[PATCH 3/9] Add Synopsys DesignWare HS USB OTG Controller driver.

Fushen Chen fchen at apm.com
Wed Jun 30 07:26:56 EST 2010


Core Interface Layer Common Interrupt handlers provides common interrupt
handler for both host controller and peripheral controller.

Signed-off-by: Fushen Chen <fchen at apm.com>
Signed-off-by: Mark Miesfeld <mmiesfeld at apm.com>
---
 drivers/usb/otg/dwc_otg_cil_intr.c |  625 ++++++++++++++++++++++++++++++++++++
 1 files changed, 625 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/otg/dwc_otg_cil_intr.c

diff --git a/drivers/usb/otg/dwc_otg_cil_intr.c b/drivers/usb/otg/dwc_otg_cil_intr.c
new file mode 100644
index 0000000..2e5be88
--- /dev/null
+++ b/drivers/usb/otg/dwc_otg_cil_intr.c
@@ -0,0 +1,625 @@
+/*
+ * DesignWare HS OTG controller driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld at apm.com>
+ *
+ * Based on versions provided by AMCC and Synopsis which are:
+ *	Copyright (C) 2009-2010 AppliedMicro(www.apm.com)
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * The Core Interface Layer provides basic services for accessing and
+ * managing the DWC_otg hardware. These services are used by both the
+ * Host Controller Driver and the Peripheral Controller Driver.
+ *
+ * This file contains the Common Interrupt handlers.
+ */
+
+#include "dwc_otg_regs.h"
+#include "dwc_otg_cil.h"
+
+#include <linux/types.h>
+#include <linux/delay.h>
+
+inline const char *op_state_str(struct core_if *core_if)
+{
+	return (core_if->op_state == A_HOST ? "a_host" :
+		(core_if->op_state == A_SUSPEND ? "a_suspend" :
+		(core_if->op_state == A_PERIPHERAL ? "a_peripheral" :
+		(core_if->op_state == B_PERIPHERAL ? "b_peripheral" :
+		(core_if->op_state == B_HOST ? "b_host" : "unknown")))));
+}
+
+/**
+ *  This function will log a debug message
+ */
+static int dwc_otg_handle_mode_mismatch_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts;
+
+	printk(KERN_WARNING "Mode Mismatch Interrupt: currently in %s mode\n",
+		dwc_otg_mode(core_if) ? "Host" : "Device");
+
+	/* Clear interrupt */
+	gintsts.d32 = 0;
+	gintsts.b.modemismatch = 1;
+	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
+
+	return 1;
+}
+
+/**
+ *  Start the HCD.  Helper function for using the HCD callbacks.
+ */
+static inline void hcd_start(struct core_if *core_if)
+{
+	if (core_if->hcd_cb && core_if->hcd_cb->start)
+		core_if->hcd_cb->start(core_if->hcd_cb->p);
+}
+
+/**
+ *  Stop the HCD.  Helper function for using the HCD callbacks.
+ */
+static inline void hcd_stop(struct core_if *core_if)
+{
+	if (core_if->hcd_cb && core_if->hcd_cb->stop)
+		core_if->hcd_cb->stop(core_if->hcd_cb->p);
+}
+
+/**
+ *  Disconnect the HCD.  Helper function for using the HCD callbacks.
+ */
+static inline void hcd_disconnect(struct core_if *core_if)
+{
+	if (core_if->hcd_cb && core_if->hcd_cb->disconnect)
+		core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
+}
+
+/**
+ *  Inform the HCD the a New Session has begun.  Helper function for using the
+ *  HCD callbacks.
+ */
+static inline void hcd_session_start(struct core_if *core_if)
+{
+	if (core_if->hcd_cb && core_if->hcd_cb->session_start)
+		core_if->hcd_cb->session_start(core_if->hcd_cb->p);
+}
+
+/**
+ *  Start the PCD.  Helper function for using the PCD callbacks.
+ */
+static inline void pcd_start(struct core_if *core_if)
+{
+	if (core_if->pcd_cb && core_if->pcd_cb->start)
+		core_if->pcd_cb->start(core_if->pcd_cb->p);
+}
+
+/**
+ *  Stop the PCD.  Helper function for using the PCD callbacks.
