[PATCH 4/5] of/irq: Merge of_irq_map_raw()
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu Jun 10 16:38:51 EST 2010
On Fri, 2010-06-04 at 15:21 -0600, Grant Likely wrote:
> Merge common code between PowerPC and Microblaze
>
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
> CC: Michal Simek <monstr at monstr.eu>
> CC: Wolfram Sang <w.sang at pengutronix.de>
> CC: Stephen Rothwell <sfr at canb.auug.org.au>
Acked-by : Benjamin Herrenschmidt <benh at kernel.crashing.org>
I haven't double checked that the code was absolutely identical... if
you haven't, please do so :-)
Cheers,
Ben.
> CC: microblaze-uclinux at itee.uq.edu.au
> CC: linuxppc-dev at ozlabs.org
> CC: devicetree-discuss at lists.ozlabs.org
> ---
> arch/microblaze/include/asm/prom.h | 21 ----
> arch/microblaze/kernel/prom_parse.c | 176 ---------------------------------
> arch/powerpc/include/asm/prom.h | 21 ----
> arch/powerpc/kernel/prom_parse.c | 171 --------------------------------
> drivers/of/irq.c | 188 +++++++++++++++++++++++++++++++++++
> include/linux/of_irq.h | 2
> 6 files changed, 190 insertions(+), 389 deletions(-)
>
> diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
> index da7069c..89fca70 100644
> --- a/arch/microblaze/include/asm/prom.h
> +++ b/arch/microblaze/include/asm/prom.h
> @@ -94,27 +94,6 @@ extern const void *of_get_mac_address(struct device_node *np);
> */
>
> /**
> - * of_irq_map_raw - Low level interrupt tree parsing
> - * @parent: the device interrupt parent
> - * @intspec: interrupt specifier ("interrupts" property of the device)
> - * @ointsize: size of the passed in interrupt specifier
> - * @addr: address specifier (start of "reg" property of the device)
> - * @out_irq: structure of_irq filled by this function
> - *
> - * Returns 0 on success and a negative number on error
> - *
> - * This function is a low-level interrupt tree walking function. It
> - * can be used to do a partial walk with synthetized reg and interrupts
> - * properties, for example when resolving PCI interrupts when no device
> - * node exist for the parent.
> - *
> - */
> -
> -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
> - u32 ointsize, const u32 *addr,
> - struct of_irq *out_irq);
> -
> -/**
> * of_irq_map_pci - Resolve the interrupt for a PCI device
> * @pdev: the device whose interrupt is to be resolved
> * @out_irq: structure of_irq filled by this function
> diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
> index 946f14d..02ec946 100644
> --- a/arch/microblaze/kernel/prom_parse.c
> +++ b/arch/microblaze/kernel/prom_parse.c
> @@ -653,182 +653,6 @@ struct device_node *of_irq_find_parent_by_phandle(phandle p)
> return of_find_node_by_phandle(p);
> }
>
> -int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
> - const u32 *addr, struct of_irq *out_irq)
> -{
> - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
> - const u32 *tmp, *imap, *imask;
> - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
> - int imaplen, match, i;
> -
> - pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
> - "ointsize=%d\n",
> - parent->full_name, intspec[0], intspec[1], ointsize);
> -
> - ipar = of_node_get(parent);
> -
> - /* First get the #interrupt-cells property of the current cursor
> - * that tells us how to interpret the passed-in intspec. If there
> - * is none, we are nice and just walk up the tree
> - */
> - do {
> - tmp = of_get_property(ipar, "#interrupt-cells", NULL);
> - if (tmp != NULL) {
> - intsize = *tmp;
> - break;
> - }
> - tnode = ipar;
> - ipar = of_irq_find_parent(ipar);
> - of_node_put(tnode);
> - } while (ipar);
> - if (ipar == NULL) {
> - pr_debug(" -> no parent found !\n");
> - goto fail;
> - }
> -
> - pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
> - ipar->full_name, intsize);
> -
> - if (ointsize != intsize)
> - return -EINVAL;
> -
> - /* Look for this #address-cells. We have to implement the old linux
> - * trick of looking for the parent here as some device-trees rely on it
> - */
> - old = of_node_get(ipar);
> - do {
> - tmp = of_get_property(old, "#address-cells", NULL);
> - tnode = of_get_parent(old);
> - of_node_put(old);
> - old = tnode;
> - } while (old && tmp == NULL);
> - of_node_put(old);
> - old = NULL;
> - addrsize = (tmp == NULL) ? 2 : *tmp;
> -
> - pr_debug(" -> addrsize=%d\n", addrsize);
> -
> - /* Now start the actual "proper" walk of the interrupt tree */
> - while (ipar != NULL) {
> - /* Now check if cursor is an interrupt-controller and if it is
> - * then we are done
> - */
> - if (of_get_property(ipar, "interrupt-controller", NULL) !=
> - NULL) {
> - pr_debug(" -> got it !\n");
> - memcpy(out_irq->specifier, intspec,
> - intsize * sizeof(u32));
> - out_irq->size = intsize;
> - out_irq->controller = ipar;
> - of_node_put(old);
> - return 0;
> - }
> -
> - /* Now look for an interrupt-map */
> - imap = of_get_property(ipar, "interrupt-map", &imaplen);
> - /* No interrupt map, check for an interrupt parent */
> - if (imap == NULL) {
> - pr_debug(" -> no map, getting parent\n");
> - newpar = of_irq_find_parent(ipar);
> - goto skiplevel;
> - }
> - imaplen /= sizeof(u32);
> -
> - /* Look for a mask */
> - imask = of_get_property(ipar, "interrupt-map-mask", NULL);
> -
> - /* If we were passed no "reg" property and we attempt to parse
> - * an interrupt-map, then #address-cells must be 0.
