P2020 with BCM53115
Scott Wood
scottwood at freescale.com
Tue Dec 21 05:49:11 EST 2010
On Mon, 20 Dec 2010 13:08:55 -0500
"Dry, Craig" <cdry at mc.com> wrote:
> I am trying to bring up a P2020 board which uses the Broadcom BCM53115 switch in unmanaged mode. The board is patterned after the P2020RDB, except the Vitesse switch has been replaced with a BCM53115. There is no MDIO connection to the switch, but there is an SPI connection available if needed.
>
> When running Uboot, the BCM53115 works just fine, as I am able to download the Linux Kernel and P2020RDB.dtb across the network without issue. But as Linux is booting up, I get the message:
>
> mdio_bus mdio at ffe24520: error probing PHY at address 0
> mdio_bus mdio at ffe24520: error probing PHY at address 1
>
> I expect these errors occur because the P2020RDB.dts file has these entries.
>
> I'm not sure what to try next to get Linux to use the BCM53115 switch in unmanaged mode.
See the fixed-link property in
Documentation/powerpc/dts-bindings/fsl/tsec.txt
-Scott
More information about the Linuxppc-dev
mailing list