ 5.203447] usb usb1: SerialNumber: PPC-OF USB
[ 5.222965] hub 1-0:1.0: USB hub found
[ 5.241218] hub 1-0:1.0: 1 port detected
[ 5.259745] ehci-pci: EHCI PCI platform driver
[ 5.278695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.299590] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 5.318905] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 5.341508] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.363024] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 5.384045] ata1.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 5.384052] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32)
[ 5.428344] ata1.00: configured for UDMA/133
[ 5.448212] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 5.477976] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 5.501310] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.523111] sd 0:0:0:0: [sda] Write Protect is off
[ 5.547251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.547368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.596183] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 5.622029] dma dma0chan0: dwc_prep_slave_sg
[ 5.626726] dma dma0chan0: dwc_tx_submit: queued 2
[ 5.626732] dma dma0chan0: dwc_dostart_first_queued: started 2
[ 5.626820] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 5.626830] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 5.626837] dma dma0chan0: descriptor 2 complete
[ 5.626927] sda: sda1
[ 5.627999] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.838612] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 5.882178] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.933330] hub 1-1:1.0: USB hub found
[ 5.975180] hub 1-1:1.0: 7 ports detected
[ 6.225870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.249419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.273268] usb usb2: Product: OF OHCI
[ 6.293418] usb usb2: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ohci_hcd
[ 6.318084] usb usb2: SerialNumber: PPC-OF USB
[ 6.339924] hub 2-0:1.0: USB hub found
[ 6.360481] hub 2-0:1.0: 1 port detected
[ 6.381592] ohci-pci: OHCI PCI platform driver
[ 6.402587] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 6.427392] usbcore: registered new interface driver usblp
[ 6.450043] usbcore: registered new interface driver usb-storage
[ 6.473043] usbcore: registered new interface driver usbserial
[ 6.495723] usbcore: registered new interface driver usbserial_generic
[ 6.518937] usbserial: USB Serial support registered for generic
[ 6.542275] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 6.565758] mousedev: PS/2 mouse device common for all mice
[ 6.565764] i2c /dev entries driver
[ 6.567794] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 6.568137] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 6.568293] md: linear personality registered for level -1
[ 6.568297] md: raid0 personality registered for level 0
[ 6.568300] md: raid1 personality registered for level 1
[ 6.568304] md: raid10 personality registered for level 10
[ 6.569330] md: raid6 personality registered for level 6
[ 6.569334] md: raid5 personality registered for level 5
[ 6.569337] md: raid4 personality registered for level 4
[ 6.569986] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[ 6.569990] EDAC PPC4xx MC: v1.0.0
[ 6.569993] EDAC PPC4xx MC: Reporting type: interrupt
[ 6.570655] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.572018] usbcore: registered new interface driver usbhid
[ 6.572020] usbhid: USB HID core driver
[ 6.577720] no UART detected at 0x1
[ 6.578465] usbcore: registered new interface driver snd-usb-audio
[ 6.578575] usbcore: registered new interface driver snd-ua101
[ 6.578688] usbcore: registered new interface driver snd-usb-usx2y
[ 6.578860] ipip: IPv4 over IPv4 tunneling driver
[ 6.580413] Initializing XFRM netlink socket
[ 6.581574] NET: Registered protocol family 10
[ 6.583379] sit: IPv6 over IPv4 tunneling driver
[ 6.583983] NET: Registered protocol family 17
[ 6.584005] NET: Registered protocol family 15
[ 6.584320] Running MSI bitmap self-tests ...
[ 6.608677] Key type encrypted registered
[ 6.609065] hctosys: unable to open rtc device (rtc0)
[ 6.609308] ALSA device list:
[ 6.609313] #0: Virtual MIDI Card 1
[ 7.221603] Waiting 10 sec before mounting root device...
[ 7.241416] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.241422] usb 1-1.1: Product: USB 2.0 Hub
[ 7.242101] hub 1-1.1:1.0: USB hub found
[ 7.242288] hub 1-1.1:1.0: 4 ports detected
[ 7.392187] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 7.507149] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 7.528211] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.549647] usb 1-1.2: Product: USB Keyboard
[ 7.567750] usb 1-1.2: Manufacturer: CHICONY
[ 7.592794] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 7.671196] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 7.693808] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 7.807400] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 7.829724] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.852641] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 7.897543] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 7.927721] usb 1-1.5: new high-speed USB device number 6 using ppc-of-ehci
[ 8.002662] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 8.044261] usb 1-1.5: New USB device found, idVendor=0781, idProduct=5530
[ 8.067927] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.092067] usb 1-1.5: Product: Cruzer
[ 8.112629] usb 1-1.5: Manufacturer: SanDisk
[ 8.133688] usb 1-1.5: SerialNumber: 200517373207B181D66A
[ 8.156601] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[ 8.179893] scsi host1: usb-storage 1-1.5:1.0
[ 8.274190] usb 1-1.6: new full-speed USB device number 7 using ppc-of-ehci
[ 8.386988] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 8.411267] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.435933] usb 1-1.6: Product: USB Receiver
[ 8.457385] usb 1-1.6: Manufacturer: Logitech
[ 8.482586] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 8.565341] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 8.602293] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 8.684721] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 8.721791] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 8.826187] usb 1-1.7: new high-speed USB device number 8 using ppc-of-ehci
[ 8.944715] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 8.971305] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.998342] usb 1-1.7: Product: Ultra Fast Media
[ 9.022891] usb 1-1.7: Manufacturer: Generic
[ 9.047130] usb 1-1.7: SerialNumber: 000000225001
[ 9.072357] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 9.098648] scsi host2: usb-storage 1-1.7:1.0
[ 9.204422] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5
[ 9.233951] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.260307] sd 1:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.289710] sd 1:0:0:0: [sdb] Write Protect is off
[ 9.314656] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 9.315711] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.355380] sdb: sdb1 sdb2 sdb3
[ 9.383460] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 10.124368] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 10.154723] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 10.182700] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 17.320229] md: Waiting for all devices to be available before autodetect
[ 17.348105] md: If you don't use raid, use raid=noautodetect
[ 17.375599] md: Autodetecting RAID arrays.
[ 17.401015] md: Scanned 0 and added 0 devices.
[ 17.426682] md: autorun ...
[ 17.450558] md: ... autorun DONE.
[ 17.476340] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities
[ 17.506702] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities
[ 17.538521] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 17.566553] EXT4-fs (sdb2): write access will be enabled during recovery
[ 17.605249] EXT4-fs (sdb2): recovery complete
[ 17.632470] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.661659] VFS: Mounted root (ext4 filesystem) readonly on device 8:18.
[ 17.693567] devtmpfs: mounted
[ 17.718490] Freeing unused kernel memory: 240K (c0afe000 - c0b3a000)
[ 17.746442] This architecture does not have kernel memory protection.
[ 18.080931] random: nonblocking pool is initialized
[ 18.334276] systemd[1]: System time before build time, advancing clock.
[ 18.448818] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 18.489620] systemd[1]: Detected architecture ppc.
[ 18.582866] systemd[1]: Set hostname to <Amigaone>.
[ 19.501812] systemd[1]: Listening on udev Kernel Socket.
[ 19.548344] systemd[1]: Reached target User and Group Name Lookups.
[ 19.594553] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 19.641852] systemd[1]: Reached target Swap.
[ 19.686689] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 19.735524] systemd[1]: Listening on Syslog Socket.
[ 19.781577] systemd[1]: Listening on udev Control Socket.
[ 19.828332] systemd[1]: Listening on Journal Socket.
[ 19.873676] systemd[1]: Created slice User and Session Slice.
[ 19.937363] systemd[1]: Reached target Encrypted Volumes.
[ 19.981301] systemd[1]: Listening on Journal Socket (/dev/log).
[ 20.025368] systemd[1]: Created slice System Slice.
[ 20.068157] systemd[1]: Reached target Slices.
[ 20.112770] systemd[1]: Starting Braille Device Support...
[ 20.177269] systemd[1]: Starting Uncomplicated firewall...
[ 20.231055] systemd[1]: Started Read required files in advance.
[ 20.292386] systemd[1]: Mounting POSIX Message Queue File System...
[ 20.354044] systemd[1]: Starting Nameserver information manager...
[ 20.413924] systemd[1]: Mounting Debug File System...
[ 20.478260] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 20.565501] systemd[1]: Starting Load Kernel Modules...
[ 20.638155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.690550] systemd[1]: Reached target Remote File Systems (Pre).
[ 20.737361] systemd[1]: Reached target Remote File Systems.
[ 20.784018] systemd[1]: Created slice system-getty.slice.
[ 20.832715] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 20.898690] systemd[1]: Starting Journal Service...
[ 20.956698] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 21.025068] systemd[1]: Mounted Debug File System.
[ 21.077076] systemd[1]: Mounted POSIX Message Queue File System.
[ 21.140850] systemd[1]: brltty.service: Main process exited, code=exited, status=228/SECCOMP
[ 21.198910] systemd[1]: Failed to start Braille Device Support.
[ 21.336340] systemd[1]: brltty.service: Unit entered failed state.
[ 21.389320] systemd[1]: brltty.service: Failed with result 'exit-code'.
[ 21.447145] systemd[1]: Started Uncomplicated firewall.
[ 21.501906] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 21.540607] systemd[1]: ureadahead.service: Unit entered failed state.