> - * Fail if it's not.
> - */
> - if (addr == NULL && addrsize != 0) {
> - pr_debug(" -> no reg passed in when needed !\n");
> - goto fail;
> - }
> -
> - /* Parse interrupt-map */
> - match = 0;
> - while (imaplen > (addrsize + intsize + 1) && !match) {
> - /* Compare specifiers */
> - match = 1;
> - for (i = 0; i < addrsize && match; ++i) {
> - u32 mask = imask ? imask[i] : 0xffffffffu;
> - match = ((addr[i] ^ imap[i]) & mask) == 0;
> - }
> - for (; i < (addrsize + intsize) && match; ++i) {
> - u32 mask = imask ? imask[i] : 0xffffffffu;
> - match =
> - ((intspec[i-addrsize] ^ imap[i])
> - & mask) == 0;
> - }
> - imap += addrsize + intsize;
> - imaplen -= addrsize + intsize;
> -
> - pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
> -
> - /* Get the interrupt parent */
> - newpar = of_irq_find_parent_by_phandle((phandle)*imap);
> - imap++;
> - --imaplen;
> -
> - /* Check if not found */
> - if (newpar == NULL) {
> - pr_debug(" -> imap parent not found !\n");
> - goto fail;
> - }
> -
> - /* Get #interrupt-cells and #address-cells of new
> - * parent
> - */
> - tmp = of_get_property(newpar, "#interrupt-cells", NULL);
> - if (tmp == NULL) {
> - pr_debug(" -> parent lacks "
> - "#interrupt-cells!\n");
> - goto fail;
> - }
> - newintsize = *tmp;
> - tmp = of_get_property(newpar, "#address-cells", NULL);
> - newaddrsize = (tmp == NULL) ? 0 : *tmp;
> -
> - pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
> - newintsize, newaddrsize);
> -
> - /* Check for malformed properties */
> - if (imaplen < (newaddrsize + newintsize))
> - goto fail;
> -
> - imap += newaddrsize + newintsize;
> - imaplen -= newaddrsize + newintsize;
> -
> - pr_debug(" -> imaplen=%d\n", imaplen);
> - }
> - if (!match)
> - goto fail;
> -
> - of_node_put(old);
> - old = of_node_get(newpar);
> - addrsize = newaddrsize;
> - intsize = newintsize;
> - intspec = imap - intsize;
> - addr = intspec - addrsize;
> -
> -skiplevel:
> - /* Iterate again with new parent */
> - pr_debug(" -> new parent: %s\n",
> - newpar ? newpar->full_name : "<>");
> - of_node_put(ipar);
> - ipar = newpar;
> - newpar = NULL;
> - }
> -fail:
> - of_node_put(ipar);
> - of_node_put(old);
> - of_node_put(newpar);
> -
> - return -EINVAL;
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_raw);
> -
> int of_irq_map_one(struct device_node *device,
> int index, struct of_irq *out_irq)
> {
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index 47d41b6..187ef4e 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -123,27 +123,6 @@ extern const void *of_get_mac_address(struct device_node *np);
> extern void of_irq_map_init(unsigned int flags);
>
> /**
> - * of_irq_map_raw - Low level interrupt tree parsing
> - * @parent: the device interrupt parent
> - * @intspec: interrupt specifier ("interrupts" property of the device)
> - * @ointsize: size of the passed in interrupt specifier
> - * @addr: address specifier (start of "reg" property of the device)
> - * @out_irq: structure of_irq filled by this function
> - *
> - * Returns 0 on success and a negative number on error
> - *
> - * This function is a low-level interrupt tree walking function. It
> - * can be used to do a partial walk with synthetized reg and interrupts
> - * properties, for example when resolving PCI interrupts when no device
> - * node exist for the parent.
