[PATCH v2] powerpc/p3060qds: Add support for P3060QDS board
Kumar Gala
galak at kernel.crashing.org
Sat Sep 17 01:35:07 EST 2011
From: Shengzhou Liu <Shengzhou.Liu at freescale.com>
The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
The P3060 Processor combines six e500mc Power Architecture processor cores with
high-performance datapath acceleration architecture(DPAA), CoreNet fabric
infrastructure, as well as network and peripheral interfaces.
P3060QDS Board Overview:
Memory subsystem:
- 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
- 128M Bytes NOR flash single-chip memory
- 16M Bytes SPI flash
- 8K Bytes AT24C64 I2C EEPROM
Ethernet:
- 4x1G + 4x1G/2.5G Ethernet controllers
- 2xRGMII + 1xMII, three VSC8641 PHYs on board
- Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
PCIe: Two PCI Express 2.0 controllers/ports
USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
I2C: Four I2C controllers
UART: Supports up to four UARTs
RapidIO: Supports two serial RapidIO ports
Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
* Update localbus dts node (fix ranges and fpga node)
arch/powerpc/boot/dts/p3060qds.dts | 195 +++++++++
arch/powerpc/boot/dts/p3060si.dtsi | 600 ++++++++++++++++++++++++++
arch/powerpc/configs/corenet32_smp_defconfig | 1 +
arch/powerpc/platforms/85xx/Kconfig | 12 +
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/p3060_qds.c | 77 ++++
6 files changed, 886 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p3060qds.dts
create mode 100644 arch/powerpc/boot/dts/p3060si.dtsi
create mode 100644 arch/powerpc/platforms/85xx/p3060_qds.c
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
new file mode 100644
index 0000000..5d04a55
--- /dev/null
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -0,0 +1,195 @@
+/*
+ * P3060QDS Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3060si.dtsi"
+
+/ {
+ model = "fsl,P3060QDS";
+ compatible = "fsl,P3060QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc at ffe000000 {
+ spi at 110000 {
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition at u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition at kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition at dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition at fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ i2c at 118100 {
+ eeprom at 51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom at 52 {
+ compatible = "at24,24c256";
+ reg = <0x52>;
+ };
+ rtc at 68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ };
+
+ usb0: usb at 210000 {
+ phy_type = "ulpi";
+ };
+
+ usb1: usb at 211000 {
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+ };
+
+ rapidio0: rapidio at ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x20000>;
+ ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+ };
+
+ localbus at ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xffa00000 0x00040000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+
+ nand at 2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ partition at 0 {
+ label = "NAND U-Boot Image";
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ partition at 2000000 {
+ label = "NAND Root File System";
+ reg = <0x02000000 0x10000000>;
+ };
+
+ partition at 12000000 {
+ label = "NAND Compressed RFS Image";
+ reg = <0x12000000 0x08000000>;
+ };
+
+ partition at 1a000000 {
+ label = "NAND Linux Kernel Image";
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ partition at 1e000000 {
+ label = "NAND DTB Image";
+ reg = <0x1e000000 0x01000000>;
+ };
+
+ partition at 1f000000 {
+ label = "NAND Writable User area";
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control at 3,0 {
+ compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
+ reg = <3 0 0x100>;
+ };
+ };
+
+ pci0: pcie at ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie at 0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie at ffe201000 {
+ reg = <0xf 0xfe201000 0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie at 0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
new file mode 100644
index 0000000..0e2cd10
--- /dev/null
+++ b/arch/powerpc/boot/dts/p3060si.dtsi
@@ -0,0 +1,600 @@
+/*
+ * P3060 Silicon Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc at 1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc at 4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc at 5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc at 6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc at 7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+
+ soc: soc at ffe000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law at 0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ memory-controller at 8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller at 10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf at 18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu at 20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+ mpic: pic at 40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi0: msi at 41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+ };
+
+ msi1: msi at 41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+ };
+
+ msi2: msi at 41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+ };
+
+ guts: global-utilities at e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities at e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities at e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities at e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp at e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes at ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+ dma0: dma at 100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel at 0 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+ };
+
+ dma1: dma at 101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel at 0 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+ };
+
+ spi at 110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+ fsl,espi-num-chipselects = <4>;
+ };
+
+ i2c at 118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c at 118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c at 119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ i2c at 119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ serial0: serial at 11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial1: serial at 11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial2: serial at 11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ serial3: serial at 11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ gpio0: gpio at 130000 {
+ compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ usb0: usb at 210000 {
+ compatible = "fsl,p3060-usb2-mph",
+ "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+ };
+
+ usb1: usb at 211000 {
+ compatible = "fsl,p3060-usb2-dr",
+ "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+ };
+
+ crypto: crypto at 300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr at 1000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr at 2000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr at 3000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr at 4000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic at 6000 {
+ compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a at 0 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b at 20 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c at 40 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d at 60 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon at 314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2 0 0>;
+ };
+ };
+
+ rapidio0: rapidio at ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ interrupts = <
+ 16 2 1 11 /* err_irq */
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0 /* bell_inb_irq */
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0 /* msg1_rx_irq */
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>; /* msg2_rx_irq */
+ };
+
+ localbus at ffe124000 {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ pci0: pcie at ffe200000 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi0>;
+ interrupts = <16 2 1 15>;
+ pcie at 0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+ };
+
+ pci1: pcie at ffe201000 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi1>;
+ interrupts = <16 2 1 14>;
+ pcie at 0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+ };
+};
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 49cfe85..014780c 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -25,6 +25,7 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
+CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index ae82322..6df57f0 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -195,6 +195,18 @@ config P3041_DS
help
This option enables support for the P3041 DS board
+config P3060_QDS
+ bool "Freescale P3060 QDS"
+ select DEFAULT_UIMAGE
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select MPC8xxx_GPIO
+ select HAS_RAPIDIO
+ select PPC_EPAPR_HV_PIC
+ help
+ This option enables support for the P3060 QDS board
+
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 39e6c22..bc5acb9 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
+obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c
new file mode 100644
index 0000000..01dcf44
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p3060_qds.c
@@ -0,0 +1,77 @@
+/*
+ * P3060 QDS Setup
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p3060_qds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+ if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
+ return 1;
+
+ /* Check if we're running under the Freescale hypervisor */
+ if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
+ ppc_md.init_IRQ = ehv_pic_init;
+ ppc_md.get_irq = ehv_pic_get_irq;
+ ppc_md.restart = fsl_hv_restart;
+ ppc_md.power_off = fsl_hv_halt;
+ ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(p3060_qds) {
+ .name = "P3060 QDS",
+ .probe = p3060_qds_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_coreint_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+ .power_save = e500_idle,
+};
+
+machine_device_initcall(p3060_qds, declare_of_platform_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
+#endif
--
1.7.3.4
More information about the Linuxppc-dev
mailing list