[ 21.566963] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 21.606548] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 21.648031] systemd[1]: Failed to start Load Kernel Modules.
[ 21.714237] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 21.741561] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 21.770592] systemd[1]: Started Create Static Device Nodes in /dev.
[ 21.820444] systemd[1]: Started Nameserver information manager.
[ 21.897271] systemd[1]: Started Journal Service.
[ 22.982817] dma dma0chan0: dwc_prep_slave_sg
[ 23.006266] dma dma0chan0: dwc_tx_submit: queued 3
[ 23.006281] dma dma0chan0: dwc_dostart_first_queued: started 3
[ 23.006358] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.006382] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.006392] dma dma0chan0: descriptor 3 complete
[ 23.009378] dma dma0chan0: dwc_prep_slave_sg
[ 23.009494] dma dma0chan0: dwc_tx_submit: queued 4
[ 23.009506] dma dma0chan0: dwc_dostart_first_queued: started 4
[ 23.009580] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.009595] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.009606] dma dma0chan0: descriptor 4 complete
[ 23.009750] dma dma0chan0: dwc_prep_slave_sg
[ 23.009862] dma dma0chan0: dwc_tx_submit: queued 5
[ 23.009873] dma dma0chan0: dwc_dostart_first_queued: started 5
[ 23.009943] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.009963] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.009974] dma dma0chan0: descriptor 5 complete
[ 23.010099] dma dma0chan0: dwc_prep_slave_sg
[ 23.010208] dma dma0chan0: dwc_tx_submit: queued 6
[ 23.010220] dma dma0chan0: dwc_dostart_first_queued: started 6
[ 23.010292] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.010306] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.010316] dma dma0chan0: descriptor 6 complete
[ 23.010447] dma dma0chan0: dwc_prep_slave_sg
[ 23.010545] dma dma0chan0: dwc_tx_submit: queued 7
[ 23.010556] dma dma0chan0: dwc_dostart_first_queued: started 7
[ 23.010629] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.010649] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.010660] dma dma0chan0: descriptor 7 complete
[ 23.010786] dma dma0chan0: dwc_prep_slave_sg
[ 23.013720] dma dma0chan0: dwc_tx_submit: queued 8
[ 23.013736] dma dma0chan0: dwc_dostart_first_queued: started 8
[ 23.013809] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.013825] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.013836] dma dma0chan0: descriptor 8 complete
[ 23.014095] dma dma0chan0: dwc_prep_slave_sg
[ 23.041520] dma dma0chan0: dwc_tx_submit: queued 9
[ 23.041536] dma dma0chan0: dwc_dostart_first_queued: started 9
[ 23.041608] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.041632] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.041643] dma dma0chan0: descriptor 9 complete
[ 23.041867] dma dma0chan0: dwc_prep_slave_sg
[ 23.041991] dma dma0chan0: dwc_tx_submit: queued 10
[ 23.042002] dma dma0chan0: dwc_dostart_first_queued: started 10
[ 23.042077] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.042091] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.042101] dma dma0chan0: descriptor 10 complete
[ 23.042275] dma dma0chan0: dwc_prep_slave_sg
[ 23.042386] dma dma0chan0: dwc_tx_submit: queued 11
[ 23.042397] dma dma0chan0: dwc_dostart_first_queued: started 11
[ 23.042465] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.042485] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.042496] dma dma0chan0: descriptor 11 complete
[ 23.042614] dma dma0chan0: dwc_prep_slave_sg
[ 23.042725] dma dma0chan0: dwc_tx_submit: queued 12
[ 23.042736] dma dma0chan0: dwc_dostart_first_queued: started 12
[ 23.042804] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.042824] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.042835] dma dma0chan0: descriptor 12 complete
[ 23.043322] dma dma0chan0: dwc_prep_slave_sg
[ 23.043441] dma dma0chan0: dwc_tx_submit: queued 13
[ 23.043452] dma dma0chan0: dwc_dostart_first_queued: started 13
[ 23.043643] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.043667] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.043678] dma dma0chan0: descriptor 13 complete
[ 23.043734] dma dma0chan0: dwc_prep_slave_sg
[ 23.043857] dma dma0chan0: dwc_tx_submit: queued 14
[ 23.043868] dma dma0chan0: dwc_dostart_first_queued: started 14
[ 23.043935] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.043954] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.043965] dma dma0chan0: descriptor 14 complete
[ 23.044016] dma dma0chan0: dwc_prep_slave_sg
[ 23.044314] dma dma0chan0: dwc_tx_submit: queued 15
[ 23.044326] dma dma0chan0: dwc_dostart_first_queued: started 15
[ 23.044738] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.044763] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.044774] dma dma0chan0: descriptor 15 complete
[ 23.044865] dma dma0chan0: dwc_prep_slave_sg
[ 23.045007] dma dma0chan0: dwc_tx_submit: queued 16
[ 23.045017] dma dma0chan0: dwc_dostart_first_queued: started 16
[ 23.046061] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.046093] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.046106] dma dma0chan0: descriptor 16 complete
[ 23.046623] dma dma0chan0: dwc_prep_slave_sg
[ 23.046789] dma dma0chan0: dwc_tx_submit: queued 17
[ 23.046801] dma dma0chan0: dwc_dostart_first_queued: started 17
[ 23.048522] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.048552] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.048564] dma dma0chan0: descriptor 17 complete
[ 23.049649] dma dma0chan0: dwc_prep_slave_sg
[ 23.052774] dma dma0chan0: dwc_tx_submit: queued 18
[ 23.052789] dma dma0chan0: dwc_dostart_first_queued: started 18
[ 23.054612] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.054643] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.054656] dma dma0chan0: descriptor 18 complete
[ 23.055395] dma dma0chan0: dwc_prep_slave_sg
[ 23.055575] dma dma0chan0: dwc_tx_submit: queued 19
[ 23.055587] dma dma0chan0: dwc_dostart_first_queued: started 19
[ 23.057418] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.057448] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.057461] dma dma0chan0: descriptor 19 complete
[ 23.058529] dma dma0chan0: dwc_prep_slave_sg
[ 23.082102] dma dma0chan0: dwc_tx_submit: queued 20
[ 23.082117] dma dma0chan0: dwc_dostart_first_queued: started 20
[ 23.083960] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.083990] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.084002] dma dma0chan0: descriptor 20 complete
[ 23.084715] dma dma0chan0: dwc_prep_slave_sg
[ 23.084911] dma dma0chan0: dwc_tx_submit: queued 21
[ 23.084923] dma dma0chan0: dwc_dostart_first_queued: started 21
[ 23.086942] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.086972] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.086985] dma dma0chan0: descriptor 21 complete
[ 23.088046] dma dma0chan0: dwc_prep_slave_sg
[ 23.088213] dma dma0chan0: dwc_tx_submit: queued 22
[ 23.088225] dma dma0chan0: dwc_dostart_first_queued: started 22
[ 23.089981] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.090011] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.090023] dma dma0chan0: descriptor 22 complete
[ 23.090722] dma dma0chan0: dwc_prep_slave_sg
[ 23.097001] dma dma0chan0: dwc_tx_submit: queued 23
[ 23.097017] dma dma0chan0: dwc_dostart_first_queued: started 23
[ 23.097972] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.098001] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.098013] dma dma0chan0: descriptor 23 complete
[ 23.098123] dma dma0chan0: dwc_prep_slave_sg
[ 23.098232] dma dma0chan0: dwc_tx_submit: queued 24
[ 23.098244] dma dma0chan0: dwc_dostart_first_queued: started 24
[ 23.099070] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.099102] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.099114] dma dma0chan0: descriptor 24 complete
[ 23.099753] dma dma0chan0: dwc_prep_slave_sg
[ 23.099874] dma dma0chan0: dwc_tx_submit: queued 25
[ 23.099886] dma dma0chan0: dwc_dostart_first_queued: started 25
[ 23.099960] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.099975] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.099985] dma dma0chan0: descriptor 25 complete
[ 23.100647] dma dma0chan0: dwc_prep_slave_sg
[ 23.100762] dma dma0chan0: dwc_tx_submit: queued 26
[ 23.100773] dma dma0chan0: dwc_dostart_first_queued: started 26
[ 23.100845] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 23.100866] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 23.100877] dma dma0chan0: descriptor 26 complete
[ 23.261280] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 24.049869] systemd-journald[1576]: Received request to flush runtime journal from PID 1
[ 25.825917] eth0: link is up, 1000 FDX, pause enabled
[ 27.056083] dma dma0chan0: dwc_prep_slave_sg
[ 27.056226] dma dma0chan0: dwc_tx_submit: queued 27
[ 27.056238] dma dma0chan0: dwc_dostart_first_queued: started 27
[ 27.056317] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.056338] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.056350] dma dma0chan0: descriptor 27 complete
[ 27.073867] dma dma0chan0: dwc_prep_slave_sg
[ 27.073992] dma dma0chan0: dwc_tx_submit: queued 28
[ 27.074003] dma dma0chan0: dwc_dostart_first_queued: started 28
[ 27.074082] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.074096] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.074108] dma dma0chan0: descriptor 28 complete
[ 27.087913] dma dma0chan0: dwc_prep_slave_sg
[ 27.088030] dma dma0chan0: dwc_tx_submit: queued 29
[ 27.088042] dma dma0chan0: dwc_dostart_first_queued: started 29
