[PATCH] powerpc/85xx: enable the framebuffer console for the defconfigs

Timur Tabi timur at freescale.com
Fri Jun 24 05:48:55 EST 2011


Enable framebuffer console support by default in the defconfigs for the
Freescale 85xx-based reference board.  This allows the boot messages to
be shown on the video display on the P1022DS.

Signed-off-by: Timur Tabi <timur at freescale.com>
---
 arch/powerpc/configs/mpc85xx_defconfig     |    4 ++++
 arch/powerpc/configs/mpc85xx_smp_defconfig |    4 ++++
 2 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 96b89df..b212e3d 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -128,6 +128,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index de65841..87fbb2e 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -130,6 +130,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
-- 
1.7.3.4




More information about the Linuxppc-dev mailing list