AW: PowerPC PCI DMA issues (prefetch/coherency?)
Benjamin Herrenschmidt
benh at kernel.crashing.org
Fri Sep 11 11:57:06 EST 2009
On Wed, 2009-09-09 at 10:10 -0400, Tom Burns wrote:
> Hi Mikhail,
>
> Sorry, this DMA code is in a tasklet. Are you suggesting the processor
> is in supervisor mode at that time? Calling pci_dma_sync_sg_for_cpu()
> from the tasklet context is what generates the OOPS. The entire oops is
> as follows, if it's relevant:
Yes. A tasklet runs in supervisor mode.
> Oops: kernel access of bad area, sig: 11 [#1]
That seems to indicate that your passed an incorrect address to dcbi
(ie, an address that isn't currently mapped, 0x3fd39000 according to
your log), so that looks like a driver bug to me (unless something is
busted in 2.6.24 version of __dma_sync on 44x...)
Cheers,
Ben.
> NIP: c0003ab0 LR: c0010c30 CTR: 02400001
> REGS: df117bd0 TRAP: 0300 Tainted: P (2.6.24.2)
> MSR: 00029000 <EE,ME> CR: 44224042 XER: 20000000
> DEAR: 3fd39000, ESR: 00800000
> TASK = de5db7d0[157] 'cat' THREAD: df116000
> GPR00: e11e5854 df117c80 de5db7d0 3fd39000 02400001 0000001f 00000002
> 0079a169
> GPR08: 00000001 c0310000 00000000 c0010c84 24224042 101c0dac c0310000
> 10177000
> GPR16: deb14200 df116000 e12062d0 e11f6104 de0f16c0 e11f0000 c0310000
> e11f59cc
> GPR24: e11f62d0 e11f0000 e11f0000 00000000 00000002 defee014 3fd39008
> 87d39009
> NIP [c0003ab0] invalidate_dcache_range+0x1c/0x30
> LR [c0010c30] __dma_sync+0x58/0xac
> Call Trace:
> [df117c80] [0000000a] 0xa (unreliable)
> [df117c90] [e11e5854] DoTasklet+0x67c/0xc90 [ideDriverDuo_cyph]
> [df117ce0] [c001ee24] tasklet_action+0x60/0xcc
> [df117cf0] [c001ef04] __do_softirq+0x74/0xe0
> [df117d10] [c00067a8] do_softirq+0x54/0x58
> [df117d20] [c001edb4] irq_exit+0x48/0x58
> [df117d30] [c00069d0] do_IRQ+0x6c/0xc0
> [df117d40] [c00020e0] ret_from_except+0x0/0x18
> [df117e00] [c00501e0] unmap_vmas+0x2c4/0x560
> [df117e90] [c0053ebc] exit_mmap+0x64/0xec
> [df117ec0] [c00171ac] mmput+0x50/0xd4
> [df117ed0] [c001aef8] exit_mm+0x80/0xe0
> [df117ef0] [c001c818] do_exit+0x134/0x6f8
> [df117f30] [c001ce14] do_group_exit+0x38/0x74
> [df117f40] [c0001a80] ret_from_syscall+0x0/0x3c
> Instruction dump:
> 7c0018ac 38630020 4200fff8 7c0004ac 4e800020 38a0001f 7c632878 7c832050
> 7c842a14 5484d97f 4d820020 7c8903a6 <7c001bac> 38630020 4200fff8
> 7c0004ac
> Kernel panic - not syncing: Aiee, killing interrupt handler!
> Rebooting in 180 seconds..
>
>
> Cheers,
> Tom
>
> Mikhail Zolotaryov wrote:
> > Hi Tom,
> >
> > possible solution could be to use tasklet to perform DMA-related job
> > (as in most cases DMA transfer is interrupt driven - makes sense).
> >
> >
> > Tom Burns wrote:
> >> Hi,
> >>
> >> With the default config for the Sequoia board on 2.6.24, calling
> >> pci_dma_sync_sg_for_cpu() results in executing
> >> invalidate_dcache_range() in arch/ppc/kernel/misc.S from
> >> __dma_sync(). This OOPses on PPC440 since it tries to call directly
> >> the assembly instruction dcbi, which can only be executed in
> >> supervisor mode. We tried that before resorting to manual cache line
> >> management with usermode-safe assembly calls.
> >>
> >> Regards,
> >> Tom Burns
> >> International Datacasting Corporation
> >>
> >> Mikhail Zolotaryov wrote:
> >>> Hi,
> >>>
> >>> Why manage cache lines manually, if appropriate code is a part of
> >>> __dma_sync / dma_sync_single_for_device of DMA API ? (implies
> >>> CONFIG_NOT_COHERENT_CACHE enabled, as default for Sequoia Board)
> >>>
> >>> Prodyut Hazarika wrote:
> >>>> Hi Adam,
> >>>>
> >>>>
> >>>>> Yes, I am using the 440EPx (same as the sequoia board). Our
> >>>>> ideDriver is DMA'ing blocks of 192-byte data over the PCI bus
> >>>>>
> >>>> (using
> >>>>
> >>>>> the Sil0680A PCI-IDE bridge). Most of the DMA's (depending on timing)
> >>>>> end up being partially corrupted when we try to parse the data in the
> >>>>> virtual page. We have confirmed the data is good before the PCI-IDE
> >>>>> bridge. We are creating two 8K pages and map them to physical DMA
> >>>>>
> >>>> memory
> >>>>
> >>>>> using single-entry scatter/gather structs. When a DMA block is
> >>>>> corrupted, we see a random portion of it (always a multiple of 16byte
> >>>>> cache lines) is overwritten with old data from the last time the
> >>>>>
> >>>> buffer
> >>>>
> >>>>> was used.
