device not available because of BAR 0 collisions
Steven A. Falco
sfalco at harris.com
Tue Apr 26 23:38:24 EST 2011
On 04/25/2011 08:01 PM, Benjamin Herrenschmidt wrote:
> On Mon, 2011-04-25 at 16:10 -0400, Steven A. Falco wrote:
>> I'm getting an error message when trying to talk to some custom
>> hardware:
>>
>> dx83xx 0001:43:00.0: device not available because of BAR 0
>> [0xa1000000-0xa1ffffff] collisions
>>
>> I see in setup-res.c that this message comes out when there is no
>> parent for
>> a device resource.
>
> .../...
>
> It mostly happens in arch/powerpc/kernel/pci-common.c and the generic
> setup-res.c
>
> Try #define DEBUG at the top (before the #includes) of pci-common.c and
> pci_32.c (remove the exiting #undef in the last one) and send us the
> full dmesg log, along with the output of cat /proc/iomem
>
> Cheers,
> Ben.
>
>
>
Thanks for the help!
PCIe 0 has an FPGA connected - it is behaving as expected. PCIe 1 has the
PLX PCIe switch followed by a pair of ASICs - they are the ones generating
the error.
Here is /proc/iomem:
90000000-9fffffff : /plb/pciex at 0c0000000
90000000-93ffffff : PCI Bus 0001:41
90000000-93ffffff : PCI Bus 0001:42
90000000-91ffffff : PCI Bus 0001:43
92000000-93ffffff : PCI Bus 0001:44
94000000-940fffff : PCI Bus 0001:41
94000000-9401ffff : 0001:41:00.0
e0000000-e7ffffff : /plb/pciex at 0a0000000
e0000000-e5ffffff : PCI Bus 0000:01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e40fffff : 0000:01:00.0
e4100000-e41fffff : 0000:01:00.0
ef600200-ef600207 : serial
ef600300-ef600307 : serial
ef600600-ef600606 : spi_ppc4xx_of
ef6c0000-ef6cffff : dwc_otg.0
ef6c0000-ef6cffff : dwc_otg
fc000000-ffffffff : fc000000.nor_flash
And here is dmesg, captured after the failed modprobe, so you can see
those error messages (DEBUG enabled in pci-common.c and pci_32.c):
Using Flex-AM machine description
Linux version 2.6.30.3-00063-g0af2edc-dirty (sfalco at hw1.cs.myharris.net) (gcc version 4.2.2) #35 Tue Apr 26 09:20:23 EDT 2011
Found initrd at 0xcfba0000:0xcfea1872
Found legacy serial port 0 for /plb/opb/serial at ef600200
mem=ef600200, taddr=ef600200, irq=0, clk=33333333, speed=0
Found legacy serial port 1 for /plb/opb/serial at ef600300
mem=ef600300, taddr=ef600300, irq=0, clk=33333333, speed=0
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0x00000000 -> 0x00010000
Normal 0x00010000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00010000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c0406bdc, node_mem_map c0443000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: root=/dev/sda2 rw ip=137.237.178.150:137.237.178.9:137.237.178.1:255.255.255.0:flx-am:eth0:off panic=1 console=ttyS1,115200 debug
NR_IRQS:512
UIC0 (32 IRQ sources) at DCR 0xc0
UIC1 (32 IRQ sources) at DCR 0xd0
irq: irq 30 on host /interrupt-controller mapped to virtual irq 30
UIC2 (32 IRQ sources) at DCR 0xe0
irq: irq 28 on host /interrupt-controller mapped to virtual irq 28
PID hash table entries: 1024 (order: 10, 4096 bytes)
time_init: decrementer frequency = 400.000000 MHz
time_init: processor frequency = 400.000000 MHz
clocksource: timebase mult[a00000] shift[22] registered
clockevent: decrementer mult[6666] shift[16] cpu[0]
I-pipe 2.7-02: pipeline enabled.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252092k/262144k available (3944k kernel code, 9744k reserved, 184k data, 204k bss, 164k init)
Kernel virtual memory layout:
* 0xffffe000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfde00000..0xfde00000 : early ioremap
* 0xd1000000..0xfde00000 : vmalloc & ioremap
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 798.72 BogoMIPS (lpj=1597440)
Mount-cache hash table entries: 512
net_namespace: 520 bytes
NET: Registered protocol family 16
PCIE0: Checking link...
