[PATCH V13 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe
Wei Yang
weiyang at linux.vnet.ibm.com
Thu Mar 12 12:15:17 AEDT 2015
On Wed, Mar 11, 2015 at 08:55:07AM -0500, Bjorn Helgaas wrote:
>On Wed, Mar 04, 2015 at 01:19:07PM +0800, Wei Yang wrote:
>> On PHB3, PF IOV BAR will be covered by M64 window to have better PE
>> isolation. The total_pe number is usually different from total_VFs, which
>> can lead to a conflict between MMIO space and the PE number.
>>
>> For example, if total_VFs is 128 and total_pe is 256, the second half of
>> M64 window will be part of other PCI device, which may already belong
>> to other PEs.
>>
>> Prevent the conflict by reserving additional space for the PF IOV BAR,
>> which is total_pe number of VF's BAR size.
>>
>> [bhelgaas: make dev_printk() output more consistent, index resource[]
>> conventionally]
>> Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
>> ---
>> arch/powerpc/include/asm/machdep.h | 4 ++
>> arch/powerpc/include/asm/pci-bridge.h | 3 ++
>> arch/powerpc/kernel/pci-common.c | 5 +++
>> arch/powerpc/kernel/pci-hotplug.c | 4 ++
>> arch/powerpc/platforms/powernv/pci-ioda.c | 61 +++++++++++++++++++++++++++++
>> 5 files changed, 77 insertions(+)
>>
>> diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
>> index c8175a3..965547c 100644
>> --- a/arch/powerpc/include/asm/machdep.h
>> +++ b/arch/powerpc/include/asm/machdep.h
>> @@ -250,6 +250,10 @@ struct machdep_calls {
>> /* Reset the secondary bus of bridge */
>> void (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
>>
>> +#ifdef CONFIG_PCI_IOV
>> + void (*pcibios_fixup_sriov)(struct pci_bus *bus);
>> +#endif /* CONFIG_PCI_IOV */
>> +
>> /* Called to shutdown machine specific hardware not already controlled
>> * by other drivers.
>> */
>> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
>> index 513f8f2..de11de7 100644
>> --- a/arch/powerpc/include/asm/pci-bridge.h
>> +++ b/arch/powerpc/include/asm/pci-bridge.h
>> @@ -175,6 +175,9 @@ struct pci_dn {
>> #define IODA_INVALID_PE (-1)
>> #ifdef CONFIG_PPC_POWERNV
>> int pe_number;
>> +#ifdef CONFIG_PCI_IOV
>> + u16 max_vfs; /* number of VFs IOV BAR expended */
>> +#endif /* CONFIG_PCI_IOV */
>> #endif
>> struct list_head child_list;
>> struct list_head list;
>> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
>> index 8203101..022e9fe 100644
>> --- a/arch/powerpc/kernel/pci-common.c
>> +++ b/arch/powerpc/kernel/pci-common.c
>> @@ -1646,6 +1646,11 @@ void pcibios_scan_phb(struct pci_controller *hose)
>> if (ppc_md.pcibios_fixup_phb)
>> ppc_md.pcibios_fixup_phb(hose);
>>
>> +#ifdef CONFIG_PCI_IOV
>> + if (ppc_md.pcibios_fixup_sriov)
>> + ppc_md.pcibios_fixup_sriov(bus);
>> +#endif /* CONFIG_PCI_IOV */
>
>Here, and ...
>
>> +
>> /* Configure PCI Express settings */
>> if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
>> struct pci_bus *child;
>> diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
>> index 5b78917..7d238ae 100644
>> --- a/arch/powerpc/kernel/pci-hotplug.c
>> +++ b/arch/powerpc/kernel/pci-hotplug.c
>> @@ -94,6 +94,10 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
>> */
>> slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
>> pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
>> +#ifdef CONFIG_PCI_IOV
>> + if (ppc_md.pcibios_fixup_sriov)
>> + ppc_md.pcibios_fixup_sriov(bus);
>> +#endif /* CONFIG_PCI_IOV */
>
>here, you have the same code. It's good that we now do it for hot-added
>devices as well as those present at boot. But it's bad that it happens in
>two different paths.
>
>Isn't there some way we can unify this so the same path is used for the
>initial pcibios_scan_phb() and also the hot-add case? Maybe call
>pcibios_fixup_sriov() from pcibios_add_device()?
>
This is a very good suggestion. I have changed this and works fine.
Thanks :-)
>> pcibios_setup_bus_devices(bus);
>> max = bus->busn_res.start;
>> for (pass = 0; pass < 2; pass++) {
>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>> index 1b37066..958c7a3 100644
>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>> @@ -1749,6 +1749,64 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
>> static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
>> #endif /* CONFIG_PCI_MSI */
>>
>> +#ifdef CONFIG_PCI_IOV
>> +static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
>> +{
>> + struct pci_controller *hose;
>> + struct pnv_phb *phb;
>> + struct resource *res;
>> + int i;
>> + resource_size_t size;
>> + struct pci_dn *pdn;
>> +
>> + if (!pdev->is_physfn || pdev->is_added)
>> + return;
>> +
>> + hose = pci_bus_to_host(pdev->bus);
>> + phb = hose->private_data;
>> +
>> + pdn = pci_get_pdn(pdev);
>> + pdn->max_vfs = 0;
>> +
>> + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
>> + res = &pdev->resource[i + PCI_IOV_RESOURCES];
>> + if (!res->flags || res->parent)
>> + continue;
>> + if (!pnv_pci_is_mem_pref_64(res->flags)) {
>> + dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
>> + i, res);
>> + continue;
>> + }
>> +
>> + dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
>> + size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
>> + res->end = res->start + size * phb->ioda.total_pe - 1;
>> + dev_dbg(&pdev->dev, " %pR\n", res);
>> + dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)",
>> + i, res, phb->ioda.total_pe);
>> + }
>> + pdn->max_vfs = phb->ioda.total_pe;
>> +}
>> +
>> +static void pnv_pci_ioda_fixup_sriov(struct pci_bus *bus)
>> +{
>> + struct pci_dev *pdev;
>> + struct pci_bus *b;
>> +
>> + list_for_each_entry(pdev, &bus->devices, bus_list) {
>> + b = pdev->subordinate;
>> +
>> + if (b)
>> + pnv_pci_ioda_fixup_sriov(b);
>> +
>> + if (pdev->is_added)
>> + continue;
>> +
>> + pnv_pci_ioda_fixup_iov_resources(pdev);
>> + }
>> +}
>> +#endif /* CONFIG_PCI_IOV */
>> +
>> /*
>> * This function is supposed to be called on basis of PE from top
>> * to bottom style. So the the I/O or MMIO segment assigned to
>> @@ -2125,6 +2183,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>> ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
>> ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
>> ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
>> +#ifdef CONFIG_PCI_IOV
>> + ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_sriov;
>> +#endif /* CONFIG_PCI_IOV */
>> pci_add_flags(PCI_REASSIGN_ALL_RSRC);
>>
>> /* Reset IODA tables to a clean state */
>> --
>> 1.7.9.5
>>
--
Richard Yang
Help you, Help me
More information about the Linuxppc-dev
mailing list