[ 27.088124] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.088146] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.088159] dma dma0chan0: descriptor 29 complete
[ 27.108090] dma dma0chan0: dwc_prep_slave_sg
[ 27.108213] dma dma0chan0: dwc_tx_submit: queued 30
[ 27.108225] dma dma0chan0: dwc_dostart_first_queued: started 30
[ 27.108318] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.108347] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.108358] dma dma0chan0: descriptor 30 complete
[ 27.112720] dma dma0chan0: dwc_prep_slave_sg
[ 27.112841] dma dma0chan0: dwc_tx_submit: queued 31
[ 27.112850] dma dma0chan0: dwc_dostart_first_queued: started 31
[ 27.112940] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.112956] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.112967] dma dma0chan0: descriptor 31 complete
[ 27.113958] dma dma0chan0: dwc_prep_slave_sg
[ 27.114076] dma dma0chan0: dwc_tx_submit: queued 32
[ 27.114088] dma dma0chan0: dwc_dostart_first_queued: started 32
[ 27.114211] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.114284] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.114297] dma dma0chan0: descriptor 32 complete
[ 27.119786] dma dma0chan0: dwc_prep_slave_sg
[ 27.119904] dma dma0chan0: dwc_tx_submit: queued 33
[ 27.119915] dma dma0chan0: dwc_dostart_first_queued: started 33
[ 27.119996] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.120025] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.120038] dma dma0chan0: descriptor 33 complete
[ 27.127435] dma dma0chan0: dwc_prep_slave_sg
[ 27.127553] dma dma0chan0: dwc_tx_submit: queued 34
[ 27.127565] dma dma0chan0: dwc_dostart_first_queued: started 34
[ 27.127644] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.127665] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.127677] dma dma0chan0: descriptor 34 complete
[ 27.138505] dma dma0chan0: dwc_prep_slave_sg
[ 27.138628] dma dma0chan0: dwc_tx_submit: queued 35
[ 27.138639] dma dma0chan0: dwc_dostart_first_queued: started 35
[ 27.138719] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.138741] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.138753] dma dma0chan0: descriptor 35 complete
[ 27.140069] dma dma0chan0: dwc_prep_slave_sg
[ 27.140218] dma dma0chan0: dwc_tx_submit: queued 36
[ 27.140229] dma dma0chan0: dwc_dostart_first_queued: started 36
[ 27.140333] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.140349] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.140360] dma dma0chan0: descriptor 36 complete
[ 27.146559] dma dma0chan0: dwc_prep_slave_sg
[ 27.146676] dma dma0chan0: dwc_tx_submit: queued 37
[ 27.146688] dma dma0chan0: dwc_dostart_first_queued: started 37
[ 27.146794] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.146809] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.146820] dma dma0chan0: descriptor 37 complete
[ 27.151405] dma dma0chan0: dwc_prep_slave_sg
[ 27.151525] dma dma0chan0: dwc_tx_submit: queued 38
[ 27.151537] dma dma0chan0: dwc_dostart_first_queued: started 38
[ 27.151628] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.151643] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.151654] dma dma0chan0: descriptor 38 complete
[ 27.190408] dma dma0chan0: dwc_prep_slave_sg
[ 27.190531] dma dma0chan0: dwc_tx_submit: queued 39
[ 27.190543] dma dma0chan0: dwc_dostart_first_queued: started 39
[ 27.190620] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.190635] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.190646] dma dma0chan0: descriptor 39 complete
[ 27.209370] dma dma0chan0: dwc_prep_slave_sg
[ 27.209493] dma dma0chan0: dwc_tx_submit: queued 40
[ 27.209502] dma dma0chan0: dwc_dostart_first_queued: started 40
[ 27.209587] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.209604] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.209615] dma dma0chan0: descriptor 40 complete
[ 27.223661] dma dma0chan0: dwc_prep_slave_sg
[ 27.223777] dma dma0chan0: dwc_tx_submit: queued 41
[ 27.223790] dma dma0chan0: dwc_dostart_first_queued: started 41
[ 27.223871] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.223885] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.223897] dma dma0chan0: descriptor 41 complete
[ 27.225353] dma dma0chan0: dwc_prep_slave_sg
[ 27.225470] dma dma0chan0: dwc_tx_submit: queued 42
[ 27.225482] dma dma0chan0: dwc_dostart_first_queued: started 42
[ 27.225626] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.225671] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.225683] dma dma0chan0: descriptor 42 complete
[ 27.246425] dma dma0chan0: dwc_prep_slave_sg
[ 27.273688] dma dma0chan0: dwc_tx_submit: queued 43
[ 27.273709] dma dma0chan0: dwc_dostart_first_queued: started 43
[ 27.273795] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.273819] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.273831] dma dma0chan0: descriptor 43 complete
[ 27.274158] dma dma0chan0: dwc_prep_slave_sg
[ 27.274611] dma dma0chan0: dwc_tx_submit: queued 44
[ 27.274624] dma dma0chan0: dwc_dostart_first_queued: started 44
[ 27.274700] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.274725] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.274736] dma dma0chan0: descriptor 44 complete
[ 27.274954] dma dma0chan0: dwc_prep_slave_sg
[ 27.275072] dma dma0chan0: dwc_tx_submit: queued 45
[ 27.275083] dma dma0chan0: dwc_dostart_first_queued: started 45
[ 27.275163] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.275215] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.275227] dma dma0chan0: descriptor 45 complete
[ 27.276379] dma dma0chan0: dwc_prep_slave_sg
[ 27.276500] dma dma0chan0: dwc_tx_submit: queued 46
[ 27.276510] dma dma0chan0: dwc_dostart_first_queued: started 46
[ 27.276611] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.276627] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.276639] dma dma0chan0: descriptor 46 complete
[ 27.276800] dma dma0chan0: dwc_prep_slave_sg
[ 27.276918] dma dma0chan0: dwc_tx_submit: queued 47
[ 27.276929] dma dma0chan0: dwc_dostart_first_queued: started 47
[ 27.277005] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.277018] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.277028] dma dma0chan0: descriptor 47 complete
[ 27.279525] dma dma0chan0: dwc_prep_slave_sg
[ 27.279661] dma dma0chan0: dwc_tx_submit: queued 48
[ 27.279672] dma dma0chan0: dwc_dostart_first_queued: started 48
[ 27.279889] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.279930] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.279942] dma dma0chan0: descriptor 48 complete
[ 27.280002] dma dma0chan0: dwc_prep_slave_sg
[ 27.280110] dma dma0chan0: dwc_tx_submit: queued 49
[ 27.280121] dma dma0chan0: dwc_dostart_first_queued: started 49
[ 27.280217] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.280244] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.280254] dma dma0chan0: descriptor 49 complete
[ 27.323286] dma dma0chan0: dwc_prep_slave_sg
[ 27.323434] dma dma0chan0: dwc_tx_submit: queued 50
[ 27.323445] dma dma0chan0: dwc_dostart_first_queued: started 50
[ 27.323949] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.323975] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.323987] dma dma0chan0: descriptor 50 complete
[ 27.324105] dma dma0chan0: dwc_prep_slave_sg
[ 27.324243] dma dma0chan0: dwc_tx_submit: queued 51
[ 27.324255] dma dma0chan0: dwc_dostart_first_queued: started 51
[ 27.325455] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.325490] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.325503] dma dma0chan0: descriptor 51 complete
[ 27.368335] dma dma0chan0: dwc_prep_slave_sg
[ 27.368498] dma dma0chan0: dwc_tx_submit: queued 52
[ 27.368507] dma dma0chan0: dwc_dostart_first_queued: started 52
[ 27.370380] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.370418] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.370431] dma dma0chan0: descriptor 52 complete
[ 27.396171] dma dma0chan0: dwc_prep_slave_sg
[ 27.396344] dma dma0chan0: dwc_tx_submit: queued 53
[ 27.396351] dma dma0chan0: dwc_dostart_first_queued: started 53
[ 27.398415] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.398436] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.398445] dma dma0chan0: descriptor 53 complete
[ 27.458504] dma dma0chan0: dwc_prep_slave_sg
[ 27.458684] dma dma0chan0: dwc_tx_submit: queued 54
[ 27.458695] dma dma0chan0: dwc_dostart_first_queued: started 54
[ 27.460597] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.460626] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.460638] dma dma0chan0: descriptor 54 complete
[ 27.559435] dma dma0chan0: dwc_prep_slave_sg
[ 27.559572] dma dma0chan0: dwc_tx_submit: queued 55
[ 27.559584] dma dma0chan0: dwc_dostart_first_queued: started 55
[ 27.560225] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.560269] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.560281] dma dma0chan0: descriptor 55 complete
[ 27.560377] dma dma0chan0: dwc_prep_slave_sg
[ 27.560484] dma dma0chan0: dwc_tx_submit: queued 56
[ 27.560495] dma dma0chan0: dwc_dostart_first_queued: started 56
[ 27.560605] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.560618] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.560628] dma dma0chan0: descriptor 56 complete
[ 27.560666] dma dma0chan0: dwc_prep_slave_sg
[ 27.560768] dma dma0chan0: dwc_tx_submit: queued 57
[ 27.560777] dma dma0chan0: dwc_dostart_first_queued: started 57
[ 27.560918] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.560931] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.560942] dma dma0chan0: descriptor 57 complete
[ 27.560981] dma dma0chan0: dwc_prep_slave_sg
[ 27.561084] dma dma0chan0: dwc_tx_submit: queued 58
[ 27.561094] dma dma0chan0: dwc_dostart_first_queued: started 58
