[PATCH 1/2] Powerpc: Add voltage support in dts file

[Haijun Zhang]

eSDHC of T4240 had 1.8v voltage support. Add this node to specify
eSDHC voltage capacity. If this node not specified eSDHC driver
still can read from eSDHC host capacity register.

Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
Signed-off-by: Anton Vorontsov <cbouatmailru at gmail.com>
---
changes for this patch set:
	- split from patch [PATCH 1/2] Powerpc: Add 
	- voltage ranges support for T4

 Documentation/devicetree/bindings/mmc/fsl-esdhc.txt | 3 +++
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi         | 1 +
 2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index bd9be0b..f1ac253 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -19,6 +19,8 @@ Optional properties:
     "bus-width = <1>" property.
   - sdhci,auto-cmd12: specifies that a controller can only handle auto
     CMD12.
+  - 3300 3300: specifies that eSDHC controller can support voltages ranges
+    from 3300 to 3300.
 
 Example:
 
@@ -29,4 +31,5 @@ sdhci at 2e000 {
 	interrupt-parent = <&ipic>;
 	/* Filled in by U-Boot */
 	clock-frequency = <0>;
+	voltage-ranges = <3300 3300>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index bd611a9..567d0fb 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -399,6 +399,7 @@
 	sdhc at 114000 {
 		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
 		sdhci,auto-cmd12;
+		voltage-ranges = <1800 1800>;
 	};
 /include/ "qoriq-i2c-0.dtsi"
 /include/ "qoriq-i2c-1.dtsi"
-- 
1.8.0