[PATCH] powerpc/85xx: introduce support for the Freescale / iVeia P1022RDK
Timur Tabi
timur at freescale.com
Tue Jul 24 09:12:29 EST 2012
The Freescale / iVeia P1022RDK reference board is a small-factor board
with a Freescale P1022 SOC. It includes:
1) 512 MB 64-bit DDR3-800 (max) memory
2) 8MB SPI serial flash memory for boot loader
3) Bootable 4-bit SD/MMC port
4) Two 10/100/1000 Ethernet connectors
5) One SATA port
6) Two USB ports
7) One PCIe x4 slot
8) DVI video connector
9) Audio input and output jacks, powered by a Wolfson WM8960 codec.
Unlike the P1022DS, the P1022RDK does not have any localbus devices,
presumably because of the localbus / DIU multiplexing restriction of
the P1022 SOC.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
arch/powerpc/boot/dts/p1022rdk.dts | 188 +++++++++++++++++++++++++++
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/configs/mpc85xx_smp_defconfig | 1 +
arch/powerpc/platforms/85xx/Kconfig | 7 +
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/p1022_rdk.c | 195 ++++++++++++++++++++++++++++
6 files changed, 393 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1022rdk.dts
create mode 100644 arch/powerpc/platforms/85xx/p1022_rdk.c
diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/p1022rdk.dts
new file mode 100644
index 0000000..51d82de
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1022rdk.dts
@@ -0,0 +1,188 @@
+/*
+ * P1022 RDK 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+ model = "fsl,P1022RDK";
+ compatible = "fsl,P1022RDK";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus at ffe05000 {
+ /* The P1022 RDK does not have any localbus devices */
+ status = "disabled";
+ };
+
+ board_soc: soc: soc at ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+ i2c at 3100 {
+ wm8960:codec at 1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ /* MCLK source is a stand-alone oscillator */
+ clock-frequency = <12288000>;
+ };
+ rtc at 68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
+ adt7461 at 4c{
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ zl6100 at 21{
+ compatible = "isil,zl6100";
+ reg = <0x21>;
+ };
+ zl6100 at 24{
+ compatible = "isil,zl6100";
+ reg = <0x24>;
+ };
+ zl6100 at 26{
+ compatible = "isil,zl6100";
+ reg = <0x26>;
+ };
+ zl6100 at 29{
+ compatible = "isil,zl6100";
+ reg = <0x29>;
+ };
+ };
+
+ spi at 7000 {
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ partition at 0 {
+ label = "full-spi-flash";
+ reg = <0x00000000 0x00100000>;
+ };
+ };
+ };
+
+ ssi at 15000 {
+ fsl,mode = "i2s-slave";
+ codec-handle = <&wm8960>;
+ };
+
+ usb at 22000 {
+ phy_type = "ulpi";
+ };
+
+ usb at 23000 {
+ phy_type = "ulpi";
+ };
+
+ mdio at 24000 {
+ phy0: ethernet-phy at 0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy1: ethernet-phy at 1 {
+ interrupts = <9 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio at 25000 {
+ tbi0: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ethernet at b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ ethernet at b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+ };
+
+ pci0: pcie at ffe09000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0x0 0xffe09000 0 0x1000>;
+ pcie at 0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie at ffe0a000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ pcie at 0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie at ffe0b000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ reg = <0 0xffe0b000 0 0x1000>;
+ pcie at 0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "fsl/p1022si-post.dtsi"
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 03ee911c..ae9d852 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -26,6 +26,7 @@ CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index fdfa84d..8d1c2a4 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -28,6 +28,7 @@ CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 159c01e..f0f2c85 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -104,6 +104,13 @@ config P1022_DS
help
This option enables support for the Freescale P1022DS reference board.
+config P1022_RDK
+ bool "Freescale / iVeia P1022 RDK"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Freescale / iVeia P1022RDK
+ reference board.
+
config P1023_RDS
bool "Freescale P1023 RDS"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 3dfe811..af417d2 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
+obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
new file mode 100644
index 0000000..b3cf11b
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -0,0 +1,195 @@
+/*
+ * P1022 RDK board specific routines
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Timur Tabi <timur at freescale.com>
+ *
+ * Based on p1022_ds.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
+#include <asm/div64.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
+#include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN 0x80000000
+#define CLKDVDR_PXCKINV 0x10000000
+#define CLKDVDR_PXCKDLY 0x06000000
+#define CLKDVDR_PXCLK_MASK 0x00FF0000
+
+/**
+ * p1022rdk_set_monitor_port: switch the output to a different monitor port
+ */
+static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+ if (port != FSL_DIU_PORT_DVI) {
+ pr_err("p1022rdk: unsupported monitor port %i\n", port);
+ return;
+ }
+}
+
+/**
+ * p1022rdk_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void p1022rdk_set_pixel_clock(unsigned int pixclock)
+{
+ struct device_node *guts_np = NULL;
+ struct ccsr_guts __iomem *guts;
+ unsigned long freq;
+ u64 temp;
+ u32 pxclk;
+
+ /* Map the global utilities registers. */
+ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+ if (!guts_np) {
+ pr_err("p1022rdk: missing global utilties device node\n");
+ return;
+ }
+
+ guts = of_iomap(guts_np, 0);
+ of_node_put(guts_np);
+ if (!guts) {
+ pr_err("p1022rdk: could not map global utilties device\n");
+ return;
+ }
+
+ /* Convert pixclock from a wavelength to a frequency */
+ temp = 1000000000000ULL;
+ do_div(temp, pixclock);
+ freq = temp;
+
+ /*
+ * 'pxclk' is the ratio of the platform clock to the pixel clock.
+ * This number is programmed into the CLKDVDR register, and the valid
+ * range of values is 2-255.
+ */
+ pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+ pxclk = clamp_t(u32, pxclk, 2, 255);
+
+ /* Disable the pixel clock, and set it to non-inverted and no delay */
+ clrbits32(&guts->clkdvdr,
+ CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+ /* Enable the clock and set the pxclk */
+ setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+
+ iounmap(guts);
+}
+
+/**
+ * p1022rdk_valid_monitor_port: set the monitor port for sysfs
+ */
+enum fsl_diu_monitor_port
+p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+ return FSL_DIU_PORT_DVI;
+}
+
+#endif
+
+void __init p1022_rdk_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init p1022_rdk_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+ if (ppc_md.progress)
+ ppc_md.progress("p1022_rdk_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
+ struct resource rsrc;
+ struct pci_controller *hose;
+
+ of_address_to_resource(np, 0, &rsrc);
+
+ if ((rsrc.start & 0xfffff) == 0x8000)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+#endif
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+ diu_ops.set_monitor_port = p1022rdk_set_monitor_port;
+ diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock;
+ diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port;
+#endif
+
+ mpc85xx_smp_init();
+
+#ifdef CONFIG_SWIOTLB
+ if ((memblock_end_of_DRAM() - 1) > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+
+ pr_info("Freescale / iVeia P1022 RDK reference board\n");
+}
+
+machine_device_initcall(p1022_rdk, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p1022_rdk_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,p1022rdk");
+}
+
+define_machine(p1022_rdk) {
+ .name = "P1022 RDK",
+ .probe = p1022_rdk_probe,
+ .setup_arch = p1022_rdk_setup_arch,
+ .init_IRQ = p1022_rdk_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.7.3.4
More information about the Linuxppc-dev
mailing list