[ 27.561381] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.561405] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.561416] dma dma0chan0: descriptor 58 complete
[ 27.561475] dma dma0chan0: dwc_prep_slave_sg
[ 27.561589] dma dma0chan0: dwc_tx_submit: queued 59
[ 27.561599] dma dma0chan0: dwc_dostart_first_queued: started 59
[ 27.562308] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.562334] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.562345] dma dma0chan0: descriptor 59 complete
[ 27.576777] dma dma0chan0: dwc_prep_slave_sg
[ 27.576891] dma dma0chan0: dwc_tx_submit: queued 60
[ 27.576897] dma dma0chan0: dwc_dostart_first_queued: started 60
[ 27.577540] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.577566] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.577575] dma dma0chan0: descriptor 60 complete
[ 27.577654] dma dma0chan0: dwc_prep_slave_sg
[ 27.577758] dma dma0chan0: dwc_tx_submit: queued 61
[ 27.577764] dma dma0chan0: dwc_dostart_first_queued: started 61
[ 27.578139] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.578160] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.578198] dma dma0chan0: descriptor 61 complete
[ 27.578263] dma dma0chan0: dwc_prep_slave_sg
[ 27.578364] dma dma0chan0: dwc_tx_submit: queued 62
[ 27.578370] dma dma0chan0: dwc_dostart_first_queued: started 62
[ 27.579012] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.579034] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.579042] dma dma0chan0: descriptor 62 complete
[ 27.579109] dma dma0chan0: dwc_prep_slave_sg
[ 27.579214] dma dma0chan0: dwc_tx_submit: queued 63
[ 27.579220] dma dma0chan0: dwc_dostart_first_queued: started 63
[ 27.579396] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.579410] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.579417] dma dma0chan0: descriptor 63 complete
[ 27.606932] dma dma0chan0: dwc_prep_slave_sg
[ 27.607090] dma dma0chan0: dwc_tx_submit: queued 64
[ 27.607097] dma dma0chan0: dwc_dostart_first_queued: started 64
[ 27.608550] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.608573] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.608582] dma dma0chan0: descriptor 64 complete
[ 27.608698] dma dma0chan0: dwc_prep_slave_sg
[ 27.608799] dma dma0chan0: dwc_tx_submit: queued 65
[ 27.608805] dma dma0chan0: dwc_dostart_first_queued: started 65
[ 27.609532] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.609541] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.609549] dma dma0chan0: descriptor 65 complete
[ 27.650596] dma dma0chan0: dwc_prep_slave_sg
[ 27.650732] dma dma0chan0: dwc_tx_submit: queued 66
[ 27.650744] dma dma0chan0: dwc_dostart_first_queued: started 66
[ 27.651115] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.651142] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.651154] dma dma0chan0: descriptor 66 complete
[ 27.651284] dma dma0chan0: dwc_prep_slave_sg
[ 27.651389] dma dma0chan0: dwc_tx_submit: queued 67
[ 27.651399] dma dma0chan0: dwc_dostart_first_queued: started 67
[ 27.652010] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.652042] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.652055] dma dma0chan0: descriptor 67 complete
[ 27.652129] dma dma0chan0: dwc_prep_slave_sg
[ 27.652248] dma dma0chan0: dwc_tx_submit: queued 68
[ 27.652259] dma dma0chan0: dwc_dostart_first_queued: started 68
[ 27.653223] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.653300] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.653313] dma dma0chan0: descriptor 68 complete
[ 27.653394] dma dma0chan0: dwc_prep_slave_sg
[ 27.653490] dma dma0chan0: dwc_tx_submit: queued 69
[ 27.653502] dma dma0chan0: dwc_dostart_first_queued: started 69
[ 27.653585] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.653598] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.653608] dma dma0chan0: descriptor 69 complete
[ 27.663960] dma dma0chan0: dwc_prep_slave_sg
[ 27.664071] dma dma0chan0: dwc_tx_submit: queued 70
[ 27.664078] dma dma0chan0: dwc_dostart_first_queued: started 70
[ 27.664159] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 27.664221] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 27.664229] dma dma0chan0: descriptor 70 complete
[ 29.301279] cgroup: new mount options do not match the existing superblock, will be ignored
[ 31.905758] dma dma0chan0: dwc_prep_slave_sg
[ 31.905883] dma dma0chan0: dwc_tx_submit: queued 71
[ 31.905895] dma dma0chan0: dwc_dostart_first_queued: started 71
[ 31.905971] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.905986] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.905997] dma dma0chan0: descriptor 71 complete
[ 31.934394] dma dma0chan0: dwc_prep_slave_sg
[ 31.934509] dma dma0chan0: dwc_tx_submit: queued 72
[ 31.934521] dma dma0chan0: dwc_dostart_first_queued: started 72
[ 31.934613] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.934628] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.934639] dma dma0chan0: descriptor 72 complete
[ 31.934828] dma dma0chan0: dwc_prep_slave_sg
[ 31.934936] dma dma0chan0: dwc_tx_submit: queued 73
[ 31.934946] dma dma0chan0: dwc_dostart_first_queued: started 73
[ 31.935025] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.935038] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.935048] dma dma0chan0: descriptor 73 complete
[ 31.947342] dma dma0chan0: dwc_prep_slave_sg
[ 31.947461] dma dma0chan0: dwc_tx_submit: queued 74
[ 31.947468] dma dma0chan0: dwc_dostart_first_queued: started 74
[ 31.947549] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.947561] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.947568] dma dma0chan0: descriptor 74 complete
[ 31.954387] dma dma0chan0: dwc_prep_slave_sg
[ 31.954501] dma dma0chan0: dwc_tx_submit: queued 75
[ 31.954508] dma dma0chan0: dwc_dostart_first_queued: started 75
[ 31.954591] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.954602] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.954610] dma dma0chan0: descriptor 75 complete
[ 31.980401] dma dma0chan0: dwc_prep_slave_sg
[ 31.980507] dma dma0chan0: dwc_tx_submit: queued 76
[ 31.980513] dma dma0chan0: dwc_dostart_first_queued: started 76
[ 31.980595] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 31.980606] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 31.980614] dma dma0chan0: descriptor 76 complete
[ 32.000447] dma dma0chan0: dwc_prep_slave_sg
[ 32.000571] dma dma0chan0: dwc_tx_submit: queued 77
[ 32.000577] dma dma0chan0: dwc_dostart_first_queued: started 77
[ 32.000677] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.000689] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.000697] dma dma0chan0: descriptor 77 complete
[ 32.014808] dma dma0chan0: dwc_prep_slave_sg
[ 32.014918] dma dma0chan0: dwc_tx_submit: queued 78
[ 32.014925] dma dma0chan0: dwc_dostart_first_queued: started 78
[ 32.014997] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.015015] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.015023] dma dma0chan0: descriptor 78 complete
[ 32.018397] dma dma0chan0: dwc_prep_slave_sg
[ 32.018514] dma dma0chan0: dwc_tx_submit: queued 79
[ 32.018521] dma dma0chan0: dwc_dostart_first_queued: started 79
[ 32.018609] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.018628] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.018635] dma dma0chan0: descriptor 79 complete
[ 32.034363] dma dma0chan0: dwc_prep_slave_sg
[ 32.034492] dma dma0chan0: dwc_tx_submit: queued 80
[ 32.034503] dma dma0chan0: dwc_dostart_first_queued: started 80
[ 32.034615] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.034632] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.034644] dma dma0chan0: descriptor 80 complete
[ 32.083561] dma dma0chan0: dwc_prep_slave_sg
[ 32.083726] dma dma0chan0: dwc_tx_submit: queued 81
[ 32.083733] dma dma0chan0: dwc_dostart_first_queued: started 81
[ 32.118603] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.118626] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.118635] dma dma0chan0: descriptor 81 complete
[ 32.118752] dma dma0chan0: dwc_prep_slave_sg
[ 32.118860] dma dma0chan0: dwc_tx_submit: queued 82
[ 32.118866] dma dma0chan0: dwc_dostart_first_queued: started 82
[ 32.119343] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.119361] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.119369] dma dma0chan0: descriptor 82 complete
[ 32.119420] dma dma0chan0: dwc_prep_slave_sg
[ 32.119519] dma dma0chan0: dwc_tx_submit: queued 83
[ 32.119525] dma dma0chan0: dwc_dostart_first_queued: started 83
[ 32.119748] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.119763] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.119770] dma dma0chan0: descriptor 83 complete
[ 32.119813] dma dma0chan0: dwc_prep_slave_sg
[ 32.119918] dma dma0chan0: dwc_tx_submit: queued 84
[ 32.119924] dma dma0chan0: dwc_dostart_first_queued: started 84
[ 32.120006] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.120015] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.120022] dma dma0chan0: descriptor 84 complete
[ 32.140290] dma dma0chan0: dwc_prep_slave_sg
[ 32.140470] dma dma0chan0: dwc_tx_submit: queued 85
[ 32.140481] dma dma0chan0: dwc_dostart_first_queued: started 85
[ 32.158070] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.158105] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.158118] dma dma0chan0: descriptor 85 complete
[ 32.166938] dma dma0chan0: dwc_prep_slave_sg
[ 32.167123] dma dma0chan0: dwc_tx_submit: queued 86
[ 32.167135] dma dma0chan0: dwc_dostart_first_queued: started 86
[ 32.173788] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.173817] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.173830] dma dma0chan0: descriptor 86 complete