PCIE0: Device detected, waiting for link...
PCIE0: link is up !
PCI host bridge /plb/pciex at 0a0000000 (primary) ranges:
MEM 0x00000000e0000000..0x00000000e7ffffff -> 0x0000000080000000
IO 0x00000000e8000000..0x00000000e800ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCIE0: successfully set as root-complex
PCIE1: Checking link...
PCIE1: Device detected, waiting for link...
PCIE1: link is up !
PCI host bridge /plb/pciex at 0c0000000 (primary) ranges:
MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000080000000
IO 0x00000000e8010000..0x00000000e801ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCIE1: successfully set as root-complex
PCI: Probing PCI hardware
PCI: Scanning PHB /plb/pciex at 0a0000000
PCI: PHB IO resource = 00000000fffe0000-00000000fffeffff [100]
PCI: PHB MEM resource 0 = 00000000e0000000-00000000e7ffffff [200]
PCI: PHB MEM offset = 0000000060000000
PCI: PHB IO offset = fffe0000
pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x7fffffff]
PCI:0000:00:00.0 Resource 0 0000000000000000-000000007fffffff [21208] is unassigned
PCI: Hiding 4xx host bridge resources 0000:00:00.0
PCI: Fixup bus devices 0 (PHB)
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex at 0a0000000
result is <NULL>
PCI: Try to map irq for 0000:00:00.0...
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex at 0a0000000
result is <NULL>
pci 0000:01:00.0: reg 10 32bit mmio: [0x80000000-0x800fffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0x80100000-0x801fffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0x84000000-0x87ffffff]
PCI:0000:01:00.0 Resource 0 0000000080000000-00000000800fffff [20200] fixup...
PCI:0000:01:00.0 00000000e0000000-00000000e00fffff
PCI:0000:01:00.0 Resource 1 0000000080100000-00000000801fffff [20200] fixup...
PCI:0000:01:00.0 00000000e0100000-00000000e01fffff
PCI:0000:01:00.0 Resource 2 0000000084000000-0000000087ffffff [20200] fixup...
PCI:0000:01:00.0 00000000e4000000-00000000e7ffffff
pci 0000:00:00.0: bridge io port: [0x00-0xfff]
pci 0000:00:00.0: bridge 32bit mmio: [0x80000000-0x87ffffff]
PCI:0000:00:00.0 Bus rsrc 0 0000000000000000-0000000000000fff [101] fixup...
PCI:0000:00:00.0 00000000fffe0000-00000000fffe0fff
PCI:0000:00:00.0 Bus rsrc 1 0000000080000000-0000000087ffffff [200] fixup...
PCI:0000:00:00.0 00000000e0000000-00000000e7ffffff
PCI: Fixup bus devices 1 (0000:00:00.0)
pci_busdev_to_OF_node(1,0x0)
PCI: Try to map irq for 0000:01:00.0...
pci_busdev_to_OF_node(1,0x0)
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex at 0a0000000
result is <NULL>
Got one, spec 2 cells (0x00000000 0x00000004...) on /interrupt-controller2
irq: irq 0 on host /interrupt-controller2 mapped to virtual irq 16
Mapped to linux irq 16
PCI: Scanning PHB /plb/pciex at 0c0000000
PCI: PHB IO resource = 0000000000000000-000000000000ffff [100]
PCI: PHB MEM resource 0 = 0000000090000000-000000009fffffff [200]
PCI: PHB MEM offset = 0000000010000000
PCI: PHB IO offset = 00000000
pci 0001:40:00.0: reg 10 32bit mmio: [0x000000-0x7fffffff]
PCI:0001:40:00.0 Resource 0 0000000000000000-000000007fffffff [21208] is unassigned
PCI: Hiding 4xx host bridge resources 0001:40:00.0
PCI: Fixup bus devices 64 (PHB)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
PCI: Try to map irq for 0001:40:00.0...