> - *
> - */
> -
> -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
> - u32 ointsize, const u32 *addr,
> - struct of_irq *out_irq);
> -
> -/**
> * of_irq_map_pci - Resolve the interrupt for a PCI device
> * @pdev: the device whose interrupt is to be resolved
> * @out_irq: structure of_irq filled by this function
> diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
> index 39e977d..89ca7b3 100644
> --- a/arch/powerpc/kernel/prom_parse.c
> +++ b/arch/powerpc/kernel/prom_parse.c
> @@ -731,177 +731,6 @@ void of_irq_map_init(unsigned int flags)
>
> }
>
> -int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
> - const u32 *addr, struct of_irq *out_irq)
> -{
> - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
> - const u32 *tmp, *imap, *imask;
> - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
> - int imaplen, match, i;
> -
> - DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
> - parent->full_name, intspec[0], intspec[1], ointsize);
> -
> - ipar = of_node_get(parent);
> -
> - /* First get the #interrupt-cells property of the current cursor
> - * that tells us how to interpret the passed-in intspec. If there
> - * is none, we are nice and just walk up the tree
> - */
> - do {
> - tmp = of_get_property(ipar, "#interrupt-cells", NULL);
> - if (tmp != NULL) {
> - intsize = *tmp;
> - break;
> - }
> - tnode = ipar;
> - ipar = of_irq_find_parent(ipar);
> - of_node_put(tnode);
> - } while (ipar);
> - if (ipar == NULL) {
> - DBG(" -> no parent found !\n");
> - goto fail;
> - }
> -
> - DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
> -
> - if (ointsize != intsize)
> - return -EINVAL;
> -
> - /* Look for this #address-cells. We have to implement the old linux
> - * trick of looking for the parent here as some device-trees rely on it
> - */
> - old = of_node_get(ipar);
> - do {
> - tmp = of_get_property(old, "#address-cells", NULL);
> - tnode = of_get_parent(old);
> - of_node_put(old);
> - old = tnode;
> - } while(old && tmp == NULL);
> - of_node_put(old);
> - old = NULL;
> - addrsize = (tmp == NULL) ? 2 : *tmp;
> -
> - DBG(" -> addrsize=%d\n", addrsize);
> -
> - /* Now start the actual "proper" walk of the interrupt tree */
> - while (ipar != NULL) {
> - /* Now check if cursor is an interrupt-controller and if it is
> - * then we are done
> - */
> - if (of_get_property(ipar, "interrupt-controller", NULL) !=
> - NULL) {
> - DBG(" -> got it !\n");
> - memcpy(out_irq->specifier, intspec,
> - intsize * sizeof(u32));
> - out_irq->size = intsize;
> - out_irq->controller = ipar;
> - of_node_put(old);
> - return 0;
> - }
> -
> - /* Now look for an interrupt-map */
> - imap = of_get_property(ipar, "interrupt-map", &imaplen);
> - /* No interrupt map, check for an interrupt parent */
> - if (imap == NULL) {
> - DBG(" -> no map, getting parent\n");
> - newpar = of_irq_find_parent(ipar);
> - goto skiplevel;
> - }
> - imaplen /= sizeof(u32);
> -
> - /* Look for a mask */
> - imask = of_get_property(ipar, "interrupt-map-mask", NULL);
> -
> - /* If we were passed no "reg" property and we attempt to parse
> - * an interrupt-map, then #address-cells must be 0.
> - * Fail if it's not.
