[PATCH 0/2] crypto: talitos: Add AES-XTS mode

[Horia Geantă]

On 2/20/2015 7:00 PM, Martin Hicks wrote:
> This adds the AES-XTS mode, supported by the Freescale SEC 3.3.2.
> 
> One of the nice things about this hardware is that it knows how to deal
> with encrypt/decrypt requests that are larger than sector size, but that 
> also requires that that the sector size be passed into the crypto engine
> as an XTS cipher context parameter.
> 
> When a request is larger than the sector size the sector number is
> incremented by the talitos engine and the tweak key is re-calculated
> for the new sector.
> 
> I've tested this with 256bit and 512bit keys (tweak and data keys of 128bit
> and 256bit) to ensure interoperability with the software AES-XTS
> implementation.  All testing was done using dm-crypt/LUKS with
> aes-xts-plain64.
> 
> Is there a better solution that just hard coding the sector size to
> (1<<SECTOR_SHIFT)?  Maybe dm-crypt should be modified to pass the
> sector size along with the plain/plain64 IV to an XTS algorithm?

AFAICT, SW implementation of xts mode in kernel (crypto/xts.c) is not
aware of a sector size ("data unit size" in IEEE P1619 terminology):
There's a hidden assumption that all the data send to xts in one request
belongs to a single sector. Even more, it's supposed that the first
16-byte block in the request is "block 0" in the sector. These can be
seen from the way the tweak ("T") value is computed.
(Side note: there's no support of ciphertext stealing in crypto/xts.c -
i.e. sector sizes must be a multiple of underlying block cipher size -
that is 16B.)

If dm-crypt would be modified to pass sector size somehow, all in-kernel
xts implementations would have to be made aware of the change.
I have nothing against this, but let's see what crypto maintainers have
to say...

BTW, there were some discussions back in 2013 wrt. being able to
configure / increase sector size, smth. crypto engines would benefit from:
http://www.saout.de/pipermail/dm-crypt/2013-January/003125.html
(experimental patch)
http://www.saout.de/pipermail/dm-crypt/2013-March/003202.html

The experimental patch sends sector size as the req->nbytes - hidden
assumption: data size sent in an xts crypto request equals a sector.

I am not sure if there was a follow-up though...
Adding Milan - maybe he could shed some light.

Thanks,
Horia

> 
> Martin Hicks (2):
>   crypto: talitos: Clean ups and comment fixes for ablkcipher commands
>   crypto: talitos: Add AES-XTS Support
> 
>  drivers/crypto/talitos.c |   45 +++++++++++++++++++++++++++++++++++++--------
>  drivers/crypto/talitos.h |    1 +
>  2 files changed, 38 insertions(+), 8 deletions(-)
>