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
pci 0001:41:00.0: reg 10 32bit mmio: [0x90000000-0x9001ffff]
PCI:0001:41:00.0 Resource 0 0000000090000000-000000009001ffff [20200] fixup...
PCI:0001:41:00.0 00000000a0000000-00000000a001ffff
pci 0001:41:00.0: PME# supported from D0 D3hot D3cold
pci 0001:41:00.0: PME# disabled
pci 0001:40:00.0: bridge io port: [0x00-0xfff]
pci 0001:40:00.0: bridge 32bit mmio: [0x90000000-0x94ffffff]
PCI:0001:40:00.0 Bus rsrc 0 0000000000000000-0000000000000fff [101] fixup...
PCI:0001:40:00.0 0000000000000000-0000000000000fff
PCI:0001:40:00.0 Bus rsrc 1 0000000090000000-0000000094ffffff [200] fixup...
PCI:0001:40:00.0 00000000a0000000-00000000a4ffffff
PCI: Fixup bus devices 65 (0001:40:00.0)
pci_busdev_to_OF_node(65,0x0)
PCI: Try to map irq for 0001:41:00.0...
pci_busdev_to_OF_node(65,0x0)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
Got one, spec 2 cells (0x0000000b 0x00000004...) on /interrupt-controller2
irq: irq 11 on host /interrupt-controller2 mapped to virtual irq 17
Mapped to linux irq 17
pci 0001:42:01.0: PME# supported from D0 D3hot D3cold
pci 0001:42:01.0: PME# disabled
pci 0001:42:02.0: PME# supported from D0 D3hot D3cold
pci 0001:42:02.0: PME# disabled
pci 0001:41:00.0: bridge 32bit mmio: [0x90100000-0x94ffffff]
PCI:0001:41:00.0 Bus rsrc 1 0000000090100000-0000000094ffffff [200] fixup...
PCI:0001:41:00.0 00000000a0100000-00000000a4ffffff
PCI: Fixup bus devices 66 (0001:41:00.0)
pci_busdev_to_OF_node(66,0x8)
PCI: Try to map irq for 0001:42:01.0...
pci_busdev_to_OF_node(66,0x8)
pci_busdev_to_OF_node(65,0x0)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
Got one, spec 2 cells (0x0000000c 0x00000004...) on /interrupt-controller2
irq: irq 12 on host /interrupt-controller2 mapped to virtual irq 18
Mapped to linux irq 18
pci_busdev_to_OF_node(66,0x10)
PCI: Try to map irq for 0001:42:02.0...
pci_busdev_to_OF_node(66,0x10)
pci_busdev_to_OF_node(65,0x0)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
Got one, spec 2 cells (0x0000000d 0x00000004...) on /interrupt-controller2
irq: irq 13 on host /interrupt-controller2 mapped to virtual irq 19
Mapped to linux irq 19
pci 0001:43:00.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
pci 0001:43:00.0: reg 14 32bit mmio: [0x92000000-0x92ffffff]
PCI:0001:43:00.0 Resource 0 0000000091000000-0000000091ffffff [21208] fixup...
PCI:0001:43:00.0 00000000a1000000-00000000a1ffffff
PCI:0001:43:00.0 Resource 1 0000000092000000-0000000092ffffff [21208] fixup...
PCI:0001:43:00.0 00000000a2000000-00000000a2ffffff
pci 0001:42:01.0: bridge 32bit mmio: [0x90100000-0x92ffffff]
PCI:0001:42:01.0 Bus rsrc 1 0000000090100000-0000000092ffffff [200] fixup...
