[PATCH v3 2/3] powerpc/85xx: Add silicon device tree for C293

[Scott Wood]

On 07/30/2013 03:49:22 AM, Po Liu wrote:
> From: Mingkai Hu <Mingkai.Hu at freescale.com>
> 
> Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> Signed-off-by: Po Liu <Po.Liu at freescale.com>
> ---
> Changes for v2:
> 	- None
> Changes for v3:
> 	- None
> 
>  arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 193  
> +++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/fsl/c293si-pre.dtsi  |  63 ++++++++++
>  2 files changed, 256 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/c293si-post.dtsi
>  create mode 100644 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
> 
> diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi  
> b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
> new file mode 100644
> index 0000000..bd20832
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
> @@ -0,0 +1,193 @@
> +/*
> + * C293 Silicon/SoC Device Tree Source (post include)
> + *
> + * Copyright 2012 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following  
> conditions are met:
> + *     * Redistributions of source code must retain the above  
> copyright
> + *       notice, this list of conditions and the following  
> disclaimer.
> + *     * Redistributions in binary form must reproduce the above  
> copyright
> + *       notice, this list of conditions and the following  
> disclaimer in the
> + *       documentation and/or other materials provided with the  
> distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote  
> products
> + *       derived from this software without specific prior written  
> permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms  
> of the
> + * GNU General Public License ("GPL") as published by the Free  
> Software
> + * Foundation, either version 2 of that License or (at your option)  
> any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS''  
> AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  
> IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
> PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE  
> FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
> CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
> OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
> CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT  
> LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE  
> USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +&ifc {
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	compatible = "fsl,ifc", "simple-bus";
> +	interrupts = <19 2 0 0>;
> +};
> +
> +/* controller at 0xa000 */
> +&pci0 {
> +	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
> +	device_type = "pci";
> +	#size-cells = <2>;
> +	#address-cells = <3>;
> +	bus-range = <0 255>;
> +	clock-frequency = <33333333>;
> +	interrupts = <16 2 0 0>;

Remove clock-frequency (surely PCIe is not running at 33 MHz).

> +	crypto at 80000 {
> +/include/ "qoriq-sec6.0-0.dtsi"
> +	};
> +
> +	crypto at 80000 {
> +		reg = <0x80000 0x20000>;
> +		ranges = <0x0 0x80000 0x20000>;
> +
> +		jr at 1000{
> +			interrupts = <45 2 0 0>;
> +		};
> +		jr at 2000{
> +			interrupts = <57 2 0 0>;
> +		};
> +	};

Do these inline the way the example shows.

-Scott