Power Management issues in MPC8313 processor

[Scott Wood]

On 10/25/2012 05:07:01 PM, Srivatsan Canchivaram wrote:
> Hi,
> 
> 
> I have a modem with a Freescale MPC8313E processor. I am trying to  
> enable
> power savings in the processor by placing it in Standby mode and  
> resume
> normal operation with a Wake-On-LAN magic packet.
> 
> 
> Following the directions in the Freescale Power Management app note, I
> enabled Power Management Support in the Linux kernel and device tree
> configurations.
> 
> 
> I ran the following command on the board:
> 
> echo standby > /sys/power/state
> 
> 
> This caused the console to hang and there was no further response to
> keyboard inputs. I enabled ‘no_console_suspend’ in the kernel and  
> when I
> loaded the new build and enabled standby mode, I observed an Oops  
> trace:
> 
> 
> 
> RASCOM_QCU.7.0.0013 $ echo standby > /sys/power/state
> 
> <6>PM: Syncing fFreezing user space processes ... ilesystems ...  
> <7>PM:
> Entering standby sleep
> 
> Unable to handle kernel paging request for instruction fetch
> 
> Faulting instruction address: 0x616d6570
> 
> Oops: Kernel access of bad area, sig: 11 [#1]
> 
> MPC831x RDB
> 
> Modules linked in: dsp rcspi modem i2c_mpc thermal_sys lm92 hwmon  
> [last
> unloaded: modem]
> 
> NIP: 616d6570 LR: c0165224 CTR: 616d6573
> 
> REGS: cd087d30 TRAP: 0400   Not tainted  (2.6.27)
> 
> MSR: 20001032 <ME,IR,DR>  CR: 28002024  XER: 20000000
> 
> TASK = cc312400[1196] 'echo' THREAD: cd086000
> 
> GPR00: 00000002 cd087de0 cc312400 cf821800 cd087de8 00000002 c06e0000
> c06da4a0
> 
> GPR08: c06da948 616d6573 00003fff c06c6308 28002022 10091248 0fffc000
> 100050b8
> 
> GPR16: 1008a270 10068810 100687c8 10068814 00000000 1008c284 1008c294
> c0246180
> 
> GPR24: c02ab9e4 c02ab9dc c06cc4f4 00000006 cd087e08 00000002 c06c595c
> cf821808
> 
> NIP [616d6570] 0x616d6570
> 
> LR [c0165224] platform_pm_suspend_noirq+0x84/0x88

What kernel are you using?  platform_pm_suspend_noirq was removed by  
this commit:

commit 9b39e73d0c2b265a7f8748b0e9a9f09be84079a8
Author: Rafael J. Wysocki <rjw at sisk.pl>
Date:   Sun Dec 18 00:34:24 2011 +0100

     PM / Sleep: Remove forward-only callbacks from platform bus type

     The forward-only PM callbacks provided by the platform bus type are
     not necessary any more, because the PM core executes driver  
callbacks
     when the corresponding subsystem callbacks are not present, so drop
     them.

     Signed-off-by: Rafael J. Wysocki <rjw at sisk.pl>

It seems that a driver's pm ops are getting corrupted -- maybe used  
after freeing?  Have you tried enabling slab/slub debug?

Can you instrument the code to see if there are any fields in the  
device struct that aren't corrupt, that could point out which device  
this is?

> I found another thread that dealt with Power Management issues on the
> Freescale MPC8313 processor:
> 
> https://lists.ozlabs.org/pipermail/linuxppc-dev/2012-January/095240.html
> 
> The resolution of this issue seems to be related to the JTAG TRST pin  
> being
> disabled. This is not relevant in my case as the TRST on my board is
> already inactive.

If you were seeing that, you'd see a hang rather than an oops.

-Scott