+ */
+static inline void pcd_stop(struct core_if *core_if)
+{
+	if (core_if->pcd_cb && core_if->pcd_cb->stop)
+		core_if->pcd_cb->stop(core_if->pcd_cb->p);
+}
+
+/**
+ *  Suspend the PCD.  Helper function for using the PCD callbacks.
+ */
+static inline void pcd_suspend(struct core_if *core_if)
+{
+	if (core_if->pcd_cb && core_if->pcd_cb->suspend)
+		core_if->pcd_cb->suspend(core_if->pcd_cb->p);
+}
+
+/**
+ *  Resume the PCD.  Helper function for using the PCD callbacks.
+ */
+static inline void pcd_resume(struct core_if *core_if)
+{
+	if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup)
+		core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
+}
+
+/**
+ * This function handles the OTG Interrupts. It reads the OTG
+ * Interrupt Register (GOTGINT) to determine what interrupt has
+ * occurred.
+ */
+static int dwc_otg_handle_otg_intr(struct core_if *core_if)
+{
+	struct core_global_regs *global_regs = core_if->core_global_regs;
+	union gotgint_data gotgint;
+	union gotgctl_data gotgctl;
+	union gintmsk_data gintmsk;
+
+	gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
+	gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
+
+	if (gotgint.b.sesenddet) {
+		gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
+		if (core_if->op_state == B_HOST) {
+			pcd_start(core_if);
+			core_if->op_state = B_PERIPHERAL;
+		} else {
+			/*
+			 * If not B_HOST and Device HNP still set. HNP did not
+			 * succeed
+			 */
+			if (gotgctl.b.devhnpen)
+				printk(KERN_ERR "Device Not Connected / "
+					"Responding\n");
+
+			/*
+			 * If Session End Detected the B-Cable has been
+			 * disconnected.  Reset PCD and Gadget driver to a
+			 * clean state.
+			 */
+			pcd_stop(core_if);
+		}
+		gotgctl.d32 = 0;
+		gotgctl.b.devhnpen = 1;
+		dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
+	}
+	if (gotgint.b.sesreqsucstschng) {
+		gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
+		if (gotgctl.b.sesreqscs) {
+			if (core_if->core_params->phy_type ==
+					DWC_PHY_TYPE_PARAM_FS &&
+					core_if->core_params->i2c_enable) {
+				core_if->srp_success = 1;
+			} else {
+				pcd_resume(core_if);
+
+				/* Clear Session Request */
+				gotgctl.d32 = 0;
+				gotgctl.b.sesreq = 1;
+				dwc_modify_reg32(&global_regs->gotgctl,
+							gotgctl.d32, 0);
+			}
+		}
+	}
+	if (gotgint.b.hstnegsucstschng) {
+		/*
+		 * Print statements during the HNP interrupt handling can cause
+		 * it to fail.
+		 */
+		gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
+		if (gotgctl.b.hstnegscs) {
+			if (dwc_otg_is_host_mode(core_if)) {
+				core_if->op_state = B_HOST;
+
+				/*
+				 * Need to disable SOF interrupt immediately.
+				 * When switching from device to host, the PCD
+				 * interrupt handler won't handle the
+				 * interrupt if host mode is already set. The
+				 * HCD interrupt handler won't get called if
+				 * the HCD state is HALT. This means that the
+				 * interrupt does not get handled and Linux
+				 * complains loudly.
+				 */
+				gintmsk.d32 = 0;
+				gintmsk.b.sofintr = 1;
+				dwc_modify_reg32(&global_regs->gintmsk,
+						gintmsk.d32, 0);
+
+				pcd_stop(core_if);
+
+				/* Initialize the Core for Host mode. */
+				hcd_start(core_if);
+				core_if->op_state = B_HOST;
+			}
+		} else {
+			gotgctl.d32 = 0;
+			gotgctl.b.hnpreq = 1;
+			gotgctl.b.devhnpen = 1;
+			dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
+
+			printk(KERN_ERR "Device Not Connected / Responding\n");
+		}
+	}
+	if (gotgint.b.hstnegdet) {
+		/*
+		 * The disconnect interrupt is set at the same time as
+		 * Host Negotiation Detected.  During the mode
+		 * switch all interrupts are cleared so the disconnect
+		 * interrupt handler will not get executed.
