[PATCH 4/5] of/irq: Merge of_irq_map_raw()
Grant Likely
grant.likely at secretlab.ca
Sat Jun 5 07:21:50 EST 2010
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
CC: Michal Simek <monstr at monstr.eu>
CC: Wolfram Sang <w.sang at pengutronix.de>
CC: Stephen Rothwell <sfr at canb.auug.org.au>
CC: Benjamin Herrenschmidt <benh at kernel.crashing.org>
CC: microblaze-uclinux at itee.uq.edu.au
CC: linuxppc-dev at ozlabs.org
CC: devicetree-discuss at lists.ozlabs.org
---
arch/microblaze/include/asm/prom.h | 21 ----
arch/microblaze/kernel/prom_parse.c | 176 ---------------------------------
arch/powerpc/include/asm/prom.h | 21 ----
arch/powerpc/kernel/prom_parse.c | 171 --------------------------------
drivers/of/irq.c | 188 +++++++++++++++++++++++++++++++++++
include/linux/of_irq.h | 2
6 files changed, 190 insertions(+), 389 deletions(-)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index da7069c..89fca70 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -94,27 +94,6 @@ extern const void *of_get_mac_address(struct device_node *np);
*/
/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent: the device interrupt parent
- * @intspec: interrupt specifier ("interrupts" property of the device)
- * @ointsize: size of the passed in interrupt specifier
- * @addr: address specifier (start of "reg" property of the device)
- * @out_irq: structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
- u32 ointsize, const u32 *addr,
- struct of_irq *out_irq);
-
-/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 946f14d..02ec946 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -653,182 +653,6 @@ struct device_node *of_irq_find_parent_by_phandle(phandle p)
return of_find_node_by_phandle(p);
}
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
- const u32 *addr, struct of_irq *out_irq)
-{
- struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const u32 *tmp, *imap, *imask;
- u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
- int imaplen, match, i;
-
- pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
- "ointsize=%d\n",
- parent->full_name, intspec[0], intspec[1], ointsize);
-
- ipar = of_node_get(parent);
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
- if (tmp != NULL) {
- intsize = *tmp;
- break;
- }
- tnode = ipar;
- ipar = of_irq_find_parent(ipar);
- of_node_put(tnode);
- } while (ipar);
- if (ipar == NULL) {
- pr_debug(" -> no parent found !\n");
- goto fail;
- }
-
- pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
- ipar->full_name, intsize);
-
- if (ointsize != intsize)
- return -EINVAL;
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = of_node_get(ipar);
- do {
- tmp = of_get_property(old, "#address-cells", NULL);
- tnode = of_get_parent(old);
- of_node_put(old);
- old = tnode;
- } while (old && tmp == NULL);
- of_node_put(old);
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : *tmp;
-
- pr_debug(" -> addrsize=%d\n", addrsize);
-
- /* Now start the actual "proper" walk of the interrupt tree */
- while (ipar != NULL) {
- /* Now check if cursor is an interrupt-controller and if it is
- * then we are done
- */
- if (of_get_property(ipar, "interrupt-controller", NULL) !=
- NULL) {
- pr_debug(" -> got it !\n");
- memcpy(out_irq->specifier, intspec,
- intsize * sizeof(u32));
- out_irq->size = intsize;
- out_irq->controller = ipar;
- of_node_put(old);
- return 0;
- }
-
- /* Now look for an interrupt-map */
- imap = of_get_property(ipar, "interrupt-map", &imaplen);
- /* No interrupt map, check for an interrupt parent */
- if (imap == NULL) {
- pr_debug(" -> no map, getting parent\n");
- newpar = of_irq_find_parent(ipar);
- goto skiplevel;
- }
- imaplen /= sizeof(u32);
-
- /* Look for a mask */
- imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
- /* If we were passed no "reg" property and we attempt to parse
- * an interrupt-map, then #address-cells must be 0.
- * Fail if it's not.
