[PATCH v2 3/3] powerpc/85xx: Add C293PCIE board support
Po Liu
Po.Liu at freescale.com
Fri Jul 26 12:41:19 EST 2013
From: Mingkai Hu <Mingkai.Hu at freescale.com>
C293PCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module.
- 512KB platform SRAM in addition to 512K L2 Cache/SRAM
- 512MB soldered DDR3 32bit memory
- CPLD System Logic
- 64MB x16 NOR flash and 4GB x8 NAND flash
- 16MB SPI flash
Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Po Liu <Po.Liu at freescale.com>
---
Changes for v2:
- Remove the JFFS2 partitions in NOR/NAND/SPI flash;
- Implement the NAND partitions;
- Remove the no use descriptions for cpld node;
- Add mpc85xx_smp_defconfig and mpc85xx_defconfig for C293;
- Remove the no use includes in c293pcie.c
arch/powerpc/boot/dts/c293pcie.dts | 243 +++++++++++++++++++++++++++++
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/configs/mpc85xx_smp_defconfig | 1 +
arch/powerpc/platforms/85xx/Kconfig | 6 +
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/c293pcie.c | 75 +++++++++
6 files changed, 327 insertions(+)
create mode 100644 arch/powerpc/boot/dts/c293pcie.dts
create mode 100644 arch/powerpc/platforms/85xx/c293pcie.c
diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts
new file mode 100644
index 0000000..dc91c47
--- /dev/null
+++ b/arch/powerpc/boot/dts/c293pcie.dts
@@ -0,0 +1,243 @@
+/*
+ * C293 PCIE Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/c293si-pre.dtsi"
+
+/ {
+ model = "fsl,C293PCIE";
+ compatible = "fsl,C293PCIE";
+
+ memory {
+ device_type = "memory";
+ };
+
+ ifc: ifc at fffe1e000 {
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+ 0x2 0x0 0xf 0xffdf0000 0x00010000>;
+
+ };
+
+ soc: soc at fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie at fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie at 0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+&ifc {
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition at 0 {
+ /* 1MB for DTB Image */
+ reg = <0x0 0x00100000>;
+ label = "NOR DTB Image";
+ };
+
+ partition at 100000 {
+ /* 8 MB for Linux Kernel Image */
+ reg = <0x00100000 0x00800000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition at 900000 {
+ /* 53MB for rootfs */
+ reg = <0x00900000 0x03500000>;
+ label = "NOR Rootfs Image";
+ };
+
+ partition at 3e00000 {
+ /* 1MB for blob encrypted key */
+ reg = <0x03e00000 0x00100000>;
+ label = "NOR blob encrypted key";
+ };
+
+ partition at 3f00000 {
+ /* 512KB for u-boot Bootloader Image and evn */
+ reg = <0x03f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand at 1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition at 0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition at 100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition at 200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition at 600000 {
+ /* 19MB for Compressed Root file System Image */
+ reg = <0x00600000 0x01300000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition at 1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+
+ partition at 2000000 {
+ /* 96MB for Root File System */
+ reg = <0x02000000 0x06000000>;
+ label = "NAND Root File System";
+ };
+
+ partition at 8000000 {
+ /* 3968MB for Others */
+ reg = <0x08000000 0xF8000000>;
+ label = "NAND Others";
+ };
+ };
+
+ cpld at 2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,c293pcie-cpld";
+ reg = <0x2 0x0 0x20>;
+ };
+};
+
+&soc {
+ i2c at 3000 {
+ eeprom at 50 {
+ compatible = "st,24c1024";
+ reg = <0x50>;
+ };
+
+ adt7461 at 4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+
+ spi at 7000 {
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition at 0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition at 100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition at 180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition at 580000 {
+ /* 10.5MB for Compressed RFS Image */
+ reg = <0x00580000 0x00a80000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+ };
+ };
+
+ mdio at 24000 {
+ phy0: ethernet-phy at 0 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ enet0: ethernet at b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet at b1000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+/include/ "fsl/c293si-post.dtsi"
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 5a58882..1592f8c 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -27,6 +27,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 152fa05..d6549ff 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -30,6 +30,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index efdd37c..42fc72a 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -32,6 +32,12 @@ config BSC9131_RDB
StarCore SC3850 DSP
Manufacturer : Freescale Semiconductor, Inc
+config C293_PCIE
+ bool "Freescale C293PCIE"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the C293PCIE board
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2eab37e..53c9f75 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-y += common.o
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_C293_PCIE) += c293pcie.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c
new file mode 100644
index 0000000..6208e49
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/c293pcie.c
@@ -0,0 +1,75 @@
+/*
+ * C293PCIE Board Setup
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+void __init c293_pcie_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+
+ mpic_init(mpic);
+}
+
+
+/*
+ * Setup the architecture
+ */
+static void __init c293_pcie_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("c293_pcie_setup_arch()", 0);
+
+ fsl_pci_assign_primary();
+
+ printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n");
+}
+
+machine_arch_initcall(c293_pcie, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init c293_pcie_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,C293PCIE"))
+ return 1;
+ return 0;
+}
+
+define_machine(c293_pcie) {
+ .name = "C293 PCIE",
+ .probe = c293_pcie_probe,
+ .setup_arch = c293_pcie_setup_arch,
+ .init_IRQ = c293_pcie_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.8.0
More information about the Linuxppc-dev
mailing list