+		 */
+		if (dwc_otg_is_device_mode(core_if)) {
+			hcd_disconnect(core_if);
+			pcd_start(core_if);
+			core_if->op_state = A_PERIPHERAL;
+		} else {
+
+			/*
+			 * Need to disable SOF interrupt immediately. When
+			 * switching from device to host, the PCD interrupt
+			 * handler won't handle the interrupt if host mode is
+			 * already set. The HCD interrupt handler won't get
+			 * called if the HCD state is HALT. This means that
+			 * the interrupt does not get handled and Linux
+			 * complains loudly.
+			 */
+			gintmsk.d32 = 0;
+			gintmsk.b.sofintr = 1;
+			dwc_modify_reg32(&global_regs->gintmsk, gintmsk.d32, 0);
+
+			pcd_stop(core_if);
+			hcd_start(core_if);
+			core_if->op_state = A_HOST;
+		}
+	}
+	if (gotgint.b.adevtoutchng)
+		printk(KERN_INFO  " ++OTG Interrupt: A-Device Timeout "
+				"Change++\n");
+	if (gotgint.b.debdone)
+		printk(KERN_INFO  " ++OTG Interrupt: Debounce Done++\n");
+
+	/* Clear GOTGINT */
+	dwc_write_reg32(&core_if->core_global_regs->gotgint, gotgint.d32);
+	return 1;
+}
+
+/*
+ * Wakeup Workqueue implementation
+ */
+static void port_otg_wqfunc(struct work_struct *work)
+{
+	struct core_if *core_if = container_of(work, struct core_if,
+			usb_port_otg);
+	u32 count = 0;
+	union gotgctl_data gotgctl = {.d32 = 0};
+
+	printk(KERN_INFO "%s\n", __func__);
+	gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
+	if (gotgctl.b.conidsts) {
+		/*
+		 * B-Device connector (device mode) wait for switch to device
+		 * mode.
+		 */
+		while (!dwc_otg_is_device_mode(core_if) && ++count <= 10000) {
+			printk(KERN_INFO "Waiting for Peripheral Mode, "
+				"Mode=%s\n", dwc_otg_is_host_mode(core_if) ?
+				"Host" : "Peripheral");
+			msleep(100);
+		}
+		BUG_ON(count > 10000);
+
+		core_if->op_state = B_PERIPHERAL;
+		dwc_otg_core_init(core_if);
+		dwc_otg_enable_global_interrupts(core_if);
+		pcd_start(core_if);
+	} else {
+		/*
+		 * A-Device connector (host mode) wait for switch to host
+		 * mode.
+		 */
+		while (!dwc_otg_is_host_mode(core_if) && ++count <= 10000) {
+			printk(KERN_INFO "Waiting for Host Mode, Mode=%s\n",
+				dwc_otg_is_host_mode(core_if) ?
+				"Host" : "Peripheral");
+			msleep(100);
+		}
+		BUG_ON(count > 10000);
+
+		core_if->op_state = A_HOST;
+		dwc_otg_core_init(core_if);
+		dwc_otg_enable_global_interrupts(core_if);
+		hcd_start(core_if);
+	}
+}
+
+/**
+ * This function handles the Connector ID Status Change Interrupt.  It
+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
+ * is a Device to Host Mode transition or a Host Mode to Device
+ * Transition.
+ *
+ * This only occurs when the cable is connected/removed from the PHY
+ * connector.
+ */
+static int dwc_otg_handle_conn_id_status_change_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts = {.d32 = 0};
+	union gintmsk_data gintmsk = {.d32 = 0};
+
+	/*
+	 * Need to disable SOF interrupt immediately. If switching from device
+	 * to host, the PCD interrupt handler won't handle the interrupt if
+	 * host mode is already set. The HCD interrupt handler won't get
+	 * called if the HCD state is HALT. This means that the interrupt does
+	 * not get handled and Linux complains loudly.
