[PATCH 0/3] Enable multiple MSI feature in pSeries

[Mike Qiu]

> On Tue, 2013-01-15 at 15:38 +0800, Mike Qiu wrote:
>> Currently, multiple MSI feature hasn't been enabled in pSeries,
>> These patches try to enbale this feature.
> Hi Mike,
>
>> These patches have been tested by using ipr driver, and the driver patch
>> has been made by Wen Xiong <wenxiong at linux.vnet.ibm.com>:
> So who wrote these patches? Normally we would expect the original author
> to post the patches if at all possible.
Hi Michael

These Multiple MSI patches were wrote by myself, you know this feature 
has not enabled
and it need device driver to test whether it works suitable. So I test 
my patches use
Wen Xiong's ipr patches, which has been send out to the maillinglist.

I'm the**original author :)
>
>> [PATCH 0/7] Add support for new IBM SAS controllers
> I would like to see the full series, including the driver enablement.
Yep, but the driver patches were wrote by Wen Xiong and has been send out.
I just use her patches to test my patches. all device support Multiple MSI
can use my feature not only IBM SAS controllers, I also test my patches use
the broadcom wireless card tg3, and also works OK.
>
>> Test platform: One partition of pSeries with one cpu core(4 SMTs) and
>>                 RAID bus controller: IBM PCI-E IPR SAS Adapter (ASIC) in POWER7
>> OS version: SUSE Linux Enterprise Server 11 SP2  (ppc64) with 3.8-rc3 kernel
>>
>> IRQ 21 and 22 are assigned to the ipr device which support 2 mutiple MSI.
>>
>> The test results is shown by 'cat /proc/interrups':
>>            CPU0       CPU1       CPU2       CPU3
>> 21:          6          5          5          5      XICS Level     host1-0
>> 22:        817        814        816        813      XICS Level     host1-1
> This shows that you are correctly configuring two MSIs.
>
> But the key advantage of using multiple interrupts is to distribute load
> across CPUs and improve performance. So I would like to see some
> performance numbers that show that there is a real benefit for all the
> extra complexity in the code.
Yes, the system just has suport two MSIs. Anyway, I will try to do some 
proformance
test, to show the real benefit.
But actually it needs the driver to do so. As the data show above, it 
seems there is
some problems in use the interrupt, the irq 21 use few, most use 22, I 
will discuss
with the driver author to see why and if she fixed, I will give out the 
proformance
result.

Thanks

Mike

>
> cheers
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20130204/9c75162a/attachment-0001.html>