[PATCH v2] powerpc/85xx: Add P1021MDS board support

[Kumar Gala]

On May 21, 2010, at 9:16 AM, Haiying Wang wrote:

> P1021 is a dual e500v2 core based SOC with:
> * 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board)
> * 2 PCIe Controller
> * 1 USB2.0 controller
> * eSDHC, eSPI, I2C, DUART
> * eLBC (NAND, BCSR, PMC0/1)
> * Security Engine (SEC 3.3.2)
> * Quicc Engine (QE)
> 
> Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
> Signed-off-by: Yu Liu <Yu.Liu at freescale.com>
> ---
> v2: address the comments from Kumar.
> arch/powerpc/boot/dts/p1021mds.dts        |  698 +++++++++++++++++++++++++++++
> arch/powerpc/platforms/85xx/mpc85xx_mds.c |  102 ++++-
> 2 files changed, 797 insertions(+), 3 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1021mds.dts

applied to next

- k