[PATCH] * mpc8313erdb.dts: Fixed eTSEC interrupt assignment.

[Mark Bishop]

Quoting Scott Wood <scottwood at freescale.com>:

> On Fri, Sep 04, 2009 at 12:31:25PM +0200, Roland Lezuo wrote:
>> The following patch is needed to correctly assign the IRQs for the
>> gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped
>> as well as the interrupt lines for the two devices.
>
> And it will incorrectly assign them on older revisions of the chip.
>
> We really should have a u-boot fixup based on SVR.
>
> -Scott
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>

I have both versions of the boards and I use two versions of the .dts  
file.  Actually, four, two to support the old style uboot .dts that  
comes with Freescale's BSP and 2 that support the newer uboot.