> - */
> - if (addr == NULL && addrsize != 0) {
> - DBG(" -> no reg passed in when needed !\n");
> - goto fail;
> - }
> -
> - /* Parse interrupt-map */
> - match = 0;
> - while (imaplen > (addrsize + intsize + 1) && !match) {
> - /* Compare specifiers */
> - match = 1;
> - for (i = 0; i < addrsize && match; ++i) {
> - u32 mask = imask ? imask[i] : 0xffffffffu;
> - match = ((addr[i] ^ imap[i]) & mask) == 0;
> - }
> - for (; i < (addrsize + intsize) && match; ++i) {
> - u32 mask = imask ? imask[i] : 0xffffffffu;
> - match =
> - ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
> - }
> - imap += addrsize + intsize;
> - imaplen -= addrsize + intsize;
> -
> - DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
> -
> - /* Get the interrupt parent */
> - newpar = of_irq_find_parent_by_phandle((phandle)*imap);
> - imap++;
> - --imaplen;
> -
> - /* Check if not found */
> - if (newpar == NULL) {
> - DBG(" -> imap parent not found !\n");
> - goto fail;
> - }
> -
> - /* Get #interrupt-cells and #address-cells of new
> - * parent
> - */
> - tmp = of_get_property(newpar, "#interrupt-cells", NULL);
> - if (tmp == NULL) {
> - DBG(" -> parent lacks #interrupt-cells !\n");
> - goto fail;
> - }
> - newintsize = *tmp;
> - tmp = of_get_property(newpar, "#address-cells", NULL);
> - newaddrsize = (tmp == NULL) ? 0 : *tmp;
> -
> - DBG(" -> newintsize=%d, newaddrsize=%d\n",
> - newintsize, newaddrsize);
> -
> - /* Check for malformed properties */
> - if (imaplen < (newaddrsize + newintsize))
> - goto fail;
> -
> - imap += newaddrsize + newintsize;
> - imaplen -= newaddrsize + newintsize;
> -
> - DBG(" -> imaplen=%d\n", imaplen);
> - }
> - if (!match)
> - goto fail;
> -
> - of_node_put(old);
> - old = of_node_get(newpar);
> - addrsize = newaddrsize;
> - intsize = newintsize;
> - intspec = imap - intsize;
> - addr = intspec - addrsize;
> -
> - skiplevel:
> - /* Iterate again with new parent */
> - DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
> - of_node_put(ipar);
> - ipar = newpar;
> - newpar = NULL;
> - }
> - fail:
> - of_node_put(ipar);
> - of_node_put(old);
> - of_node_put(newpar);
> -
> - return -EINVAL;
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_raw);
> -
> #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
> static int of_irq_map_oldworld(struct device_node *device, int index,
> struct of_irq *out_irq)
> diff --git a/drivers/of/irq.c b/drivers/of/irq.c
> index ad569ca..351c87a 100644
> --- a/drivers/of/irq.c
> +++ b/drivers/of/irq.c
> @@ -52,6 +52,194 @@ struct device_node *of_irq_find_parent(struct device_node *child)
> return p;
> }
>
> +/**
> + * of_irq_map_raw - Low level interrupt tree parsing
> + * @parent: the device interrupt parent
> + * @intspec: interrupt specifier ("interrupts" property of the device)
> + * @ointsize: size of the passed in interrupt specifier
> + * @addr: address specifier (start of "reg" property of the device)
> + * @out_irq: structure of_irq filled by this function
> + *
> + * Returns 0 on success and a negative number on error
> + *
> + * This function is a low-level interrupt tree walking function. It
> + * can be used to do a partial walk with synthetized reg and interrupts
> + * properties, for example when resolving PCI interrupts when no device
> + * node exist for the parent.
> + */
> +int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
> + const u32 *addr, struct of_irq *out_irq)
> +{
> + struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
> + const u32 *tmp, *imap, *imask;
> + u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
> + int imaplen, match, i;
> +
> + pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
> + parent->full_name, intspec[0], intspec[1], ointsize);
> +
> + ipar = of_node_get(parent);
> +
> + /* First get the #interrupt-cells property of the current cursor
> + * that tells us how to interpret the passed-in intspec. If there
> + * is none, we are nice and just walk up the tree
> + */
> + do {
> + tmp = of_get_property(ipar, "#interrupt-cells", NULL);
> + if (tmp != NULL) {
> + intsize = *tmp;
> + break;
> + }
> + tnode = ipar;
> + ipar = of_irq_find_parent(ipar);
> + of_node_put(tnode);
> + } while (ipar);
> + if (ipar == NULL) {
> + pr_debug(" -> no parent found !\n");
> + goto fail;
> + }
> +
> + pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
> + ipar->full_name, intsize);
> +
> + if (ointsize != intsize)
> + return -EINVAL;
> +
> + /* Look for this #address-cells. We have to implement the old linux
> + * trick of looking for the parent here as some device-trees rely on it
> + */
> + old = of_node_get(ipar);
> + do {
> + tmp = of_get_property(old, "#address-cells", NULL);
> + tnode = of_get_parent(old);
> + of_node_put(old);
> + old = tnode;
> + } while (old && tmp == NULL);
> + of_node_put(old);
> + old = NULL;
> + addrsize = (tmp == NULL) ? 2 : *tmp;
> +
> + pr_debug(" -> addrsize=%d\n", addrsize);
> +
> + /* Now start the actual "proper" walk of the interrupt tree */
> + while (ipar != NULL) {
> + /* Now check if cursor is an interrupt-controller and if it is
> + * then we are done
> + */
> + if (of_get_property(ipar, "interrupt-controller", NULL) !=
> + NULL) {
> + pr_debug(" -> got it !\n");
> + memcpy(out_irq->specifier, intspec,
> + intsize * sizeof(u32));
> + out_irq->size = intsize;
> + out_irq->controller = ipar;
> + of_node_put(old);
> + return 0;
> + }
> +
> + /* Now look for an interrupt-map */
> + imap = of_get_property(ipar, "interrupt-map", &imaplen);
> + /* No interrupt map, check for an interrupt parent */
> + if (imap == NULL) {
> + pr_debug(" -> no map, getting parent\n");
> + newpar = of_irq_find_parent(ipar);
> + goto skiplevel;
> + }
> + imaplen /= sizeof(u32);
> +
> + /* Look for a mask */
> + imask = of_get_property(ipar, "interrupt-map-mask", NULL);
> +
> + /* If we were passed no "reg" property and we attempt to parse
> + * an interrupt-map, then #address-cells must be 0.