PCI:0001:42:01.0 00000000a0100000-00000000a2ffffff
PCI: Fixup bus devices 67 (0001:42:01.0)
pci_busdev_to_OF_node(67,0x0)
PCI: Try to map irq for 0001:43:00.0...
pci_busdev_to_OF_node(67,0x0)
pci_busdev_to_OF_node(66,0x8)
pci_busdev_to_OF_node(65,0x0)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
Got one, spec 2 cells (0x0000000c 0x00000004...) on /interrupt-controller2
Mapped to linux irq 18
pci 0001:44:00.0: reg 10 32bit mmio: [0x93000000-0x93ffffff]
pci 0001:44:00.0: reg 14 32bit mmio: [0x94000000-0x94ffffff]
PCI:0001:44:00.0 Resource 0 0000000093000000-0000000093ffffff [21208] fixup...
PCI:0001:44:00.0 00000000a3000000-00000000a3ffffff
PCI:0001:44:00.0 Resource 1 0000000094000000-0000000094ffffff [21208] fixup...
PCI:0001:44:00.0 00000000a4000000-00000000a4ffffff
pci 0001:42:02.0: bridge 32bit mmio: [0x93000000-0x94ffffff]
PCI:0001:42:02.0 Bus rsrc 1 0000000093000000-0000000094ffffff [200] fixup...
PCI:0001:42:02.0 00000000a3000000-00000000a4ffffff
PCI: Fixup bus devices 68 (0001:42:02.0)
pci_busdev_to_OF_node(68,0x0)
PCI: Try to map irq for 0001:44:00.0...
pci_busdev_to_OF_node(68,0x0)
pci_busdev_to_OF_node(66,0x10)
pci_busdev_to_OF_node(65,0x0)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex at 0c0000000
result is <NULL>
Got one, spec 2 cells (0x0000000d 0x00000004...) on /interrupt-controller2
Mapped to linux irq 19
PCI: Allocating bus resources for 0000:00...
PCI: PHB (bus 0) bridge rsrc 0: 00000000fffe0000-00000000fffeffff [0x100], parent c03de440 (PCI IO)
PCI: PHB (bus 0) bridge rsrc 1: 00000000e0000000-00000000e7ffffff [0x200], parent c03de424 (PCI mem)
PCI: Allocating bus resources for 0000:01...
PCI: Allocating bus resources for 0001:40...
PCI: PHB (bus 64) bridge rsrc 0: 0000000000000000-000000000000ffff [0x100], parent c03de440 (PCI IO)
PCI: PHB (bus 64) bridge rsrc 1: 0000000090000000-000000009fffffff [0x200], parent c03de424 (PCI mem)
PCI: Allocating bus resources for 0001:41...
PCI: Allocating bus resources for 0001:42...
PCI: Allocating bus resources for 0001:43...
PCI: Allocating bus resources for 0001:44...
Reserving legacy ranges for domain 0000
Candidate legacy IO: [0xfffe0000-0xfffe0fff]
hose mem offset: 0000000060000000
hose mem res: [0xe0000000-0xe7ffffff]
Reserving legacy ranges for domain 0001
Candidate legacy IO: [0x00-0xfff]
hose mem offset: 0000000010000000
hose mem res: [0x90000000-0x9fffffff]
PCI: Assigning unassigned resources...
