[PATCH] * mpc8313erdb.dts: Fixed eTSEC interrupt assignment.

[Kim Phillips]

On Wed, 9 Sep 2009 15:28:01 -0500
Kumar Gala <galak at kernel.crashing.org> wrote:

> 
> On Sep 9, 2009, at 1:22 PM, Scott Wood wrote:
> 
> > On Fri, Sep 04, 2009 at 12:31:25PM +0200, Roland Lezuo wrote:
> >> The following patch is needed to correctly assign the IRQs for the
> >> gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped
> >> as well as the interrupt lines for the two devices.
> >
> > And it will incorrectly assign them on older revisions of the chip.
> >
> > We really should have a u-boot fixup based on SVR.

definitely.

> I felt like Kim did this.

I never got my hands on a Rev. C board.  What's the SVR on it?  I think
this is also valid for Rev. B boards, and I don't have one of those
either.

Kim