[linuxppc-release] [powerpc] boot up problem

[Kumar Gala]

This still needs a dts fix from Andy.

- k

On Dec 7, 2011, at 1:27 AM, Jia Hongtao-B38951 wrote:

> Is this the patch you mentioned?
> http://patchwork.ozlabs.org/patch/128806/
> 
> I applied this patch but the issue was still there.
> 
> -----Original Message-----
> From: Tabi Timur-B04825 
> Sent: Friday, December 02, 2011 11:56 AM
> To: Jia Hongtao-B38951
> Cc: Kumar Gala; linuxppc-dev at lists.ozlabs.org; Li Yang-R58472; Fleming Andy-AFLEMING
> Subject: Re: [linuxppc-release] [powerpc] boot up problem
> 
> Jia Hongtao-B38951 wrote:
>> Hi
>> 
>> I just found that the 'next' branch you mentioned have problem to boot up.
>> I test it in p1022ds and p1010rdb boards and the result are both the same.
>> Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit) with 36bit-uboot.
>> And for p1010rdb I use all 32bit image.
>> The problem list below:
>> 
>> scsi0 : sata_fsl
>> ata1: SATA max UDMA/133 irq 74
>> fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init
>> scsi1 : sata_fsl
>> ata2: SATA max UDMA/133 irq 41
>> Fixed MDIO Bus: probed
>> Unable to handle kernel paging request for data at address 0x00000000 
>> Faulting instruction address: 0xc0451630
>> Oops: Kernel access of bad area, sig: 11 [#1]
> 
> Andy has phy driver patch that fixes this.
> 
> --
> Timur Tabi
> Linux kernel developer at Freescale