[ 32.245914] dma dma0chan0: dwc_prep_slave_sg
[ 32.246081] dma dma0chan0: dwc_tx_submit: queued 87
[ 32.246088] dma dma0chan0: dwc_dostart_first_queued: started 87
[ 32.248689] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.248712] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.248721] dma dma0chan0: descriptor 87 complete
[ 32.387388] dma dma0chan0: dwc_prep_slave_sg
[ 32.387554] dma dma0chan0: dwc_tx_submit: queued 88
[ 32.387566] dma dma0chan0: dwc_dostart_first_queued: started 88
[ 32.389537] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.389574] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.389587] dma dma0chan0: descriptor 88 complete
[ 32.507499] dma dma0chan0: dwc_prep_slave_sg
[ 32.507652] dma dma0chan0: dwc_tx_submit: queued 89
[ 32.507658] dma dma0chan0: dwc_dostart_first_queued: started 89
[ 32.509752] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.509772] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.509782] dma dma0chan0: descriptor 89 complete
[ 32.600236] dma dma0chan0: dwc_prep_slave_sg
[ 32.600409] dma dma0chan0: dwc_tx_submit: queued 90
[ 32.600416] dma dma0chan0: dwc_dostart_first_queued: started 90
[ 32.602307] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.602332] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.602342] dma dma0chan0: descriptor 90 complete
[ 32.604881] dma dma0chan0: dwc_prep_slave_sg
[ 32.605025] dma dma0chan0: dwc_tx_submit: queued 91
[ 32.605032] dma dma0chan0: dwc_dostart_first_queued: started 91
[ 32.605950] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.605968] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.605977] dma dma0chan0: descriptor 91 complete
[ 32.606076] dma dma0chan0: dwc_prep_slave_sg
[ 32.606184] dma dma0chan0: dwc_tx_submit: queued 92
[ 32.606190] dma dma0chan0: dwc_dostart_first_queued: started 92
[ 32.606919] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.606927] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.606933] dma dma0chan0: descriptor 92 complete
[ 32.752051] dma dma0chan0: dwc_prep_slave_sg
[ 32.752168] dma dma0chan0: dwc_tx_submit: queued 93
[ 32.752174] dma dma0chan0: dwc_dostart_first_queued: started 93
[ 32.752250] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.752268] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.752275] dma dma0chan0: descriptor 93 complete
[ 32.754799] dma dma0chan0: dwc_prep_slave_sg
[ 32.754913] dma dma0chan0: dwc_tx_submit: queued 94
[ 32.754919] dma dma0chan0: dwc_dostart_first_queued: started 94
[ 32.754992] sata-dwc 4bffd1000.sata: dw_dma_interrupt: status=0x1
[ 32.755003] sata-dwc 4bffd1000.sata: dw_dma_tasklet: status_err=0
[ 32.755011] dma dma0chan0: descriptor 94 complete
[ 35.454486] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 179.686509] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 179.713688] EXT4-fs (sdb3): warning: mounting unchecked fs, running e2fsck is recommended
[ 179.725994] EXT4-fs (sdb3): mounted filesystem without journal. Opts: (null)
-------------- next part --------------
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.04.23 11:26:53 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot 2015.a (May 16 2015 - 14:20:11)
CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex/cr, PCIe 4x + SATA-2
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)
PCI: Bus Dev VenId DevId Class Int
00 04 1095 3512 0104 00
00 06 126f 0501 0380 00
PCIE1: successfully set as root-complex
02 00 1002 683f 0300 ff
Net: ppc_4xx_eth0
FPGA: Revision 03 (2010-10-07)
SM502: found
PERMD2:not found
VGA: 1
VESA: OK
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Linux version 4.6.0-rc4-next-20160421-sam460ex-jm (root at julian-VirtualBox) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #2 PREEMPT Sat Apr 23 09:26:44 AST 2016
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sdb2 rootdelay=10 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2001648K/2097152K available (7424K kernel code, 316K rwdata, 3816K rodata, 240K init, 370K bss, 95504K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000149] Console: colour dummy device 80x25
[ 0.000701] console [tty0] enabled
[ 0.000735] pid_max: default: 32768 minimum: 301
[ 0.000846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003501] devtmpfs: initialized
[ 0.006153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006544] xor: measuring software checksum speed
[ 0.016612] 8regs : 896.000 MB/sec
[ 0.026438] 8regs_prefetch: 800.000 MB/sec
[ 0.036484] 32regs : 1232.000 MB/sec
[ 0.046564] 32regs_prefetch: 1084.000 MB/sec
[ 0.046599] xor: using function: 32regs (1232.000 MB/sec)
[ 0.046626] prandom: seed boundary self test passed
[ 0.048680] prandom: 100 self tests passed
[ 0.049389] NET: Registered protocol family 16
[ 0.054839] cpuidle: using governor ladder
[ 0.056802] cpuidle: using governor menu
[ 0.057205] 256k L2-cache enabled
[ 0.057287] PCIE0: Port disabled via device-tree
[ 0.057347] PCIE1: Checking link...
[ 0.057364] PCIE1: Device detected, waiting for link...
[ 0.057383] PCIE1: link is up !
[ 0.159657] PCI host bridge /plb/pciex at d20000000 (primary) ranges:
[ 0.159707] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.159744] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.159775] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.159812] 4xx PCI DMA offset set to 0x00000000
[ 0.159829] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159848] DMA window size 0x0000000080000000
[ 0.159884] PCIE1: successfully set as root-complex
[ 0.159977] PCI host bridge /plb/pci at c0ec00000 (primary) ranges:
[ 0.160006] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.160041] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.160072] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.160102] 4xx PCI DMA offset set to 0x00000000
[ 0.160119] 4xx PCI DMA window base to 0x0000000000000000
[ 0.160138] DMA window size 0x0000000080000000
[ 0.169685] PCI: Probing PCI hardware
[ 0.170005] PCI host bridge to bus 0000:80
[ 0.170043] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.170079] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.170117] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.170155] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.170281] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.171448] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.171759] PCI host bridge to bus 0001:00
[ 0.171792] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.171818] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.171855] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.171893] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.172664] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172709] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.172736] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.172767] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172809] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.172848] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.172882] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.172920] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.172948] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.172971] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.172997] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.173023] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.173120] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.173148] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.173175] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.173207] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.173234] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.173259] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.173284] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.173310] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.173335] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.237400] raid6: int32x1 gen() 300 MB/s
[ 0.254364] raid6: int32x1 xor() 162 MB/s
[ 0.271495] raid6: int32x2 gen() 390 MB/s
[ 0.288548] raid6: int32x2 xor() 236 MB/s
[ 0.305718] raid6: int32x4 gen() 437 MB/s
[ 0.322740] raid6: int32x4 xor() 255 MB/s
[ 0.339907] raid6: int32x8 gen() 277 MB/s
[ 0.356885] raid6: int32x8 xor() 205 MB/s
[ 0.356910] raid6: using algorithm int32x4 gen() 437 MB/s
[ 0.356928] raid6: .... xor() 255 MB/s, rmw enabled
[ 0.356947] raid6: using intx1 recovery algorithm
[ 0.357451] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.357496] vgaarb: loaded
[ 0.357511] vgaarb: bridge control possible 0000:81:00.0
[ 0.357969] SCSI subsystem initialized
[ 0.359092] usbcore: registered new interface driver usbfs
[ 0.359222] usbcore: registered new interface driver hub
[ 0.359350] usbcore: registered new device driver usb
[ 0.359671] pps_core: LinuxPPS API ver. 1 registered
[ 0.359701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.359797] PTP clock support registered
[ 0.360777] EDAC MC: Ver: 3.0.0
[ 0.361939] Advanced Linux Sound Architecture Driver Initialized.
[ 0.363172] clocksource: Switched to clocksource timebase
[ 0.363408] FS-Cache: Loaded
[ 0.363625] CacheFiles: Loaded
[ 0.379929] NET: Registered protocol family 2
[ 0.380588] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.380719] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.381043] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.381786] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.381896] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.382328] NET: Registered protocol family 1
[ 0.382592] RPC: Registered named UNIX socket transport module.
[ 0.382624] RPC: Registered udp transport module.
[ 0.382641] RPC: Registered tcp transport module.
