FW: Ethernet driver WR linux

[Scott Wood]

On 08/05/2011 12:31 AM, smitha.vanga at wipro.com wrote:
> Hi
>  
> I have bringup WR linux 2.6.38 on a custom mpc8247 board. Not able to
> configure the ipaddress.  When I boot my linux kernel I get the below
> message.
> Also I am using the fec 1.  The fec is not getting initialized. 
> fs_enet.c:v1.0 (Aug 8, 2005)
> BB MII Bus: Cannot register as MDIO bus
> fsl-bb-mdio: probe of fsl-bb-mdio.0 failed with error -1
> BB MII Bus: Cannot register as MDIO bus
> fsl-bb-mdio: probe of fsl-bb-mdio.1 failed with error -1
> I have enabled the following:
>  
> 
> CONFIG_NET_ETHERNET=y
> 
> CONFIG_MII=y
> 
> CONFIG_FS_ENET=y
> 
> # CONFIG_FS_ENET_HAS_SCC is not set
> 
> CONFIG_FS_ENET_HAS_FCC=y

Can you attach your device tree?  What sort of mdio do you have on your
board?

> *Please do not print this email unless it is absolutely necessary. *
> 
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s)
> and may contain proprietary, confidential or privileged information. If
> you are not the intended recipient, you should not disseminate,
> distribute or copy this e-mail. Please notify the sender immediately and
> destroy all copies of this message and any attachments.
> 
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses.
> The company accepts no liability for any damage caused by any virus
> transmitted by this email.
> 
> www.wipro.com

Is there any way you can turn this crud off?

-Scott