pci 0000:00:00.0: PCI bridge, secondary bus 0000:01
pci 0000:00:00.0: IO window: disabled
pci 0000:00:00.0: MEM window: 0x80000000-0x85ffffff
pci 0000:00:00.0: PREFETCH window: disabled
pci 0001:42:01.0: PCI bridge, secondary bus 0001:43
pci 0001:42:01.0: IO window: disabled
pci 0001:42:01.0: MEM window: disabled
pci 0001:42:01.0: PREFETCH window: 0x00000080000000-0x00000081ffffff
pci 0001:42:02.0: PCI bridge, secondary bus 0001:44
pci 0001:42:02.0: IO window: disabled
pci 0001:42:02.0: MEM window: disabled
pci 0001:42:02.0: PREFETCH window: 0x00000082000000-0x00000083ffffff
pci 0001:41:00.0: PCI bridge, secondary bus 0001:42
pci 0001:41:00.0: IO window: disabled
pci 0001:41:00.0: MEM window: disabled
pci 0001:41:00.0: PREFETCH window: 0x00000080000000-0x00000083ffffff
pci 0001:40:00.0: PCI bridge, secondary bus 0001:41
pci 0001:40:00.0: IO window: disabled
pci 0001:40:00.0: MEM window: 0x84000000-0x840fffff
pci 0001:40:00.0: PREFETCH window: 0x00000080000000-0x00000083ffffff
pci_bus 0000:00: resource 0 io: [0xfffe0000-0xfffeffff]
pci_bus 0000:00: resource 1 mem: [0xe0000000-0xe7ffffff]
pci_bus 0000:01: resource 0 mem: [0xfffe0000-0xfffe0fff]
pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe5ffffff]
pci_bus 0001:40: resource 0 io: [0x00-0xffff]
pci_bus 0001:40: resource 1 mem: [0x90000000-0x9fffffff]
pci_bus 0001:41: resource 0 mem: [0x0-0xfff]
pci_bus 0001:41: resource 1 mem: [0x94000000-0x940fffff]
pci_bus 0001:41: resource 2 pref mem [0x90000000-0x93ffffff]
pci_bus 0001:42: resource 1 mem: [0xa0100000-0xa4ffffff]
pci_bus 0001:42: resource 2 pref mem [0x90000000-0x93ffffff]
pci_bus 0001:43: resource 1 mem: [0xa0100000-0xa2ffffff]
pci_bus 0001:43: resource 2 pref mem [0x90000000-0x91ffffff]
pci_bus 0001:44: resource 1 mem: [0xa3000000-0xa4ffffff]
pci_bus 0001:44: resource 2 pref mem [0x92000000-0x93ffffff]
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3078k freed
irq: irq 26 on host /interrupt-controller mapped to virtual irq 26
irq: irq 1 on host /interrupt-controller mapped to virtual irq 20
irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 21
irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 22
irq: irq 12 on host /interrupt-controller mapped to virtual irq 23
I-pipe: Domain Xenomai registered.
Xenomai: hal/powerpc started.
Xenomai: real-time nucleus v2.4.10 (Flavor Crystal 7) loaded.
Xenomai: starting native API services.
Xenomai: starting POSIX services.
Xenomai: starting RTDM services.