[ 0.382659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.383594] Could not remap bcsr
[ 0.389981] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.392859] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.393465] workingset: timestamp_bits=28 max_order=19 bucket_order=0
[ 0.413718] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.414344] fuse init (API version 7.24)
[ 0.419421] async_tx: api initialized (async)
[ 0.419516] bounce: pool size: 64 pages
[ 0.419608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.419641] io scheduler noop registered
[ 0.419807] io scheduler cfq registered (default)
[ 0.422164] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.422269] crc32: self tests passed, processed 225944 bytes in 989276 nsec
[ 0.423439] crc32c: CRC_LE_BITS = 64
[ 0.423465] crc32c: self tests passed, processed 225944 bytes in 494887 nsec
[ 0.492728] crc32_combine: 8373 self tests passed
[ 0.562174] crc32c_combine: 8373 self tests passed
[ 0.562226] glob: 64 self-tests passed, 0 failed
[ 0.661395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.662544] console [ttyS0] disabled
[ 0.683750] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.620899] console [ttyS0] enabled
[ 1.645418] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.655614] console [ttyS0] disabled
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Linux version 4.6.0-rc4-next-20160421-sam460ex-jm (root at julian-VirtualBox) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #2 PREEMPT Sat Apr 23 09:26:44 AST 2016
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sdb2 rootdelay=10 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2001648K/2097152K available (7424K kernel code, 316K rwdata, 3816K rodata, 240K init, 370K bss, 95504K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000149] Console: colour dummy device 80x25
[ 0.000701] console [tty0] enabled
[ 0.000735] pid_max: default: 32768 minimum: 301
[ 0.000846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003501] devtmpfs: initialized
[ 0.006153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006544] xor: measuring software checksum speed
[ 0.016612] 8regs : 896.000 MB/sec
[ 0.026438] 8regs_prefetch: 800.000 MB/sec
[ 0.036484] 32regs : 1232.000 MB/sec
[ 0.046564] 32regs_prefetch: 1084.000 MB/sec
[ 0.046599] xor: using function: 32regs (1232.000 MB/sec)
[ 0.046626] prandom: seed boundary self test passed
[ 0.048680] prandom: 100 self tests passed
[ 0.049389] NET: Registered protocol family 16
[ 0.054839] cpuidle: using governor ladder
[ 0.056802] cpuidle: using governor menu
[ 0.057205] 256k L2-cache enabled
[ 0.057287] PCIE0: Port disabled via device-tree
[ 0.057347] PCIE1: Checking link...
[ 0.057364] PCIE1: Device detected, waiting for link...
[ 0.057383] PCIE1: link is up !
[ 0.159657] PCI host bridge /plb/pciex at d20000000 (primary) ranges:
[ 0.159707] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.159744] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.159775] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.159812] 4xx PCI DMA offset set to 0x00000000
[ 0.159829] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159848] DMA window size 0x0000000080000000
[ 0.159884] PCIE1: successfully set as root-complex
[ 0.159977] PCI host bridge /plb/pci at c0ec00000 (primary) ranges:
[ 0.160006] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.160041] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.160072] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.160102] 4xx PCI DMA offset set to 0x00000000
[ 0.160119] 4xx PCI DMA window base to 0x0000000000000000
[ 0.160138] DMA window size 0x0000000080000000
[ 0.169685] PCI: Probing PCI hardware
[ 0.170005] PCI host bridge to bus 0000:80
[ 0.170043] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.170079] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.170117] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.170155] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.170281] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.171448] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.171759] PCI host bridge to bus 0001:00
[ 0.171792] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.171818] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.171855] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.171893] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.172664] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172709] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.172736] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.172767] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.172809] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.172848] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.172882] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.172920] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.172948] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.172971] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.172997] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.173023] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.173120] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.173148] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.173175] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.173207] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.173234] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.173259] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.173284] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.173310] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.173335] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.237400] raid6: int32x1 gen() 300 MB/s
[ 0.254364] raid6: int32x1 xor() 162 MB/s
[ 0.271495] raid6: int32x2 gen() 390 MB/s
[ 0.288548] raid6: int32x2 xor() 236 MB/s
[ 0.305718] raid6: int32x4 gen() 437 MB/s
[ 0.322740] raid6: int32x4 xor() 255 MB/s
[ 0.339907] raid6: int32x8 gen() 277 MB/s
[ 0.356885] raid6: int32x8 xor() 205 MB/s
[ 0.356910] raid6: using algorithm int32x4 gen() 437 MB/s
[ 0.356928] raid6: .... xor() 255 MB/s, rmw enabled
[ 0.356947] raid6: using intx1 recovery algorithm
[ 0.357451] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.357496] vgaarb: loaded
[ 0.357511] vgaarb: bridge control possible 0000:81:00.0
[ 0.357969] SCSI subsystem initialized
[ 0.359092] usbcore: registered new interface driver usbfs
[ 0.359222] usbcore: registered new interface driver hub
[ 0.359350] usbcore: registered new device driver usb
[ 0.359671] pps_core: LinuxPPS API ver. 1 registered
[ 0.359701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.359797] PTP clock support registered
[ 0.360777] EDAC MC: Ver: 3.0.0
[ 0.361939] Advanced Linux Sound Architecture Driver Initialized.
[ 0.363172] clocksource: Switched to clocksource timebase
[ 0.363408] FS-Cache: Loaded
[ 0.363625] CacheFiles: Loaded
[ 0.379929] NET: Registered protocol family 2
[ 0.380588] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.380719] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.381043] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.381786] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.381896] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.382328] NET: Registered protocol family 1
[ 0.382592] RPC: Registered named UNIX socket transport module.
[ 0.382624] RPC: Registered udp transport module.
[ 0.382641] RPC: Registered tcp transport module.
[ 0.382659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.383594] Could not remap bcsr
[ 0.389981] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.392859] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.393465] workingset: timestamp_bits=28 max_order=19 bucket_order=0
[ 0.413718] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.414344] fuse init (API version 7.24)
[ 0.419421] async_tx: api initialized (async)
[ 0.419516] bounce: pool size: 64 pages
[ 0.419608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.419641] io scheduler noop registered
[ 0.419807] io scheduler cfq registered (default)
[ 0.422164] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.422269] crc32: self tests passed, processed 225944 bytes in 989276 nsec
[ 0.423439] crc32c: CRC_LE_BITS = 64
[ 0.423465] crc32c: self tests passed, processed 225944 bytes in 494887 nsec
[ 0.492728] crc32_combine: 8373 self tests passed
[ 0.562174] crc32c_combine: 8373 self tests passed
[ 0.562226] glob: 64 self-tests passed, 0 failed
[ 0.661395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.662544] console [ttyS0] disabled
[ 0.683750] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.620899] console [ttyS0] enabled
[ 1.645418] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.655614] console [ttyS0] disabled
[ 1.659530] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 2.621341] console [ttyS0] enabled
[ 2.625747] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 2.635484] Generic non-volatile memory driver v1.1
[ 2.640973] [drm] Initialized drm 1.1.0 20060810
[ 2.645924] [drm] radeon kernel modesetting enabled.
[ 2.652014] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 2.660241] [drm] register mmio base: 0xe90000000
[ 2.665009] [drm] register mmio size: 262144
[ 3.001253] ATOM BIOS: C44501
[ 3.004549] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.013476] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 3.021168] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.026065] [drm] RAM width 128bits DDR
[ 3.030094] [TTM] Zone kernel: Available graphics memory: 378440 kiB
[ 3.036585] [TTM] Zone highmem: Available graphics memory: 1033800 kiB
[ 3.043142] [TTM] Initializing pool allocator
[ 3.047545] [TTM] Initializing DMA pool allocator
[ 3.052369] [drm] radeon: 1024M of VRAM memory ready
[ 3.057378] [drm] radeon: 2048M of GTT memory ready.
[ 3.062408] [drm] Loading verde Microcode
[ 3.066469] [drm] Internal thermal controller with fan control
[ 3.072623] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.121797] [drm] radeon: dpm initialized
[ 3.128222] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 3.134469] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.151139] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.210767] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[ 3.218077] radeon 0000:81:00.0: WB enabled
[ 3.222320] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xee962c00
[ 3.232441] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xee962c04
[ 3.242562] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xee962c08
[ 3.252683] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xee962c0c
[ 3.262805] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xee962c10
[ 3.304324] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.341458] radeon 0000:81:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xee962c18
[ 3.351618] radeon 0000:81:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xee962c1c
[ 3.361759] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.368404] [drm] Driver supports precise vblank timestamp query.
[ 3.374523] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.380446] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.388716] radeon 0000:81:00.0: radeon: using MSI.
[ 3.393673] [drm] radeon: irq initialized.
[ 4.152902] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 4.161744] radeon 0000:81:00.0: disabling GPU acceleration
[ 4.370696] [drm] Radeon Display Connectors
[ 4.375369] [drm] Connector 0:
[ 4.378506] [drm] HDMI-A-1
[ 4.381460] [drm] HPD4
[ 4.384046] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.391495] [drm] Encoders:
[ 4.394493] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.398783] [drm] Connector 1:
[ 4.401854] [drm] DVI-I-1
[ 4.404666] [drm] HPD2
[ 4.407221] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.414647] [drm] Encoders:
[ 4.417635] [drm] DFP2: INTERNAL_UNIPHY
[ 4.421836] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.540136] [drm] fb mappable at 0x806E9000
[ 4.544354] [drm] vram apper at 0x80000000
[ 4.548468] [drm] size 8294400
[ 4.551541] [drm] fb depth is 24
[ 4.554786] [drm] pitch is 7680
[ 4.850224] Console: switching to colour frame buffer device 240x67
[ 4.929533] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 4.939239] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 4.947588] [drm] amdgpu kernel modesetting enabled.
