FW: Ethernet driver WR linux

[smitha.vanga at wipro.com]

Hi Scott,

Below is the .dts file. My board is based on mpc8247. Currently using
FCC1.

/*
 * MPC8272 EPN412 Device Tree Source
 *
 * Copyright 2005 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify
it
 * under  the terms of  the GNU General  Public License as published by
the
 * Free Software Foundation;  either version 2 of the  License, or (at
your
 * option) any later version.
 */

/ {
       model = "MPC8247 EPN412";
       compatible = "MPC82XX";
       #address-cells = <1>;
       #size-cells = <1>;
       linux,phandle = <100>;

       cpus {
               #cpus = <1>;
               #address-cells = <1>;
               #size-cells = <0>;
               linux,phandle = <200>;

               PowerPC,8247 at 0 {
                       device_type = "cpu";
                       reg = <0>;
                       d-cache-line-size = <20>;       // 32 bytes
                       i-cache-line-size = <20>;       // 32 bytes
                       d-cache-size = <4000>;          // L1, 16K
                       i-cache-size = <4000>;          // L1, 16K
                       timebase-frequency = <0>;
                       bus-frequency = <0>;
                       clock-frequency = <0>;
                       32-bit;
                       linux,phandle = <201>;
               };
       };

       interrupt-controller at f8200000 {
               linux,phandle = <f8200000>;
               #address-cells = <0>;
               #interrupt-cells = <2>;
               interrupt-controller;
               reg = <f8200000 f8200004>;
               built-in;
               device_type = "pci-pic";
       };

       memory {
               device_type = "memory";
               linux,phandle = <300>;
               reg = <00000000 4000000>;
       };


       soc8272 at f0000000 {
               #address-cells = <1>;
               #size-cells = <1>;
               #interrupt-cells = <2>;
               device_type = "soc";
               ranges = <00000000 f0000000 00053000>;
               reg = <f0000000 10000>;

               cpm at 119c0{
                       linux,phandle = <f0000000>;
                       #address-cells = <1>;
                       #size-cells = <1>;
                       #interrupt-cells = <2>;
                       device_type = "cpm";
                       model = "CPM2";
                       ranges = <00000000 00000000 20000>;
                       reg = <0 20000>;
                       command-proc = <119c0>;
                       brg-frequency = <FE70B8>;
                       cpm_clk = <7F385C0>;

                       scc at 11a00 {
                               device_type = "serial";
                               compatible = "cpm_uart";
                               model = "SCC";
                               device-id = <1>;
                               reg = <11a00 20 8000 100>;
                               current-speed = <2580>;
                               interrupts = <28 2>;
                               interrupt-parent = <10c00>;
                               clock-setup = <0 00ffffff>;
                               rx-clock = <1>;
                               tx-clock = <1>;
                       };

			mdio at 10d40 {
                       device_type = "mdio";
                       compatible = "fs_enet";
                       reg = <0 0>;
                       linux,phandle = <24520>;
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ethernet-phy at 0 {
                               linux,phandle = <2452000>;
                               interrupt-parent = <10c00>;
                               interrupts = <17 4>;
                               reg = <0>;
                               bitbang = [ 12 12 13 02 02 01 ];
                               device_type = "ethernet-phy";
                       };
                      
               };
			ethernet at 11300 {
                       #address-cells = <1>;
                       #size-cells = <0>;
                       device_type = "network";
                       device-id = <1>;
                       compatible = "fs_enet";
                       model = "FCC";
                       reg = <11300 20 8400 100 11380 30>;
                       mac-address = [ 00 e0 ee 00 05 2e ];
                       interrupts = <20 2>;
                       interrupt-parent = <10c00>;
                       phy-handle = <2452000>;
                       rx-clock = <13>;
                       tx-clock = <12>;
               };


 			                      

               };
               interrupt-controller at 10c00 {
                       linux,phandle = <10c00>;
                       #address-cells = <0>;
                       #interrupt-cells = <2>;
                       interrupt-controller;
                       reg = <10c00 80>;
                       built-in;
                       device_type = "cpm-pic";
		       compatible = "CPM2";
               };

               flash at fe000000 {
			                device_type = "rom";
			                compatible = "direct-mapped";
			                probe-type = "CFI";
			                reg = <fe000000 00800000>;
			                bank-width = <1>;
			                partitions = <00780000 00080000
			                              00770000 00010000
			                              00760000 00010000
			                              00750000
00010000>;
			                partition-names =
"u-boot\0u-boot env1\0u-boot env2\0id data";
		};

               


       };
};

Regards,
Smitha

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com