[PATCH RFC] power/mpc85xx: Add delay after enabling I2C master

York Sun yorksun at freescale.com
Tue May 14 07:27:08 EST 2013


Erratum A-006037 indicates I2C controller executes the write to I2CCR only
after it sees SCL idle for 64K cycle of internal I2C controller clocks. If
during this waiting period, I2C controller is disabled (I2CCR[MEN] set to
0), then the controller could end in bad state, and hang the future access
to I2C register.

The mpc_i2c_fixup() function tries to recover the bus from a stalled state
where the 9th clock pulse wasn't generated. However, this workaround
disables and enables I2C controller without meeting waiting requirement of
this erratum.

This erratum applies to some 85xx SoCs. It is safe to apply to all of them
for mpc_i2c_fixup().

Signed-off-by: York Sun <yorksun at freescale.com>
---
I'd like to get rid of the #ifdef if mpc5121 is OK with the longer delay.

 drivers/i2c/busses/i2c-mpc.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a69459e..3e540ca 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -105,7 +105,12 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
 	int k;
-	u32 delay_val = 1000000 / i2c->real_clk + 1;
+	u32 delay_val;
+#ifdef CONFIG_PPC_85xx
+	delay_val = 65536 / (fsl_get_sys_freq() / 2000000);	/* 64K cycle */
+#else
+	delay_val = 1000000 / i2c->real_clk + 1;
+#endif
 
 	if (delay_val < 2)
 		delay_val = 2;
@@ -115,7 +120,11 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
 		udelay(delay_val);
 		writeccr(i2c, CCR_MEN);
+#ifdef CONFIG_PPC_85xx
+		udelay(delay_val);
+#else
 		udelay(delay_val << 1);
+#endif
 	}
 }
 
-- 
1.7.9.5




More information about the Linuxppc-dev mailing list