[ 4.967357] brd: module loaded
[ 4.977422] loop: module loaded
[ 4.981255] sm501 0001:00:06.0: enabling device (0004 -> 0006)
[ 4.987695] sm501 0001:00:06.0: incorrect device id c0000105
[ 4.994354] sata-dwc 4bffd1000.sata: id 0, controller version 1.82
[ 5.001510] sata-dwc 4bffd1000.sata: DesignWare DMA Controller, 1 channels
[ 5.009740] scsi host0: sata-dwc
[ 5.013516] ata1: SATA max UDMA/133 irq 36
[ 5.018829] libphy: Fixed MDIO Bus: probed
[ 5.023585] PPC 4xx OCP EMAC driver, version 3.54
[ 5.029015] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 5.035369] ZMII /plb/opb/emac-zmii at ef600d00 initialized
[ 5.041307] RGMII /plb/opb/emac-rgmii at ef601500 initialized with MDIO support
[ 5.049042] TAH /plb/opb/emac-tah at ef601350 initialized
[ 5.054638] TAH /plb/opb/emac-tah at ef601450 initialized
[ 5.060481] /plb/opb/emac-rgmii at ef601500: input 0 in RGMII mode
[ 5.068225] eth0: EMAC-0 /plb/opb/ethernet at ef600e00, MAC 00:50:c2:80:d5:c5
[ 5.075645] eth0: found Generic MII PHY (0x00)
[ 5.080589] /plb/opb/emac-rgmii at ef601500: input 1 in RGMII mode
[ 5.088248] eth1: EMAC-1 /plb/opb/ethernet at ef600f00, MAC 00:00:00:00:00:00
[ 5.095666] eth1: found Generic MII PHY (0x01)
[ 5.100514] PPP generic driver version 2.4.2
[ 5.105449] PPP BSD Compression module registered
[ 5.110580] PPP Deflate Compression module registered
[ 5.115965] NET: Registered protocol family 24
[ 5.121025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.128292] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 5.133410] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 5.142777] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 5.155181] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 5.161907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.169109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.176757] usb usb1: Product: OF EHCI
[ 5.180742] usb usb1: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ehci_hcd
[ 5.203447] usb usb1: SerialNumber: PPC-OF USB
[ 5.222965] hub 1-0:1.0: USB hub found
[ 5.241218] hub 1-0:1.0: 1 port detected
[ 5.259745] ehci-pci: EHCI PCI platform driver
[ 5.278695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.299590] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 5.318905] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 5.341508] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.363024] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 5.384045] ata1.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 5.384052] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32)
[ 5.428344] ata1.00: configured for UDMA/133
[ 5.448212] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 5.477976] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 5.501310] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.523111] sd 0:0:0:0: [sda] Write Protect is off
[ 5.547368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.596183] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 5.626927] sda: sda1
[ 5.627999] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.838612] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 5.882178] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.933330] hub 1-1:1.0: USB hub found
[ 5.975180] hub 1-1:1.0: 7 ports detected
[ 6.225870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.249419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.273268] usb usb2: Product: OF OHCI
[ 6.293418] usb usb2: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ohci_hcd
[ 6.318084] usb usb2: SerialNumber: PPC-OF USB
[ 6.339924] hub 2-0:1.0: USB hub found
[ 6.360481] hub 2-0:1.0: 1 port detected
[ 6.381592] ohci-pci: OHCI PCI platform driver
[ 6.402587] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 6.427392] usbcore: registered new interface driver usblp
[ 6.450043] usbcore: registered new interface driver usb-storage
[ 6.473043] usbcore: registered new interface driver usbserial
[ 6.495723] usbcore: registered new interface driver usbserial_generic
[ 6.518937] usbserial: USB Serial support registered for generic
[ 6.542275] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 6.565758] mousedev: PS/2 mouse device common for all mice
[ 6.565764] i2c /dev entries driver
[ 6.567794] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 6.568137] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 6.568293] md: linear personality registered for level -1
[ 6.568297] md: raid0 personality registered for level 0
[ 6.568300] md: raid1 personality registered for level 1
[ 6.568304] md: raid10 personality registered for level 10
[ 6.569330] md: raid6 personality registered for level 6
[ 6.569334] md: raid5 personality registered for level 5
[ 6.569337] md: raid4 personality registered for level 4
[ 6.569986] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[ 6.569990] EDAC PPC4xx MC: v1.0.0
[ 6.569993] EDAC PPC4xx MC: Reporting type: interrupt
[ 6.570655] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.572018] usbcore: registered new interface driver usbhid
[ 6.572020] usbhid: USB HID core driver
[ 6.577720] no UART detected at 0x1
[ 6.578465] usbcore: registered new interface driver snd-usb-audio
[ 6.578575] usbcore: registered new interface driver snd-ua101
[ 6.578688] usbcore: registered new interface driver snd-usb-usx2y
[ 6.578860] ipip: IPv4 over IPv4 tunneling driver
[ 6.580413] Initializing XFRM netlink socket
[ 6.581574] NET: Registered protocol family 10
[ 6.583379] sit: IPv6 over IPv4 tunneling driver
[ 6.583983] NET: Registered protocol family 17
[ 6.584005] NET: Registered protocol family 15
[ 6.608677] Key type encrypted registered
[ 6.609065] hctosys: unable to open rtc device (rtc0)
[ 6.609308] ALSA device list:
[ 6.609313] #0: Virtual MIDI Card 1
[ 7.221603] Waiting 10 sec before mounting root device...
[ 7.241416] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.241422] usb 1-1.1: Product: USB 2.0 Hub
[ 7.242101] hub 1-1.1:1.0: USB hub found
[ 7.242288] hub 1-1.1:1.0: 4 ports detected
[ 7.392187] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 7.507149] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 7.528211] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.549647] usb 1-1.2: Product: USB Keyboard
[ 7.567750] usb 1-1.2: Manufacturer: CHICONY
[ 7.592794] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 7.671196] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 7.693808] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 7.807400] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 7.829724] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.852641] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 7.897543] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 7.927721] usb 1-1.5: new high-speed USB device number 6 using ppc-of-ehci
[ 8.002662] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 8.044261] usb 1-1.5: New USB device found, idVendor=0781, idProduct=5530
[ 8.067927] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.092067] usb 1-1.5: Product: Cruzer
[ 8.112629] usb 1-1.5: Manufacturer: SanDisk
[ 8.133688] usb 1-1.5: SerialNumber: 200517373207B181D66A
[ 8.156601] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[ 8.179893] scsi host1: usb-storage 1-1.5:1.0
[ 8.274190] usb 1-1.6: new full-speed USB device number 7 using ppc-of-ehci
[ 8.386988] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 8.411267] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.435933] usb 1-1.6: Product: USB Receiver
[ 8.457385] usb 1-1.6: Manufacturer: Logitech
[ 8.482586] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 8.565341] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 8.602293] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 8.684721] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 8.721791] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 8.826187] usb 1-1.7: new high-speed USB device number 8 using ppc-of-ehci
[ 8.944715] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 8.971305] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.998342] usb 1-1.7: Product: Ultra Fast Media
[ 9.022891] usb 1-1.7: Manufacturer: Generic
[ 9.047130] usb 1-1.7: SerialNumber: 000000225001
[ 9.072357] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 9.098648] scsi host2: usb-storage 1-1.7:1.0
[ 9.204422] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5
[ 9.233951] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.260307] sd 1:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.289710] sd 1:0:0:0: [sdb] Write Protect is off
[ 9.315711] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.355380] sdb: sdb1 sdb2 sdb3
[ 9.383460] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 10.124368] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 10.154723] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 10.182700] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 17.320229] md: Waiting for all devices to be available before autodetect
[ 17.348105] md: If you don't use raid, use raid=noautodetect
[ 17.375599] md: Autodetecting RAID arrays.
[ 17.401015] md: Scanned 0 and added 0 devices.
[ 17.426682] md: autorun ...
[ 17.450558] md: ... autorun DONE.
[ 17.476340] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities
[ 17.506702] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities
[ 17.538521] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 17.566553] EXT4-fs (sdb2): write access will be enabled during recovery
[ 17.605249] EXT4-fs (sdb2): recovery complete
[ 17.632470] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.661659] VFS: Mounted root (ext4 filesystem) readonly on device 8:18.
[ 17.693567] devtmpfs: mounted
[ 17.718490] Freeing unused kernel memory: 240K (c0afe000 - c0b3a000)
[ 17.746442] This architecture does not have kernel memory protection.
[ 18.080931] random: nonblocking pool is initialized
[ 18.334276] systemd[1]: System time before build time, advancing clock.
[ 18.448818] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 18.489620] systemd[1]: Detected architecture ppc.
[ 18.582866] systemd[1]: Set hostname to <Amigaone>.
[ 19.501812] systemd[1]: Listening on udev Kernel Socket.
[ 19.548344] systemd[1]: Reached target User and Group Name Lookups.
[ 19.594553] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 19.641852] systemd[1]: Reached target Swap.
[ 19.686689] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 19.735524] systemd[1]: Listening on Syslog Socket.
[ 19.781577] systemd[1]: Listening on udev Control Socket.
[ 19.828332] systemd[1]: Listening on Journal Socket.
[ 19.873676] systemd[1]: Created slice User and Session Slice.
[ 19.937363] systemd[1]: Reached target Encrypted Volumes.
[ 19.981301] systemd[1]: Listening on Journal Socket (/dev/log).
[ 20.025368] systemd[1]: Created slice System Slice.
[ 20.068157] systemd[1]: Reached target Slices.
[ 20.112770] systemd[1]: Starting Braille Device Support...
[ 20.177269] systemd[1]: Starting Uncomplicated firewall...
[ 20.231055] systemd[1]: Started Read required files in advance.
[ 20.292386] systemd[1]: Mounting POSIX Message Queue File System...
[ 20.354044] systemd[1]: Starting Nameserver information manager...
[ 20.413924] systemd[1]: Mounting Debug File System...