- */
- if (addr == NULL && addrsize != 0) {
- pr_debug(" -> no reg passed in when needed !\n");
- goto fail;
- }
-
- /* Parse interrupt-map */
- match = 0;
- while (imaplen > (addrsize + intsize + 1) && !match) {
- /* Compare specifiers */
- match = 1;
- for (i = 0; i < addrsize && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match = ((addr[i] ^ imap[i]) & mask) == 0;
- }
- for (; i < (addrsize + intsize) && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match =
- ((intspec[i-addrsize] ^ imap[i])
- & mask) == 0;
- }
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
- /* Get the interrupt parent */
- newpar = of_irq_find_parent_by_phandle((phandle)*imap);
- imap++;
- --imaplen;
-
- /* Check if not found */
- if (newpar == NULL) {
- pr_debug(" -> imap parent not found !\n");
- goto fail;
- }
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- pr_debug(" -> parent lacks "
- "#interrupt-cells!\n");
- goto fail;
- }
- newintsize = *tmp;
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
- pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
- newintsize, newaddrsize);
-
- /* Check for malformed properties */
- if (imaplen < (newaddrsize + newintsize))
- goto fail;
-
- imap += newaddrsize + newintsize;
- imaplen -= newaddrsize + newintsize;
-
- pr_debug(" -> imaplen=%d\n", imaplen);
- }
- if (!match)
- goto fail;
-
- of_node_put(old);
- old = of_node_get(newpar);
- addrsize = newaddrsize;
- intsize = newintsize;
- intspec = imap - intsize;
- addr = intspec - addrsize;
-
-skiplevel:
- /* Iterate again with new parent */
- pr_debug(" -> new parent: %s\n",
- newpar ? newpar->full_name : "<>");
- of_node_put(ipar);
- ipar = newpar;
- newpar = NULL;
- }
-fail:
- of_node_put(ipar);
- of_node_put(old);
- of_node_put(newpar);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
int of_irq_map_one(struct device_node *device,
int index, struct of_irq *out_irq)
{
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 47d41b6..187ef4e 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -123,27 +123,6 @@ extern const void *of_get_mac_address(struct device_node *np);
extern void of_irq_map_init(unsigned int flags);
/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent: the device interrupt parent
- * @intspec: interrupt specifier ("interrupts" property of the device)
- * @ointsize: size of the passed in interrupt specifier
- * @addr: address specifier (start of "reg" property of the device)
- * @out_irq: structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
- u32 ointsize, const u32 *addr,
- struct of_irq *out_irq);
-
-/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 39e977d..89ca7b3 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -731,177 +731,6 @@ void of_irq_map_init(unsigned int flags)
}
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
- const u32 *addr, struct of_irq *out_irq)
-{
- struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const u32 *tmp, *imap, *imask;
- u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
- int imaplen, match, i;
-
- DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
- parent->full_name, intspec[0], intspec[1], ointsize);
-
- ipar = of_node_get(parent);
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
- if (tmp != NULL) {
- intsize = *tmp;
- break;
- }
- tnode = ipar;
- ipar = of_irq_find_parent(ipar);
- of_node_put(tnode);
- } while (ipar);
- if (ipar == NULL) {
- DBG(" -> no parent found !\n");
- goto fail;
- }
-
- DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
-
- if (ointsize != intsize)
- return -EINVAL;
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = of_node_get(ipar);
- do {
- tmp = of_get_property(old, "#address-cells", NULL);
- tnode = of_get_parent(old);
- of_node_put(old);
- old = tnode;
- } while(old && tmp == NULL);
- of_node_put(old);
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : *tmp;
-
- DBG(" -> addrsize=%d\n", addrsize);
-
- /* Now start the actual "proper" walk of the interrupt tree */
- while (ipar != NULL) {
- /* Now check if cursor is an interrupt-controller and if it is
- * then we are done
- */
- if (of_get_property(ipar, "interrupt-controller", NULL) !=
- NULL) {
- DBG(" -> got it !\n");
- memcpy(out_irq->specifier, intspec,
- intsize * sizeof(u32));
- out_irq->size = intsize;
- out_irq->controller = ipar;
- of_node_put(old);
- return 0;
- }
-
- /* Now look for an interrupt-map */
- imap = of_get_property(ipar, "interrupt-map", &imaplen);
- /* No interrupt map, check for an interrupt parent */
- if (imap == NULL) {
- DBG(" -> no map, getting parent\n");
- newpar = of_irq_find_parent(ipar);
- goto skiplevel;
- }
- imaplen /= sizeof(u32);
-
- /* Look for a mask */
- imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
- /* If we were passed no "reg" property and we attempt to parse
- * an interrupt-map, then #address-cells must be 0.
- * Fail if it's not.