> + * Fail if it's not.
> + */
> + if (addr == NULL && addrsize != 0) {
> + pr_debug(" -> no reg passed in when needed !\n");
> + goto fail;
> + }
> +
> + /* Parse interrupt-map */
> + match = 0;
> + while (imaplen > (addrsize + intsize + 1) && !match) {
> + /* Compare specifiers */
> + match = 1;
> + for (i = 0; i < addrsize && match; ++i) {
> + u32 mask = imask ? imask[i] : 0xffffffffu;
> + match = ((addr[i] ^ imap[i]) & mask) == 0;
> + }
> + for (; i < (addrsize + intsize) && match; ++i) {
> + u32 mask = imask ? imask[i] : 0xffffffffu;
> + match =
> + ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
> + }
> + imap += addrsize + intsize;
> + imaplen -= addrsize + intsize;
> +
> + pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
> +
> + /* Get the interrupt parent */
> + newpar = of_irq_find_parent_by_phandle((phandle)*imap);
> + imap++;
> + --imaplen;
> +
> + /* Check if not found */
> + if (newpar == NULL) {
> + pr_debug(" -> imap parent not found !\n");
> + goto fail;
> + }
> +
> + /* Get #interrupt-cells and #address-cells of new
> + * parent
> + */
> + tmp = of_get_property(newpar, "#interrupt-cells", NULL);
> + if (tmp == NULL) {
> + pr_debug(" -> parent lacks #interrupt-cells!\n");
> + goto fail;
> + }
> + newintsize = *tmp;
> + tmp = of_get_property(newpar, "#address-cells", NULL);
> + newaddrsize = (tmp == NULL) ? 0 : *tmp;
> +
> + pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
> + newintsize, newaddrsize);
> +
> + /* Check for malformed properties */
> + if (imaplen < (newaddrsize + newintsize))
> + goto fail;
> +
> + imap += newaddrsize + newintsize;
> + imaplen -= newaddrsize + newintsize;
> +
> + pr_debug(" -> imaplen=%d\n", imaplen);
> + }
> + if (!match)
> + goto fail;
> +
> + of_node_put(old);
> + old = of_node_get(newpar);
> + addrsize = newaddrsize;
> + intsize = newintsize;
> + intspec = imap - intsize;
> + addr = intspec - addrsize;
> +
> + skiplevel:
> + /* Iterate again with new parent */
> + pr_debug(" -> new parent: %s\n",
> + newpar ? newpar->full_name : "<>");
> + of_node_put(ipar);
> + ipar = newpar;
> + newpar = NULL;
> + }
> + fail:
> + of_node_put(ipar);
> + of_node_put(old);
> + of_node_put(newpar);
> +
> + return -EINVAL;
> +}
> +EXPORT_SYMBOL_GPL(of_irq_map_raw);
> +
> unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
> {
> struct of_irq oirq;
> diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
> index f98b27b..51c520b 100644
> --- a/include/linux/of_irq.h
> +++ b/include/linux/of_irq.h
> @@ -32,6 +32,8 @@ struct of_irq {
>
> extern struct device_node *of_irq_find_parent_by_phandle(phandle p);
> extern struct device_node *of_irq_find_parent(struct device_node *child);
> +extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
> + u32 ointsize, const u32 *addr, struct of_irq *out_irq);
> extern int of_irq_map_one(struct device_node *device, int index,
> struct of_irq *out_irq);
> extern unsigned int irq_create_of_mapping(struct device_node *controller,
More information about the Linuxppc-dev
mailing list