[PATCH 4/11] Add platform_has_feature()

[Michael Ellerman]

On Tue, Mar 19, 2013 at 01:15:02PM -0500, Nathan Fontenot wrote:
> On 03/14/2013 08:42 AM, Michael Ellerman wrote:
> > On Fri, Mar 08, 2013 at 10:02:31PM -0600, Nathan Fontenot wrote:
> >> The firmware_has_feature() function makes it easy to check for supported
> >> features of the hardware. There is not corresponding function to check for
> >> features supported by the client architecture.
> > 
> > Actually it doesn't tell you about features of the hardware, it tells
> > you about features of the firmware, or the platform ..
> > 
> > So I think you should really just be adding a new firmware feature flag,
> > and adding whatever glue code is required to set it based on what you
> > find in the device tree.
> > 
> > Also notice where you end up using it:
> > 
> > -       if (firmware_has_feature(FW_FEATURE_OPAL))
> > +       if (firmware_has_feature(FW_FEATURE_OPAL) ||
> > +           platform_has_feature(OV5_TYPE1_AFFINITY)) {
> > +               dbg("Using form 1 affinity\n");
> > 		form1_affinity = 1;
> > 
> > Could be:
> > 
> > +       if (firmware_has_feature(FW_FEATURE_FORM1_AFFINITY) ||
> > 
> 
> To make sure I understand what you're suggesting...
> 
> You think there should be a single firmware_has_feature() for all current
> uses and also for checking items such as FORM1_AFFINITY and PRRN 
> features as reported by the device tree for vector 5 portions of the
> client architecture bits. I think this could be done by checking the
> device tree ibm,architecture-vec-5 node for a specified feature and
> setting a bit the appropriate bit in powerpc_firmware_features.

Yes that's right.

So you'd add a new FW_FEATURE_FORM1_AFFINITY, and set it depending on what
you find in "ibm,architecture-vec-5" on IBM pseries machines.

As a cleanup you'd also set it unconditionally on OPAL and then the
check above could be simply for FW_FEATURE_FORM1_AFFINITY.

cheers