[linuxppc-release] [powerpc] boot up problem

[Jia Hongtao-B38951]

Is this the patch you mentioned?
http://patchwork.ozlabs.org/patch/128806/

I applied this patch but the issue was still there.

-----Original Message-----
From: Tabi Timur-B04825 
Sent: Friday, December 02, 2011 11:56 AM
To: Jia Hongtao-B38951
Cc: Kumar Gala; linuxppc-dev at lists.ozlabs.org; Li Yang-R58472; Fleming Andy-AFLEMING
Subject: Re: [linuxppc-release] [powerpc] boot up problem

Jia Hongtao-B38951 wrote:
> Hi
>
> I just found that the 'next' branch you mentioned have problem to boot up.
> I test it in p1022ds and p1010rdb boards and the result are both the same.
> Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit) with 36bit-uboot.
> And for p1010rdb I use all 32bit image.
> The problem list below:
>
> scsi0 : sata_fsl
> ata1: SATA max UDMA/133 irq 74
> fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init
> scsi1 : sata_fsl
> ata2: SATA max UDMA/133 irq 41
> Fixed MDIO Bus: probed
> Unable to handle kernel paging request for data at address 0x00000000 
> Faulting instruction address: 0xc0451630
> Oops: Kernel access of bad area, sig: 11 [#1]

Andy has phy driver patch that fixes this.

--
Timur Tabi
Linux kernel developer at Freescale