[PATCH v3] clk: add PowerPC corenet clock driver support
Mike Turquette
mturquette at linaro.org
Tue May 14 05:25:13 EST 2013
Quoting Yuantian.Tang at freescale.com (2013-04-09 01:46:26)
> From: Tang Yuantian <yuantian.tang at freescale.com>
>
> This adds the clock driver for Freescale PowerPC corenet
> series SoCs using common clock infrastructure.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>
Patch #1 looks good to me. I've taken it into clk-next for now, but by
aware that I'll be rebasing that branch until at least -rc3 comes out,
so don't use it for a stable branch.
I did not take in patch #2, I guess you'll send that through a PPC tree?
Regards,
Mike
> ---
> v3:
> - remove the module author and description
> v2:
> - add the document for device tree clock bindings
>
> arch/powerpc/platforms/Kconfig.cputype | 1 +
> drivers/clk/Kconfig | 7 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ppc-corenet.c | 280 +++++++++++++++++++++++++++++++++
> 4 files changed, 289 insertions(+)
> create mode 100644 drivers/clk/clk-ppc-corenet.c
>
> diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
> index 18e3b76..cf065b8 100644
> --- a/arch/powerpc/platforms/Kconfig.cputype
> +++ b/arch/powerpc/platforms/Kconfig.cputype
> @@ -158,6 +158,7 @@ config E500
> config PPC_E500MC
> bool "e500mc Support"
> select PPC_FPU
> + select COMMON_CLK
> depends on E500
> help
> This must be enabled for running on e500mc (and derivatives
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index a47e6ee..6e2fd9c 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -63,6 +63,13 @@ config CLK_TWL6040
> McPDM. McPDM module is using the external bit clock on the McPDM bus
> as functional clock.
>
> +config CLK_PPC_CORENET
> + bool "Clock driver for PowerPC corenet platforms"
> + depends on PPC_E500MC && OF
> + ---help---
> + This adds the clock driver support for Freescale PowerPC corenet
> + platforms using common clock framework.
> +
> endmenu
>
> source "drivers/clk/mvebu/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 300d477..6720319 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -34,3 +34,4 @@ obj-$(CONFIG_X86) += x86/
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
> obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
> +obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
> diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-ppc-corenet.c
> new file mode 100644
> index 0000000..a2d483f
> --- /dev/null
> +++ b/drivers/clk/clk-ppc-corenet.c
> @@ -0,0 +1,280 @@
> +/*
> + * Copyright 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * clock driver for Freescale PowerPC corenet SoCs.
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +
> +struct cmux_clk {
> + struct clk_hw hw;
> + void __iomem *reg;
> + u32 flags;
> +};
> +
> +#define PLL_KILL BIT(31)
> +#define CLKSEL_SHIFT 27
> +#define CLKSEL_ADJUST BIT(0)
> +#define to_cmux_clk(p) container_of(p, struct cmux_clk, hw)
> +
> +static void __iomem *base;
> +static unsigned int clocks_per_pll;
> +
> +static int cmux_set_parent(struct clk_hw *hw, u8 idx)
> +{
> + struct cmux_clk *clk = to_cmux_clk(hw);
> + u32 clksel;
> +
> + clksel = ((idx / clocks_per_pll) << 2) + idx % clocks_per_pll;
> + if (clk->flags & CLKSEL_ADJUST)
> + clksel += 8;
> + clksel = (clksel & 0xf) << CLKSEL_SHIFT;
> + iowrite32be(clksel, clk->reg);
> +
> + return 0;
> +}
> +
> +static u8 cmux_get_parent(struct clk_hw *hw)
> +{
> + struct cmux_clk *clk = to_cmux_clk(hw);
> + u32 clksel;
> +
> + clksel = ioread32be(clk->reg);
> + clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
> + if (clk->flags & CLKSEL_ADJUST)
> + clksel -= 8;
> + clksel = (clksel >> 2) * clocks_per_pll + clksel % 4;
> +
> + return clksel;
> +}
> +
> +const struct clk_ops cmux_ops = {
> + .get_parent = cmux_get_parent,
> + .set_parent = cmux_set_parent,
> +};
> +
> +static void __init core_mux_init(struct device_node *np)
> +{
> + struct clk *clk;
> + struct clk_init_data init;
> + struct cmux_clk *cmux_clk;
> + struct device_node *node;
> + int rc, count, i;
> + u32 offset;
> + const char *clk_name;
> + const char **parent_names;
> +
> + rc = of_property_read_u32(np, "reg", &offset);
> + if (rc) {
> + pr_err("%s: could not get reg property\n", np->name);
> + return;
> + }
> +
> + /* get the input clock source count */
> + count = of_property_count_strings(np, "clock-names");
> + if (count < 0) {
> + pr_err("%s: get clock count error\n", np->name);
> + return;
> + }
> + parent_names = kzalloc((sizeof(char *) * count), GFP_KERNEL);
> + if (!parent_names) {
> + pr_err("%s: could not allocate parent_names\n", __func__);
> + return;
> + }
> +
> + for (i = 0; i < count; i++)
> + parent_names[i] = of_clk_get_parent_name(np, i);
> +
> + cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);
