[PATCH v2] mtd: m25p80: Add Power Management support

[Brian Norris]

On Thu, Dec 12, 2013 at 01:38:36PM +0800, Hou Zhiqiang wrote:
> Add PM support using callback function suspend and resume in
> .driver.pm of spi_driver.
> 
> Signed-off-by: Hou Zhiqiang <b48286 at freescale.com>
> ---
> v2:
>  - Replace .driver.suspend and .driver.resume with .driver.pm
>  - Use CONFIG_PM_SLEEP instead of CONFIG_PM

Just noticed v2... My v1 comments still apply.

> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -1128,11 +1130,46 @@ static int m25p_remove(struct spi_device *spi)
...
> +static const struct dev_pm_ops m25p_pm = {
> +	SET_SYSTEM_SLEEP_PM_OPS(m25p_suspend, m25p_resume)
> +};

This could just be:

static SIMPLE_DEV_PM_OPS(m25p_pm_ops, m25p_suspend, m25p_resume);

>  
>  static struct spi_driver m25p80_driver = {
>  	.driver = {
>  		.name	= "m25p80",
>  		.owner	= THIS_MODULE,
> +		.pm	= &m25p_pm,
>  	},
>  	.id_table	= m25p_ids,
>  	.probe	= m25p_probe,

Brian