> >>>>
> >>>> This looks like a cache coherency problem.
> >>>> Can you ensure that the TLB entries corresponding to the DMA region
> >>>> has
> >>>> the CacheInhibit bit set.
> >>>> You will need a BDI connected to your system.
> >>>>
> >>>> Also, you will need to invalidate and flush the lines appropriately,
> >>>> since in 440 cores,
> >>>> L1Cache coherency is managed entirely by software.
> >>>> Please look at drivers/net/ibm_newemac/mal.c and core.c for example on
> >>>> how to do it.
> >>>>
> >>>> Thanks
> >>>> Prodyut
> >>>>
> >>>> On Thu, 2009-09-03 at 13:27 -0700, Prodyut Hazarika wrote:
> >>>>
> >>>>> Hi Adam,
> >>>>>
> >>>>>
> >>>>>> Are you sure there is L2 cache on the 440?
> >>>>>>
> >>>>> It depends on the SoC you are using. SoC like 460EX (Canyonlands
> >>>>>
> >>>> board)
> >>>>
> >>>>> have L2Cache.
> >>>>> It seems you are using a Sequoia board, which has a 440EPx SoC.
> >>>>> 440EPx
> >>>>> has a 440 cpu core, but no L2Cache.
> >>>>> Could you please tell me which SoC you are using?
> >>>>> You can also refer to the appropriate dts file to see if there is
> >>>>> L2C.
> >>>>> For example, in canyonlands.dts (460EX based board), we have the L2C
> >>>>> entry.
> >>>>> L2C0: l2c {
> >>>>> ...
> >>>>> }
> >>>>>
> >>>>>
> >>>>>> I am seeing this problem with our custom IDE driver which is
> >>>>>> based on
> >>>>>>
> >>>>
> >>>>
> >>>>>> pretty old code. Our driver uses pci_alloc_consistent() to allocate
> >>>>>>
> >>>> the
> >>>>
> >>>>>> physical DMA memory and alloc_pages() to allocate a virtual page.
> >>>>>> It then uses pci_map_sg() to map to a scatter/gather buffer.
> >>>>>> Perhaps I should convert these to the DMA API calls as you suggest.
> >>>>>>
> >>>>> Could you give more details on the consistency problem? It is a good
> >>>>> idea to change to the new DMA APIs, but pci_alloc_consistent() should
> >>>>> work too
> >>>>>
> >>>>> Thanks
> >>>>> Prodyut On Thu, 2009-09-03 at 19:57 +1000, Benjamin Herrenschmidt
> >>>>> wrote:
> >>>>>
> >>>>>> On Thu, 2009-09-03 at 09:05 +0100, Chris Pringle wrote:
> >>>>>>
> >>>>>>> Hi Adam,
> >>>>>>>
> >>>>>>> If you have a look in include/asm-ppc/pgtable.h for the following
> >>>>>>>
> >>>>> section:
> >>>>>
> >>>>>>> #ifdef CONFIG_44x
> >>>>>>> #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED |
> >>>>>>>
> >>>>> _PAGE_GUARDED)
> >>>>>
> >>>>>>> #else
> >>>>>>> #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
> >>>>>>> #endif
> >>>>>>>
> >>>>>>> Try adding _PAGE_COHERENT to the appropriate line above and see if
> >>>>>>>
> >>>>> that
> >>>>>>> fixes your issue - this causes the 'M' bit to be set on the page
> >>>>>>>
> >>>>> which
> >>>>>>> sure enforce cache coherency. If it doesn't, you'll need to check
> >>>>>>>
> >>>>> the
> >>>>>>> 'M' bit isn't being masked out in head_44x.S (it was originally
> >>>>>>>
> >>>>> masked
> >>>>>>> out on arch/powerpc, but was fixed in later kernels when the cache
> >>>>>>>
> >>>>
> >>>>
> >>>>>>> coherency issues with non-SMP systems were resolved).
> >>>>>>>
> >>>>>> I have some doubts about the usefulness of doing that for 4xx.
> >>>>>>
> >>>> AFAIK,
> >>>>
> >>>>>> the 440 core just ignores M.
> >>>>>>
> >>>>>> The problem lies probably elsewhere. Maybe the L2 cache coherency
> >>>>>>
> >>>>> isn't
> >>>>>
> >>>>>> enabled or not working ?
> >>>>>>
> >>>>>> The L1 cache on 440 is simply not coherent, so drivers have to make
> >>>>>>
> >>>>> sure
> >>>>>
> >>>>>> they use the appropriate DMA APIs which will do cache flushing when
> >>>>>> needed.
> >>>>>>
> >>>>>> Adam, what driver is causing you that sort of problems ?
> >>>>>>
> >>>>>> Cheers,
> >>>>>> Ben.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
More information about the Linuxppc-dev
mailing list