- */
- if (addr == NULL && addrsize != 0) {
- DBG(" -> no reg passed in when needed !\n");
- goto fail;
- }
-
- /* Parse interrupt-map */
- match = 0;
- while (imaplen > (addrsize + intsize + 1) && !match) {
- /* Compare specifiers */
- match = 1;
- for (i = 0; i < addrsize && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match = ((addr[i] ^ imap[i]) & mask) == 0;
- }
- for (; i < (addrsize + intsize) && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match =
- ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
- }
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
- /* Get the interrupt parent */
- newpar = of_irq_find_parent_by_phandle((phandle)*imap);
- imap++;
- --imaplen;
-
- /* Check if not found */
- if (newpar == NULL) {
- DBG(" -> imap parent not found !\n");
- goto fail;
- }
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- DBG(" -> parent lacks #interrupt-cells !\n");
- goto fail;
- }
- newintsize = *tmp;
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
- DBG(" -> newintsize=%d, newaddrsize=%d\n",
- newintsize, newaddrsize);
-
- /* Check for malformed properties */
- if (imaplen < (newaddrsize + newintsize))
- goto fail;
-
- imap += newaddrsize + newintsize;
- imaplen -= newaddrsize + newintsize;
-
- DBG(" -> imaplen=%d\n", imaplen);
- }
- if (!match)
- goto fail;
-
- of_node_put(old);
- old = of_node_get(newpar);
- addrsize = newaddrsize;
- intsize = newintsize;
- intspec = imap - intsize;
- addr = intspec - addrsize;
-
- skiplevel:
- /* Iterate again with new parent */
- DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
- of_node_put(ipar);
- ipar = newpar;
- newpar = NULL;
- }
- fail:
- of_node_put(ipar);
- of_node_put(old);
- of_node_put(newpar);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
static int of_irq_map_oldworld(struct device_node *device, int index,
struct of_irq *out_irq)
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index ad569ca..351c87a 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -52,6 +52,194 @@ struct device_node *of_irq_find_parent(struct device_node *child)
return p;
}
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @ointsize: size of the passed in interrupt specifier
+ * @addr: address specifier (start of "reg" property of the device)
+ * @out_irq: structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ */
+int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
+ const u32 *addr, struct of_irq *out_irq)
+{
+ struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ const u32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ int imaplen, match, i;
+
+ pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+ parent->full_name, intspec[0], intspec[1], ointsize);
+
+ ipar = of_node_get(parent);
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+ if (tmp != NULL) {
+ intsize = *tmp;
+ break;
+ }
+ tnode = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tnode);
+ } while (ipar);
+ if (ipar == NULL) {
+ pr_debug(" -> no parent found !\n");
+ goto fail;
+ }
+
+ pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
+ ipar->full_name, intsize);
+
+ if (ointsize != intsize)
+ return -EINVAL;
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = of_node_get(ipar);
+ do {
+ tmp = of_get_property(old, "#address-cells", NULL);
+ tnode = of_get_parent(old);
+ of_node_put(old);
+ old = tnode;
+ } while (old && tmp == NULL);
+ of_node_put(old);
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : *tmp;
+
+ pr_debug(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while (ipar != NULL) {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if (of_get_property(ipar, "interrupt-controller", NULL) !=
+ NULL) {
+ pr_debug(" -> got it !\n");
+ memcpy(out_irq->specifier, intspec,
+ intsize * sizeof(u32));
+ out_irq->size = intsize;
+ out_irq->controller = ipar;
+ of_node_put(old);
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = of_get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if (imap == NULL) {
+ pr_debug(" -> no map, getting parent\n");
+ newpar = of_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if (addr == NULL && addrsize != 0) {
+ pr_debug(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while (imaplen > (addrsize + intsize + 1) && !match) {
+ /* Compare specifiers */
+ match = 1;
+ for (i = 0; i < addrsize && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for (; i < (addrsize + intsize) && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match =
+ ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ newpar = of_irq_find_parent_by_phandle((phandle)*imap);
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if (newpar == NULL) {
+ pr_debug(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ pr_debug(" -> parent lacks #interrupt-cells!\n");
+ goto fail;
+ }
+ newintsize = *tmp;
+ tmp = of_get_property(newpar, "#address-cells", NULL);
+ newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+ pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if (imaplen < (newaddrsize + newintsize))
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ pr_debug(" -> imaplen=%d\n", imaplen);
+ }
+ if (!match)
+ goto fail;
+
+ of_node_put(old);
+ old = of_node_get(newpar);
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+ skiplevel:
+ /* Iterate again with new parent */
+ pr_debug(" -> new parent: %s\n",
+ newpar ? newpar->full_name : "<>");
+ of_node_put(ipar);
+ ipar = newpar;
+ newpar = NULL;
+ }
+ fail:
+ of_node_put(ipar);
+ of_node_put(old);
+ of_node_put(newpar);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
{
struct of_irq oirq;
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index f98b27b..51c520b 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -32,6 +32,8 @@ struct of_irq {
extern struct device_node *of_irq_find_parent_by_phandle(phandle p);
extern struct device_node *of_irq_find_parent(struct device_node *child);
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+ u32 ointsize, const u32 *addr, struct of_irq *out_irq);
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
extern unsigned int irq_create_of_mapping(struct device_node *controller,
More information about the Linuxppc-dev
mailing list