[PATCH v2 3/3] powerpc/85xx: add hardware automatically enter pw20 state

[Dongsheng Wang]

From: Wang Dongsheng <dongsheng.wang at freescale.com>

Using hardware features make core automatically enter PW20 state.
Set a TB count to hardware, the effective count begins when PW10
is entered. When the effective period has expired, the core will
proceed from PW10 to PW20 if no exit conditions have occurred during
the period.

Signed-off-by: Wang Dongsheng <dongsheng.wang at freescale.com>
---
Remove:
delete setup_idle_hw_governor function.
delete "Fix erratum" for rev1.

Move:
move setup_* into __setup/restore_cpu_e6500.

diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 8364bbe..e846495 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -219,6 +219,7 @@
 
 /* Bit definitions for PWRMGTCR0. */
 #define PWRMGTCR0_ALTIVEC_IDLE	(1 << 22) /* Altivec idle enable */
+#define PWRMGTCR0_PW20_WAIT	(1 << 14) /* PW20 state enable bit */
 
 /* Bit definitions for the MCSR. */
 #define MCSR_MCS	0x80000000 /* Machine Check Summary */
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 90bbb46..295ccb5 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -59,6 +59,7 @@ _GLOBAL(__setup_cpu_e6500)
 	bl	.setup_altivec_ivors
 #endif
 	bl	setup_altivec_idle
+	bl	setup_pw20_idle
 	bl	__setup_cpu_e5500
 	mtlr	r6
 	blr
@@ -121,6 +122,7 @@ _GLOBAL(__restore_cpu_e6500)
 	mflr	r5
 	bl	.setup_altivec_ivors
 	bl	setup_altivec_idle
+	bl	setup_pw20_idle
 	bl	__restore_cpu_e5500
 	mtlr	r5
 	blr
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 93b563b..cdd526e 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -15,12 +15,22 @@
 
 #define ALTIVEC_COUNT_OFFSET		16
 #define ALTIVEC_IDLE_COUNT_MASK		0x003f0000
+#define PW20_COUNT_OFFSET		8
+#define PW20_IDLE_COUNT_MASK		0x00003f00
 
 /*
  * FIXME - We don't know the AltiVec application scenarios.
  */
 #define ALTIVEC_IDLE_TIME_BIT	14 /* 1ms */
 
+/*
+ * FIXME - We don't know, what time should we let the core into PW20 state.
+ * because we don't know the current state of the cpu load. And threads are
+ * independent, so we can not know the state of different thread has been
+ * idle.
+ */
+#define PW20_IDLE_TIME_BIT	14 /* 1ms */
+
 static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
@@ -125,3 +135,25 @@ void setup_altivec_idle(void)
 
 	mtspr(SPRN_PWRMGTCR0, altivec_idle);
 }
+
+void setup_pw20_idle(void)
+{
+	u32 pw20_idle;
+
+	if (!has_pw20_altivec_idle())
+		return;
+
+	pw20_idle = mfspr(SPRN_PWRMGTCR0);
+
+	/* Set PW20_WAIT bit, Enable PW20 State */
+	pw20_idle |= PWRMGTCR0_PW20_WAIT;
+
+	/* Set Automatic PW20 Core Idle Count */
+	/* clear count */
+	pw20_idle &= ~PW20_IDLE_COUNT_MASK;
+
+	/* set count */
+	pw20_idle |= ((MAX_BIT - PW20_IDLE_TIME_BIT) << PW20_COUNT_OFFSET);
+
+	mtspr(SPRN_PWRMGTCR0, pw20_idle);
+}
-- 
1.8.0