Port Linux to ML510

[srikanth krishnakar]

Hi kostas,

You need to verify that the driver version of serial and Ethernet (probably
X-LLTEMAC) provided in the virtex440.dts matches version used in kernel.
Look for "compatible = <version>" in the drivers. You can probably use EDK
11.2 as it is the latest from Xilinx.

Have you generated your own DTS and Bitstream (download.bit) files ?

If not then you should look for suitable download.bit for you kernel.

-Srikant

2010/6/10 kostas padarnitsas <kpada84 at hotmail.com>

>  Hello,
>
> I am trying to port Linux to PowerPC on the ML510 Xilinx board. I am using
> EDK 10.1.3 to build the hardware and also device tree generator and the
> linux kernel from xilinx git. I followed the tutorial from
> http://xilinx.wikidot.com/powerpc-linux but I have no output. I have
> attached my .mhs file and the .dts.  Any ideas what may cause this problem
> because I did the same thing with ML507 and it was working perfectly?
>
> Thanks in advance,
> Kostas
>
> ------------------------------
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up
> now. <https://signup.live.com/signup.aspx?id=60969>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>



-- 
"The Good You Do, The Best You GET"

Regards
Srikanth Krishnakar
**********************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20100610/3a589faa/attachment.htm>