[PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

Scott Wood scottwood at freescale.com
Sat Apr 11 08:40:46 AEST 2015


On Fri, 2015-04-10 at 01:23 -0500, Jia Hongtao-B38951 wrote:
> 
> 
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Friday, April 10, 2015 11:56 AM
> > To: Jia Hongtao-B38951
> > Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org;
> > robh+dt at kernel.org; rui.zhang at intel.com
> > Subject: Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ
> > T104x
> > 
> > On Tue, 2015-03-31 at 14:17 +0800, Jia Hongtao wrote:
> > > This is Thermal Monitoring Unit for QorIQ platform.
> > >
> > > Signed-off-by: Jia Hongtao <hongtao.jia at freescale.com>
> > > ---
> > >  .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58
> > +++++++++++++++
> > >  arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82
> > ++++++++++++++++++++++
> > >  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
> > >  3 files changed, 141 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > >  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > new file mode 100644
> > > index 0000000..dfc17fa
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > @@ -0,0 +1,58 @@
> > > +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
> > > +
> > > +Required properties:
> > > +- compatible : "fsl,qoriq-tmu".
> > 
> > compatible: Must include "fsl,qoriq-tmu". The version of the device is
> > 	    determined by the TMU IP Block Revision Register (IPBRR0)
> > 	    at offset 0x0BF8.
> > 
> > 	    Table of correspondences between IPBRR0 values and example
> > 	    chips:
> > 		Value           Device
> > 		-----------     -------
> > 		0x01900102      T1040
> 
> I will update it in next version.
> 
> > 
> > > +- reg : address range of TMU registers.
> > > +- interrupts : should contain the interrupt for TMU.
> > 
> > s/should contain/contains/
> 
> Thanks for the correction.
> 
> > 
> > > +- calibration : calibration table for TMU.
> > 
> > What is the format of the calibration table, and where does one get the
> > data?
> 
> There are four calibration config range, for each range we got a couple of
> pairs formatted like <TTCFGR, TSCFGR> at offset of <0x0080, 0x0084>.

The binding document needs to explain this, in more detail, as well as
how one determines the data.

Is this configuration or hardware description?

-Scott




More information about the Linuxppc-dev mailing list