[RFC] power/mpc85xx: Add delay after enabling I2C master

[York Sun]

On 07/23/2013 11:43 AM, Scott Wood wrote:
>>
>> Yes. The max divider from sys clock to i2c clcok is 32K.
>> i2c->real_clk is the clock I2C controller pumps out, not its internal
>> operation clock.
> 
> 32K is the max for all implementations?

Yes, according to application note 2919 (published).

> 
> BTW, Where does the "2000000" come from?  Shouldn't it be 1000000 if
> you're converting to usec?  If you're trying to add some slack, say so
> rather than having a comment suggest that the output of that formula is
> 64K cycles.  Or is there an implicit assumption that i2c runs at half
> the system frequency?  Is that assumption true for all implementations
> that have this erratum?

The clock source is half the sysclk. This erratum applies to selected
85xx SoCs. I have confirmed with application team that it is safe to
apply the delay to all 85xx.

> 
>> > In any case, you should send this patch to the i2c maintainer and list.
>> >
>>
>> I don't have the name on top of my head. Is that
>> linux-i2c at vger.kernel.org?
> 
> Yes, and Wolfram Sang <wsa at the-dreams.de> is the maintainer.  This is
> listed in the MAINTAINERS file.
> 

I can resubmit this patch after the feedback is addressed.

York