[PATCH V13 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe
Bjorn Helgaas
bhelgaas at google.com
Thu Mar 12 00:55:07 AEDT 2015
On Wed, Mar 04, 2015 at 01:19:07PM +0800, Wei Yang wrote:
> On PHB3, PF IOV BAR will be covered by M64 window to have better PE
> isolation. The total_pe number is usually different from total_VFs, which
> can lead to a conflict between MMIO space and the PE number.
>
> For example, if total_VFs is 128 and total_pe is 256, the second half of
> M64 window will be part of other PCI device, which may already belong
> to other PEs.
>
> Prevent the conflict by reserving additional space for the PF IOV BAR,
> which is total_pe number of VF's BAR size.
>
> [bhelgaas: make dev_printk() output more consistent, index resource[]
> conventionally]
> Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/machdep.h | 4 ++
> arch/powerpc/include/asm/pci-bridge.h | 3 ++
> arch/powerpc/kernel/pci-common.c | 5 +++
> arch/powerpc/kernel/pci-hotplug.c | 4 ++
> arch/powerpc/platforms/powernv/pci-ioda.c | 61 +++++++++++++++++++++++++++++
> 5 files changed, 77 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
> index c8175a3..965547c 100644
> --- a/arch/powerpc/include/asm/machdep.h
> +++ b/arch/powerpc/include/asm/machdep.h
> @@ -250,6 +250,10 @@ struct machdep_calls {
> /* Reset the secondary bus of bridge */
> void (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
>
> +#ifdef CONFIG_PCI_IOV
> + void (*pcibios_fixup_sriov)(struct pci_bus *bus);
> +#endif /* CONFIG_PCI_IOV */
> +
> /* Called to shutdown machine specific hardware not already controlled
> * by other drivers.
> */
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 513f8f2..de11de7 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -175,6 +175,9 @@ struct pci_dn {
> #define IODA_INVALID_PE (-1)
> #ifdef CONFIG_PPC_POWERNV
> int pe_number;
> +#ifdef CONFIG_PCI_IOV
> + u16 max_vfs; /* number of VFs IOV BAR expended */
> +#endif /* CONFIG_PCI_IOV */
> #endif
> struct list_head child_list;
> struct list_head list;
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 8203101..022e9fe 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1646,6 +1646,11 @@ void pcibios_scan_phb(struct pci_controller *hose)
> if (ppc_md.pcibios_fixup_phb)
> ppc_md.pcibios_fixup_phb(hose);
>
> +#ifdef CONFIG_PCI_IOV
> + if (ppc_md.pcibios_fixup_sriov)
> + ppc_md.pcibios_fixup_sriov(bus);
> +#endif /* CONFIG_PCI_IOV */
Here, and ...
> +
> /* Configure PCI Express settings */
> if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> struct pci_bus *child;
> diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
> index 5b78917..7d238ae 100644
> --- a/arch/powerpc/kernel/pci-hotplug.c
> +++ b/arch/powerpc/kernel/pci-hotplug.c
> @@ -94,6 +94,10 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
> */
> slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
> pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
> +#ifdef CONFIG_PCI_IOV
> + if (ppc_md.pcibios_fixup_sriov)
> + ppc_md.pcibios_fixup_sriov(bus);
> +#endif /* CONFIG_PCI_IOV */
here, you have the same code. It's good that we now do it for hot-added
devices as well as those present at boot. But it's bad that it happens in
two different paths.
Isn't there some way we can unify this so the same path is used for the
initial pcibios_scan_phb() and also the hot-add case? Maybe call
pcibios_fixup_sriov() from pcibios_add_device()?
> pcibios_setup_bus_devices(bus);
> max = bus->busn_res.start;
> for (pass = 0; pass < 2; pass++) {
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 1b37066..958c7a3 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1749,6 +1749,64 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
> static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
> #endif /* CONFIG_PCI_MSI */
>
> +#ifdef CONFIG_PCI_IOV
> +static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
> +{
> + struct pci_controller *hose;
> + struct pnv_phb *phb;
> + struct resource *res;
> + int i;
> + resource_size_t size;
> + struct pci_dn *pdn;
> +
> + if (!pdev->is_physfn || pdev->is_added)
> + return;
> +
> + hose = pci_bus_to_host(pdev->bus);
> + phb = hose->private_data;
> +
> + pdn = pci_get_pdn(pdev);
> + pdn->max_vfs = 0;
> +
> + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
> + res = &pdev->resource[i + PCI_IOV_RESOURCES];
> + if (!res->flags || res->parent)
> + continue;
> + if (!pnv_pci_is_mem_pref_64(res->flags)) {
> + dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
> + i, res);
> + continue;
> + }
> +
> + dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
> + size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
> + res->end = res->start + size * phb->ioda.total_pe - 1;
> + dev_dbg(&pdev->dev, " %pR\n", res);
> + dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)",
> + i, res, phb->ioda.total_pe);
> + }
> + pdn->max_vfs = phb->ioda.total_pe;
> +}
> +
> +static void pnv_pci_ioda_fixup_sriov(struct pci_bus *bus)
> +{
> + struct pci_dev *pdev;
> + struct pci_bus *b;
> +
> + list_for_each_entry(pdev, &bus->devices, bus_list) {
> + b = pdev->subordinate;
> +
> + if (b)
> + pnv_pci_ioda_fixup_sriov(b);
> +
> + if (pdev->is_added)
> + continue;
> +
> + pnv_pci_ioda_fixup_iov_resources(pdev);
> + }
> +}
> +#endif /* CONFIG_PCI_IOV */
> +
> /*
> * This function is supposed to be called on basis of PE from top
> * to bottom style. So the the I/O or MMIO segment assigned to
> @@ -2125,6 +2183,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
> ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
> ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
> ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
> +#ifdef CONFIG_PCI_IOV
> + ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_sriov;
> +#endif /* CONFIG_PCI_IOV */
> pci_add_flags(PCI_REASSIGN_ALL_RSRC);
>
> /* Reset IODA tables to a clean state */
> --
> 1.7.9.5
>
More information about the Linuxppc-dev
mailing list