+	 */
+	gintmsk.b.sofintr = 1;
+	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
+
+	INIT_WORK(&core_if->usb_port_otg, port_otg_wqfunc);
+	schedule_work(&core_if->usb_port_otg);
+
+	/* Set flag and clear interrupt */
+	gintsts.b.conidstschng = 1;
+	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
+	return 1;
+}
+
+/**
+ * This interrupt indicates that a device is initiating the Session
+ * Request Protocol to request the host to turn on bus power so a new
+ * session can begin. The handler responds by turning on bus power. If
+ * the DWC_otg controller is in low power mode, the handler brings the
+ * controller out of low power mode before turning on bus power.
+ */
+static int dwc_otg_handle_session_req_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts;
+
+	if (!dwc_has_feature(core_if, DWC_HOST_ONLY)) {
+		union hprt0_data hprt0;
+
+		if (dwc_otg_is_device_mode(core_if)) {
+			printk(KERN_INFO "SRP: Device mode\n");
+		} else {
+			printk(KERN_INFO "SRP: Host mode\n");
+
+			/* Turn on the port power bit. */
+			hprt0.d32 = dwc_otg_read_hprt0(core_if);
+			hprt0.b.prtpwr = 1;
+			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
+
+			/*
+			 * Start the Connection timer.
+			 * A message can be displayed,
+			 * if connect does not occur within 10 seconds.
+			 */
+			hcd_session_start(core_if);
+		}
+	}
+
+	/* Clear interrupt */
+	gintsts.d32 = 0;
+	gintsts.b.sessreqintr = 1;
+	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
+	return 1;
+}
+
+/**
+ * This interrupt indicates that the DWC_otg controller has detected a
+ * resume or remote wakeup sequence. If the DWC_otg controller is in
+ * low power mode, the handler must brings the controller out of low
+ * power mode. The controller automatically begins resume
+ * signaling. The handler schedules a time to stop resume signaling.
+ */
+static int dwc_otg_handle_wakeup_detected_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts;
+	struct device_if *dev_if = core_if->dev_if;
+
+	if (dwc_otg_is_device_mode(core_if)) {
+		union dctl_data dctl = {.d32 = 0};
+
+		/* Clear the Remote Wakeup Signalling */
+		dctl.b.rmtwkupsig = 1;
+		dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, 0);
+
+		if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup)
+			core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
+	} else {
+		union pcgcctl_data pcgcctl = {.d32 = 0};
+
+		/* Restart the Phy Clock */
+		pcgcctl.b.stoppclk = 1;
+		dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
+		schedule_delayed_work(&core_if->usb_port_wakeup, 10);
+	}
+
+	/* Clear interrupt */
+	gintsts.d32 = 0;
+	gintsts.b.wkupintr = 1;
+	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
+	return 1;
+}
+
+/**
+ * This interrupt indicates that a device has been disconnected from
+ * the root port.
+ */
+static int dwc_otg_handle_disconnect_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts;
+	struct core_global_regs *global_regs = core_if->core_global_regs;
+
+	if (!dwc_has_feature(core_if, DWC_HOST_ONLY)) {
+		if (core_if->op_state == B_HOST) {
+			hcd_disconnect(core_if);
+			pcd_start(core_if);
+			core_if->op_state = B_PERIPHERAL;
+		} else if (dwc_otg_is_device_mode(core_if)) {
+			union gotgctl_data gotgctl = {.d32 = 0};
+
+			gotgctl.d32 =
+				dwc_read_reg32(&global_regs->gotgctl);
+
+			/*
+			 * If HNP is in process, do nothing.
+			 * The OTG "Host Negotiation Detected"
+			 * interrupt will do the mode switch.
+			 * Otherwise, since we are in device mode,
+			 * disconnect and stop the HCD,
+			 * then start the PCD.
+			 */
+			if (!gotgctl.b.devhnpen) {
+				hcd_disconnect(core_if);
+				pcd_start(core_if);
+				core_if->op_state = B_PERIPHERAL;
+			}
+		} else if (core_if->op_state == A_HOST)	{
+			/* A-Cable still connected but device disconnected. */
+			hcd_disconnect(core_if);
+		}
+	}
+	gintsts.d32 = 0;
+	gintsts.b.disconnect = 1;
+	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
+	return 1;
+}
+
+/**
+ * This interrupt indicates that SUSPEND state has been detected on
+ * the USB.
+ *
+ * For HNP the USB Suspend interrupt signals the change from
+ * "a_peripheral" to "a_host".