> + if (!cmux_clk) {
> + pr_err("%s: could not allocate cmux_clk\n", __func__);
> + goto err_name;
> + }
> + cmux_clk->reg = base + offset;
> +
> + node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
> + if (node && (offset >= 0x80))
> + cmux_clk->flags = CLKSEL_ADJUST;
> +
> + rc = of_property_read_string_index(np, "clock-output-names",
> + 0, &clk_name);
> + if (rc) {
> + pr_err("%s: read clock names error\n", np->name);
> + goto err_clk;
> + }
> +
> + init.name = clk_name;
> + init.ops = &cmux_ops;
> + init.parent_names = parent_names;
> + init.num_parents = count;
> + init.flags = 0;
> + cmux_clk->hw.init = &init;
> +
> + clk = clk_register(NULL, &cmux_clk->hw);
> + if (IS_ERR(clk)) {
> + pr_err("%s: could not register clock\n", clk_name);
> + goto err_clk;
> + }
> +
> + rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> + if (rc) {
> + pr_err("Could not register clock provider for node:%s\n",
> + np->name);
> + goto err_clk;
> + }
> + goto err_name;
> +
> +err_clk:
> + kfree(cmux_clk);
> +err_name:
> + /* free *_names because they are reallocated when registered */
> + kfree(parent_names);
> +}
> +
> +static void __init core_pll_init(struct device_node *np)
> +{
> + u32 offset, mult;
> + int i, rc, count;
> + const char *clk_name, *parent_name;
> + struct clk_onecell_data *onecell_data;
> + struct clk **subclks;
> +
> + rc = of_property_read_u32(np, "reg", &offset);
> + if (rc) {
> + pr_err("%s: could not get reg property\n", np->name);
> + return;
> + }
> +
> + /* get the multiple of PLL */
> + mult = ioread32be(base + offset);
> +
> + /* check if this PLL is disabled */
> + if (mult & PLL_KILL) {
> + pr_debug("PLL:%s is disabled\n", np->name);
> + return;
> + }
> + mult = (mult >> 1) & 0x3f;
> +
> + parent_name = of_clk_get_parent_name(np, 0);
> + if (!parent_name) {
> + pr_err("PLL: %s must have a parent\n", np->name);
> + return;
> + }
> +
> + count = of_property_count_strings(np, "clock-output-names");
> + if (count < 0 || count > 4) {
> + pr_err("%s: clock is not supported\n", np->name);
> + return;
> + }
> +
> + /* output clock number per PLL */
> + clocks_per_pll = count;
> +
> + subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
> + if (!subclks) {
> + pr_err("%s: could not allocate subclks\n", __func__);
> + return;
> + }
> +
> + onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
> + if (!onecell_data) {
> + pr_err("%s: could not allocate onecell_data\n", __func__);
> + goto err_clks;
> + }
> +
> + for (i = 0; i < count; i++) {
> + rc = of_property_read_string_index(np, "clock-output-names",
> + i, &clk_name);
> + if (rc) {
> + pr_err("%s: could not get clock names\n", np->name);
> + goto err_cell;
> + }
> +
> + /*
> + * when count == 4, there are 4 output clocks:
> + * /1, /2, /3, /4 respectively
> + * when count < 4, there are at least 2 output clocks:
> + * /1, /2, (/4, if count == 3) respectively.
> + */
> + if (count == 4)
> + subclks[i] = clk_register_fixed_factor(NULL, clk_name,
> + parent_name, 0, mult, 1 + i);
> + else
> +
> + subclks[i] = clk_register_fixed_factor(NULL, clk_name,
> + parent_name, 0, mult, 1 << i);
> +
> + if (IS_ERR(subclks[i])) {
> + pr_err("%s: could not register clock\n", clk_name);
> + goto err_cell;
> + }
> + }
> +
> + onecell_data->clks = subclks;
> + onecell_data->clk_num = count;
> +
> + rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
> + if (rc) {
> + pr_err("Could not register clk provider for node:%s\n",
> + np->name);
> + goto err_cell;
> + }
> +
> + return;
> +err_cell:
> + kfree(onecell_data);
> +err_clks:
> + kfree(subclks);
> +}
> +
> +static const struct of_device_id clk_match[] __initconst = {
> + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> + { .compatible = "fsl,core-pll-clock", .data = core_pll_init, },
> + { .compatible = "fsl,core-mux-clock", .data = core_mux_init, },
> + {}
> +};
> +
> +static int __init ppc_corenet_clk_probe(struct platform_device *pdev)
> +{
> + struct device_node *np;
> +
> + np = pdev->dev.of_node;
> + base = of_iomap(np, 0);
> + if (!base) {
> + dev_err(&pdev->dev, "iomap error\n");
> + return -ENOMEM;
> + }
> + of_clk_init(clk_match);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ppc_clk_ids[] __initconst = {
> + { .compatible = "fsl,qoriq-clockgen-1.0", },
> + { .compatible = "fsl,qoriq-clockgen-2", },
> + {}
> +};
> +
> +static struct platform_driver ppc_corenet_clk_driver = {
> + .driver = {
> + .name = "ppc_corenet_clock",
> + .owner = THIS_MODULE,
> + .of_match_table = ppc_clk_ids,
> + },
> + .probe = ppc_corenet_clk_probe,
> +};
> +
> +static int __init ppc_corenet_clk_init(void)
> +{
> + return platform_driver_register(&ppc_corenet_clk_driver);
> +}
> +subsys_initcall(ppc_corenet_clk_init);
> --
> 1.8.0
More information about the Linuxppc-dev
mailing list