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
fuse init (API version 7.11)
msgmni has been set to 498
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
aer 0001:41:00.0:pcie12: service driver aer loaded
aer 0001:42:01.0:pcie22: service driver aer loaded
aer 0001:42:02.0:pcie22: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xef600200 (irq = 26) is a 16550A
serial8250.0: ttyS1 at MMIO 0xef600300 (irq = 20) is a 16550A
console [ttyS1] enabled
ef600200.serial: ttyS0 at MMIO 0xef600200 (irq = 26) is a 16550A
ef600300.serial: ttyS1 at MMIO 0xef600300 (irq = 20) is a 16550A
brd: module loaded
Driver 'sd' needs updating - please use bus_type methods
PPC 4xx OCP EMAC driver, version 3.54
irq: irq 10 on host /interrupt-controller mapped to virtual irq 24
irq: irq 11 on host /interrupt-controller mapped to virtual irq 25
irq: irq 0 on host /interrupt-controller1 mapped to virtual irq 27
irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 29
irq: irq 2 on host /interrupt-controller1 mapped to virtual irq 31
MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels
RGMII /plb/opb/emac-rgmii at ef600b00 initialized with MDIO support
irq: irq 24 on host /interrupt-controller mapped to virtual irq 32
irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 33
/plb/opb/emac-rgmii at ef600b00: input 0 in RGMII mode
eth0: EMAC-0 /plb/opb/ethernet at ef600900, MAC 00:90:f9:10:1a:08
eth0: found Marvell 88E1111 Ethernet PHY (0x04)
irq: irq 25 on host /interrupt-controller mapped to virtual irq 34
irq: irq 31 on host /interrupt-controller1 mapped to virtual irq 35
/plb/opb/emac-rgmii at ef600b00: input 1 in RGMII mode
eth1: EMAC-1 /plb/opb/ethernet at ef600a00, MAC 00:90:f9:10:1a:09
eth1: found Marvell 88E1111 Ethernet PHY (0x05)
fc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x8000,blocks=4
erase region 1: offset=0x20000,size=0x20000,blocks=511
RedBoot partition parsing not available
Creating 7 MTD partitions on "fc000000.nor_flash":
0x000000000000-0x000000800000 : "kernel0"
0x000000800000-0x000001000000 : "kernel1"
0x000001000000-0x000001800000 : "kernel2"
0x000001800000-0x000003f40000 : "install"
0x000003f40000-0x000003f60000 : "env0"
0x000003f60000-0x000003f80000 : "env1"
0x000003f80000-0x000004000000 : "u-boot"
irq: irq 8 on host /interrupt-controller mapped to virtual irq 36
spi_ppc4xx_of ef600600.spi: driver initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dwc_otg: version 2.60a 22-NOV-2006
dwc_otg: Shared Tx FIFO mode
dwc_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 21, io mem 0x00000000
dwc_otg: Init: Port Power? op_state=1
dwc_otg: Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 2.6.30.3-00063-g0af2edc-dirty dwc_otg_hcd
usb usb1: SerialNumber: dwc_otg.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
irq: irq 2 on host /interrupt-controller mapped to virtual irq 37
ibm-iic ef600400.i2c: using standard (100 kHz) mode
irq: irq 7 on host /interrupt-controller mapped to virtual irq 38
ibm-iic ef600500.i2c: using standard (100 kHz) mode
lm75: probe of 0-0048 failed with error -121
hwmon-vid: Unknown VRM version of your CPU
PowerPC Book-E Watchdog Timer Loaded
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
usb 1-1: new high speed USB device using dwc_otg and address 2
usb 1-1: New USB device found, idVendor=0634, idProduct=0655
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Real SSD eUSB 2GB
usb 1-1: Manufacturer: Micron Technology
usb 1-1: SerialNumber: 4BF0022700035321
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
eth0: link is down
eth0: link is up, 100 HDX
IP-Config: Complete:
device=eth0, addr=137.237.178.150, mask=255.255.255.0, gw=137.237.178.1,
host=flx-am, domain=, nis-domain=(none),
bootserver=137.237.178.9, rootserver=137.237.178.9, rootpath=
Freeing unused kernel memory: 164k init
at24 0-0050: 512 byte 24c04 EEPROM (writable)
at24 0-0052: 512 byte 24c04 EEPROM (writable)
scsi 0:0:0:0: Direct-Access MICRON eUSB DISK 1110 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
sd 0:0:0:0: [sda] 3964928 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with journal data mode.
at24 0-0050: 512 byte 24c04 EEPROM (writable)
at24 0-0052: 512 byte 24c04 EEPROM (writable)
dx83xx 0001:43:00.0: device not available because of BAR 0 [0xa1000000-0xa1ffffff] collisions
dx83xx: probe of 0001:43:00.0 failed with error -22
dx83xx 0001:44:00.0: device not available because of BAR 0 [0xa3000000-0xa3ffffff] collisions
dx83xx: probe of 0001:44:00.0 failed with error -22
More information about the Linuxppc-dev
mailing list