[ 20.478260] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 20.565501] systemd[1]: Starting Load Kernel Modules...
[ 20.638155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.690550] systemd[1]: Reached target Remote File Systems (Pre).
[ 20.737361] systemd[1]: Reached target Remote File Systems.
[ 20.784018] systemd[1]: Created slice system-getty.slice.
[ 20.832715] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 20.898690] systemd[1]: Starting Journal Service...
[ 20.956698] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 21.025068] systemd[1]: Mounted Debug File System.
[ 21.077076] systemd[1]: Mounted POSIX Message Queue File System.
[ 21.140850] systemd[1]: brltty.service: Main process exited, code=exited, status=228/SECCOMP
[ 21.198910] systemd[1]: Failed to start Braille Device Support.
[ 21.336340] systemd[1]: brltty.service: Unit entered failed state.
[ 21.389320] systemd[1]: brltty.service: Failed with result 'exit-code'.
[ 21.447145] systemd[1]: Started Uncomplicated firewall.
[ 21.501906] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 21.540607] systemd[1]: ureadahead.service: Unit entered failed state.
[ 21.566963] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 21.606548] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 21.648031] systemd[1]: Failed to start Load Kernel Modules.
[ 21.714237] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 21.741561] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 21.770592] systemd[1]: Started Create Static Device Nodes in /dev.
[ 21.820444] systemd[1]: Started Nameserver information manager.
[ 21.897271] systemd[1]: Started Journal Service.
Ubuntu 16.04 LTS Amigaone ttyS0
Amigaone login: amigaone
Password:
Last login: Thu Apr 21 15:09:20 AST 2016 on tty1
Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.6.0-rc4-next-20160421-sam460ex-jm ppc)
* Documentation: https://help.ubuntu.com/
0 packages can be updated.
0 updates are security updates.
amigaone at Amigaone:~$ [ 364.552919] dma dma0chan0: desc: s0xbffd1400 d0x1d9de000 l0x0 c0x400:a0dc25
[ 395.054815] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 395.063023] ata1.00: failed command: READ FPDMA QUEUED
[ 395.068856] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
[ 395.068856] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 395.084030] ata1.00: status: { DRDY }
[ 396.168785] usb 1-1-port5: cannot reset (err = -110)
[ 397.198774] usb 1-1-port5: cannot reset (err = -110)
[ 398.228770] usb 1-1-port5: cannot reset (err = -110)
[ 399.258768] usb 1-1-port5: cannot reset (err = -110)
[ 400.288763] usb 1-1-port5: cannot reset (err = -110)
[ 400.293764] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad?
[ 401.325746] usb 1-1-port5: cannot disable (err = -110)
[ 402.355745] usb 1-1-port7: cannot reset (err = -110)
[ 403.385741] usb 1-1-port7: cannot reset (err = -110)
[ 404.415763] usb 1-1-port7: cannot reset (err = -110)
[ 405.445725] usb 1-1-port7: cannot reset (err = -110)
[ 406.475727] usb 1-1-port7: cannot reset (err = -110)
[ 406.480727] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad?
[ 407.512692] usb 1-1-port7: cannot disable (err = -110)
[ 408.542704] usb 1-1-port5: cannot reset (err = -110)
[ 409.572685] usb 1-1-port5: cannot reset (err = -110)
[ 410.602696] usb 1-1-port5: cannot reset (err = -110)
[ 411.632672] usb 1-1-port5: cannot reset (err = -110)
[ 412.662673] usb 1-1-port5: cannot reset (err = -110)
[ 412.667672] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad?
[ 413.699653] usb 1-1-port5: cannot disable (err = -110)
[ 414.729675] usb 1-1-port7: cannot reset (err = -110)
[ 415.759648] usb 1-1-port7: cannot reset (err = -110)
[ 416.789653] usb 1-1-port7: cannot reset (err = -110)
[ 417.819629] usb 1-1-port7: cannot reset (err = -110)
[ 418.849641] usb 1-1-port7: cannot reset (err = -110)
[ 418.854642] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad?
[ 419.886615] usb 1-1-port7: cannot disable (err = -110)
[ 420.916619] usb 1-1-port5: cannot reset (err = -110)
[ 421.946599] usb 1-1-port5: cannot reset (err = -110)
[ 422.976605] usb 1-1-port5: cannot reset (err = -110)
[ 424.006585] usb 1-1-port5: cannot reset (err = -110)
[ 425.036584] usb 1-1-port5: cannot reset (err = -110)
[ 425.041575] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad?
[ 426.073561] usb 1-1-port5: cannot disable (err = -110)
[ 426.094563] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 426.102377] ata1.00: failed command: READ FPDMA QUEUED
[ 426.108216] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
[ 426.108216] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 426.123408] ata1.00: status: { DRDY }
[ 427.103557] usb 1-1-port7: cannot reset (err = -110)
[ 428.133542] usb 1-1-port7: cannot reset (err = -110)
[ 429.163535] usb 1-1-port7: cannot reset (err = -110)
[ 430.193533] usb 1-1-port7: cannot reset (err = -110)
[ 431.223523] usb 1-1-port7: cannot reset (err = -110)
[ 431.228522] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad?
[ 432.260513] usb 1-1-port7: cannot disable (err = -110)
[ 433.290508] usb 1-1-port5: cannot reset (err = -110)
[ 434.320501] usb 1-1-port5: cannot reset (err = -110)
[ 435.350492] usb 1-1-port5: cannot reset (err = -110)
[ 436.380494] usb 1-1-port5: cannot reset (err = -110)
[ 437.410477] usb 1-1-port5: cannot reset (err = -110)
[ 437.415474] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad?
[ 438.447475] usb 1-1-port5: cannot disable (err = -110)
[ 439.477462] usb 1-1-port7: cannot reset (err = -110)
[ 439.482465] usb 1-1-port5: cannot disable (err = -110)
[ 439.514468] blk_update_request: I/O error, dev sdb, sector 1819224
[ 439.522430] Aborting journal on device sdb2-8.
[ 439.585470] blk_update_request: I/O error, dev sdb, sector 8213352
[ 439.653469] blk_update_request: I/O error, dev sdb, sector 9801112
[ 439.661444] EXT4-fs (sdb2): Delayed block allocation failed for inode 45043 at logical offset 0 with max blocks 8 with error 5
[ 439.673503] EXT4-fs (sdb2): This should not happen!! Data will be lost
[ 439.673503]
[ 439.681868] EXT4-fs error (device sdb2) in ext4_writepages:2738: IO failure
[ 439.865563] blk_update_request: I/O error, dev sdb, sector 206848
[ 439.871698] Buffer I/O error on dev sdb2, logical block 0, lost sync page write
[ 439.879238] EXT4-fs error (device sdb2): ext4_journal_check_start:56: Detected aborted journal[ 439.920602] EXT4-fs (sdb2): Remounting filesystem read-only
[ 439.950464] blk_update_request: I/O error, dev sdb, sector 9801408
[ 439.950483] Buffer I/O error on device sdb2, logical block 1199320
[ 439.979078] JBD2: Error -5 detected when updating journal superblock for sdb2-8.
[ 439.979160] JBD2: Error -5 detected when updating journal superblock for sdb2-8.
[ 439.979273] JBD2: Error -5 detected when updating journal superblock for sdb2-8.
[ 440.507458] usb 1-1-port7: cannot reset (err = -110)
[ 441.537482] usb 1-1-port7: cannot reset (err = -110)
[ 441.957443] EXT4-fs error (device sdb2): ext4_find_entry:1456: inode #142293: comm caja: reading directory lblock 0
[ 442.268607] EXT4-fs (sdb2): previous I/O error to superblock detected
[ 442.567457] usb 1-1-port7: cannot reset (err = -110)
[ 443.408525] systemd-gpt-auto-generator[5429]: /dev/sdb: failed to allocate prober: No medium found
[ 443.597456] usb 1-1-port7: cannot reset (err = -110)
[ 443.615403] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad?
[ 444.627444] hub 1-1:1.0: hub_ext_port_status failed (err = -110)
[ 444.688425] usb 1-1-port7: cannot disable (err = -110)
[ 445.125416] EXT4-fs error (device sdb2): ext4_find_entry:1456: inode #142419: comm tilda: reading directory lblock 0
[ 445.211409] EXT4-fs (sdb2): previous I/O error to superblock detected
[ 445.731674] usb 1-1-port7: cannot disable (err = -110)
[ 445.744587] sd 2:0:0:0: timing out command, waited 60s
[ 450.869372] hub 1-1:1.0: hub_ext_port_status failed (err = -110)
[ 456.005328] hub 1-1:1.0: hub_ext_port_status failed (err = -110)
[ 457.070320] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 457.078131] ata1.00: failed command: READ FPDMA QUEUED
[ 457.083693] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
[ 457.083693] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 457.098818] ata1.00: status: { DRDY }
[ 488.046060] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 488.055065] ata1.00: failed command: READ FPDMA QUEUED
[ 488.060817] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
[ 488.060817] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 488.075893] ata1.00: status: { DRDY }
[ 497.606246] sata-dwc 4bffd1000.sata: sata_dwc_error_intr SCR_ERROR=0x00020000 intpr=0x00000088 status=0x000000d0 dma_intp=187 pending=2 issued=1
[ 497.620823] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2
More information about the Linuxppc-dev
mailing list