[PATCH] powerpc/85xx: Add dts files for P1021RDB-PC board

[Kumar Gala]

On Jul 10, 2012, at 3:39 AM, Xu Jiucheng wrote:

> P1021RDB-PC Overview
> -----------------
> 1Gbyte DDR3 (on board DDR)
> 16Mbyte NOR flash
> 32Mbyte eSLC NAND Flash
> 256 Kbit M24256 I2C EEPROM
> 128 Mbit SPI Flash memory
> Real-time clock on I2C bus
> SD/MMC connector to interface with the SD memory card
> PCIex
> 	- x1 PCIe slot or x1 PCIe to dual SATA controller
> 	- x1 mini-PCIe slot
> USB 2.0
> 	- ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A
> 	- Two USB2.0 Type A receptacles
> 	- One USB2.0 signal to Mini PCIe slot
> eTSEC1: Connected to RGMII PHY VSC7385
> eTSEC2: Connected to SGMII PHY VSC8221
> eTSEC3: Connected to SGMII PHY AR8021
> DUART interface: supports two UARTs up to 115200 bps for console display
> 
> Signed-off-by: Xu Jiucheng <Jiucheng.Xu at freescale.com>
> Signed-off-by: Matthew McClintock <msm at freescale.com>
> ---
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi    |  236 +++++++++++++++++++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc_32b.dts |   96 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc_36b.dts |   96 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb.dts        |   96 ------------
> arch/powerpc/boot/dts/p1021rdb.dtsi       |  236 -----------------------------
> arch/powerpc/boot/dts/p1021rdb_36b.dts    |   96 ------------
> 6 files changed, 428 insertions(+), 428 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb.dts
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb.dtsi
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb_36b.dts

Do we really need a 32 & 36 bit device tree for this board?  Isnt the memory fixed so why not just have 32b?

Also, why are you removing the dts for the older P1021RDB??

- k