+ *
+ * When power management is enabled the core will be put in low power
+ * mode.
+ */
+static int dwc_otg_handle_usb_suspend_intr(struct core_if *core_if)
+{
+	union dsts_data dsts;
+	union gintsts_data gintsts;
+	struct device_if *dev_if = core_if->dev_if;
+
+	if (dwc_otg_is_device_mode(core_if)) {
+		/*
+		 * Check the Device status register to determine if the Suspend
+		 * state is active.
+		 */
+		dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
+		/* PCD callback for suspend. */
+		pcd_suspend(core_if);
+	} else {
+		if (core_if->op_state == A_PERIPHERAL) {
+			/* Clear the a_peripheral flag, back to a_host. */
+			pcd_stop(core_if);
+			hcd_start(core_if);
+			core_if->op_state = A_HOST;
+		}
+	}
+
+	/* Clear interrupt */
+	gintsts.d32 = 0;
+	gintsts.b.usbsuspend = 1;
+	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
+	return 1;
+}
+
+/**
+ * This function returns the Core Interrupt register.
+ *
+ * Although the Host Port interrupt (portintr) is documented as host mode
+ * only, it appears to occur in device mode when Port Enable / Disable Changed
+ * bit in HPRT0 is set. The code in dwc_otg_handle_common_intr checks if in
+ * device mode and just clears the interrupt.
+ */
+static inline u32 dwc_otg_read_common_intr(struct core_if *core_if)
+{
+	union gintsts_data gintsts;
+	union gintmsk_data gintmsk;
+	union gintmsk_data gintmsk_common = {.d32 = 0};
+	gintmsk_common.b.wkupintr = 1;
+	gintmsk_common.b.sessreqintr = 1;
+	gintmsk_common.b.conidstschng = 1;
+	gintmsk_common.b.otgintr = 1;
+	gintmsk_common.b.modemismatch = 1;
+	gintmsk_common.b.disconnect = 1;
+	gintmsk_common.b.usbsuspend = 1;
+	gintmsk_common.b.portintr = 1;
+
+	gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
+	gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
+
+	return (gintsts.d32 & gintmsk.d32) & gintmsk_common.d32;
+}
+
+/**
+ * Common interrupt handler.
+ *
+ * The common interrupts are those that occur in both Host and Device mode.
+ * This handler handles the following interrupts:
+ * - Mode Mismatch Interrupt
+ * - Disconnect Interrupt
+ * - OTG Interrupt
+ * - Connector ID Status Change Interrupt
+ * - Session Request Interrupt.
+ * - Resume / Remote Wakeup Detected Interrupt.
+ *
+ * - Host Port Interrupt.  Although this interrupt is documented as only
+ *   occurring in Host mode, it also occurs in Device mode when Port Enable /
+ *   Disable Changed bit in HPRT0 is set. If it is seen here, while in Device
+ *   mode, the interrupt is just cleared.
+ *
+ */
+int dwc_otg_handle_common_intr(struct core_if *core_if)
+{
+	int retval = 0;
+	union gintsts_data gintsts;
+
+	gintsts.d32 = dwc_otg_read_common_intr(core_if);
+
+	if (gintsts.b.modemismatch)
+		retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
+	if (gintsts.b.otgintr)
+		retval |= dwc_otg_handle_otg_intr(core_if);
+	if (gintsts.b.conidstschng)
+		retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
+	if (gintsts.b.disconnect)
+		retval |= dwc_otg_handle_disconnect_intr(core_if);
+	if (gintsts.b.sessreqintr)
+		retval |= dwc_otg_handle_session_req_intr(core_if);
+	if (gintsts.b.wkupintr)
+		retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
+	if (gintsts.b.usbsuspend)
+		retval |= dwc_otg_handle_usb_suspend_intr(core_if);
+
+	if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
+		gintsts.d32 = 0;
+		gintsts.b.portintr = 1;
+		dwc_write_reg32(&core_if->core_global_regs->gintsts,
+				gintsts.d32);
+		retval |= 1;
+		printk(KERN_INFO "RECEIVED PORTINT while in Device mode\n");
+	}
+
+	return retval;
+}
+
-- 
1.6.0.1



More information about the Linuxppc-dev mailing list