[PATCH 2/4 V2] mmc: esdhc: workaround for dma err in the last system transaction

[Scott Wood]

On Mon, 2013-08-26 at 09:03 +0800, Zhang Haijun wrote:
> On 08/23/2013 11:40 PM, Scott Wood wrote:
> 
> > On Fri, 2013-08-23 at 14:39 +0800, Zhang Haijun wrote:
> > > Hi, Anton and all
> > > 
> > > Is there any advice on these two patches ?
> > > 
> > > [PATCH 2/4 V2] mmc: esdhc: workaround for dma err in the last system 
> > > transaction
> > > [PATCH 3/4 V3] mmc: esdhc: Correct host version of T4240-R1.0-R2.0.
> > > 
> > > 
> > > [PATCH 1/4 V4] powerpc/85xx: Add support for 85xx cpu type detection
> > > This patch is Act-by Scott.
> > > Patch 4/4 is split to four patches and Act-by Anton.
> > > 
> > > 
> > > Thanks all.
> > > 
> > > 
> > > 
> > [snip]
> > > > > +	if (!(((SVR_SOC_VER(svr) == SVR_T4240) && (SVR_REV(svr) == 0x10))
> > > > > ||
> > > > > +		((SVR_SOC_VER(svr) == SVR_B4860) && (SVR_REV(svr) == 0x10))
> > > > > ||
> > > > > +		((SVR_SOC_VER(svr) == SVR_P1010) && (SVR_REV(svr) == 0x10))
> > > > > ||
> > > > > +		((SVR_SOC_VER(svr) == SVR_P3041) && (SVR_REV(svr) <= 0x20))
> > > > > ||
> > > > > +		((SVR_SOC_VER(svr) == SVR_P2041) && (SVR_REV(svr) <= 0x20))
> > > > > ||
> > > > > +		((SVR_SOC_VER(svr) == SVR_P5040) && SVR_REV(svr) == 0x20)))
> > > > > +		return;
> > You need to include variants here.  If P5040 is affected, then P5021 is
> > affected.  If P2041 is affected, then P2040 is affected, etc.
> > 
> > -Scott
> > 
> > 
> Hi, Scott
> 
> This workaround is for CR:ENGR00229586: A-005055, Configs Affected
> only list these soc and its version.
> I was also wonder why only these boards?
> 
> But I can't add soc like P5021 as I think it should be. Maybe there
> are some difference between them.

The only difference between P5040 and P5021 is the number of cores
enabled.  It is physically the same silicon.  Likewise with a lot of
other variants.

-Scott